[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Paparazzi-devel] need help for motor controller with booz
From: |
Dong Zhao |
Subject: |
[Paparazzi-devel] need help for motor controller with booz |
Date: |
Wed, 13 Jul 2011 14:54:47 +0930 |
Hi,
I brought a booz main board for a five rotor UAV. and things follow:
Motor: Brushless Outrunner Motor 245Kv power160, continuous current 60A and max brust curent 78A.
Speed controller: PHOENIX ICE HV 80 brushless speed controller with max volts=50V and max amps=80A.
The problem at this moment is booz only accept I2C signal from speed controller, but i can't find a I2C controller for this 80A motor.
Is this controller available? Where can i buy this speed controller?
OR,
If use both motor and speed controller above, how can i convert the PWM from speed controller to I2C signal?
OR,
If I buy a Lisa/L board instead of the booz board and connect the five controllers to the servos section on the Lisa\L board, is this a solution for this problem?
If I use this way, how to program?
Regards
Dong
- [Paparazzi-devel] need help for motor controller with booz,
Dong Zhao <=