[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Re: [Paparazzi-devel] Re: trouble getting started...
From: |
Martin Mueller |
Subject: |
Re: Re: [Paparazzi-devel] Re: trouble getting started... |
Date: |
Wed, 19 Jan 2011 10:02:35 +0100 (MET) |
Hi Thomas,
> without knowing the hardware in detail I would say that if
>
> - other devices are registered on USB in your setup
> - connecting the USB adapter for paparazzi is not registered
>
> then you have to search for problems with the USB adapter,
> not the autopilot. You should see the results of connecting
> any USB device by following the system message log with
>
> tail -f /var/log/messages
>
> typically.
>
> As I guess the picoblade is a USB-serial converter, this
> should be registered on USB independent of what you connect
> on the other side.
> This reminds me of another possible problem. Until the (bus powered)
> USB device is registered and has registered a high current consumption
> ...
the picoblade adapter is an USB-connector to Molex (picoblade) cable, no
electronics included. The TWOGs LPC2148 does have its own USB function (device)
that is used for download, it is not self powered.
Martin
- Re: Re: [Paparazzi-devel] Re: trouble getting started...,
Martin Mueller <=
- Re: Re: [Paparazzi-devel] Re: trouble getting started..., Martin Mueller, 2011/01/19
- Re: Re: [Paparazzi-devel] Re: trouble getting started..., James Spezeski, 2011/01/19
- Re: [Paparazzi-devel] Re: trouble getting started..., Martin Mueller, 2011/01/19
- Re: [Paparazzi-devel] Re: trouble getting started..., James Spezeski, 2011/01/20
- Re: [Paparazzi-devel] Re: trouble getting started..., Chris Gough, 2011/01/20
- Re: [Paparazzi-devel] Re: trouble getting started..., David Carlson, 2011/01/20
- Re: [Paparazzi-devel] Re: trouble getting started..., James Spezeski, 2011/01/22