Hello there everyone.
I have my autonomous UAV set and ready but I would like to add an onboard
video camera on it and I have some doubts that some of you may help me
out
on this.
First things first, let me introduce what I have avaible and what I want
to
do.
- I simple want a video camera on my airframe and transmite live video to
my notebook.
- I already bought the following camera:
http://www.fpvflying.com/products/10-x-zoom-UAV-%7B47%7D-FPV-camera.html
So, my doubt is, what else will I need to do it?
First thing I thought is a Rx/Tx, I found some at hobby king, but Im not
sure if it will work with the above camera and I dont know what
difference
does the power make (there a several identical Rx/Tx packs with a poor
quality camera but with diferent power, going from 100mw up to 1500mw).
The other thing is frequency, there are two options there, one with
900Mhz
and the other with 2.4Ghz, I heard 900Mhz system do interfere and
dramasticaly drops the range of 2.4 RC systems (such as mine). But I dont
know about 2.4Ghz, is it good to use for video transmission, is it going
to
work without problems with my 2.4 RC?
(below follows the link of some Rx/Tx from hobbyKing)
============== *Tx/Rx com 900mhz * ==============
*900MHZ 200mW Tx/Rx & 1/3-inch CCD Camera NTSC US$ 57,92*
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=13438
*900MHZ 800mW Tx/Rx & 1/3-inch CCD Camera NTSC US$ 79,79*
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=13442
*900MHZ 1500mW Tx/Rx & 1/3-inch CCD Camera NTSC US$ 107,99*
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=13443
============== *Tx/Rx com 2.4Ghz* ==============
*2.4GHZ 1000mW Tx/Rx & 1/3-inch CCD Camera NTSC US$ 99,99*
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=13444
=========================================================
Will I need anything else?
(ps. I dont need any telemetry on screen, just plain and simple video)
Thanks very much.
Felizardo