[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Paparazzi-devel] Current Sensor
From: |
Romney, Jefferson S |
Subject: |
[Paparazzi-devel] Current Sensor |
Date: |
Wed, 16 May 2012 17:34:55 +0000 |
I just put a current sensor in my Plane with my Yapa, I can read it correctly
with the adc_generic module, but the current reading in the BAT or Energy
messages do not change. This is the part of my airframe file I have:
<section name="BAT">
<define name="ADC_CHANNEL_CURRENT" value="ADC_6" />
<define name="MilliAmpereOfAdc(adc)" value="(36.6*adc)"/>
</section>
Is there anything else I need to add to this to get it working?
- [Paparazzi-devel] Current Sensor,
Romney, Jefferson S <=
- Re: [Paparazzi-devel] Current Sensor, Eduardo lavratti, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor, Eduardo lavratti, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor, Romney, Jefferson S, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor, Timo Drick, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor, Romney, Jefferson S, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor, Romney, Jefferson S, 2012/05/16
Message not available