Hi.
I am simulating some long flights i will do next month
and i noticed something strange.
Although i have set the maximum current correctly and
the simulated current draw is spot on (as measured with
a watt meter) the reported mah consumption is way too
much.
For 5 minutes at 8.5 Amps@ 32% throttle the energy
reported was about 4Ah when it should be at about 0.7 Ah
!!!
Something is wrong or i am doing something wrong....
Here is my relevant airframe file
<section name="BAT">
<define name="VOLTAGE_ADC_A" value="0.009422237"/>
<define name="VOLTAGE_ADC_B" value="0.0"/>
<define name="VoltageOfAdc(adc)" value
="(VOLTAGE_ADC_A * adc + VOLTAGE_ADC_B)"/>
<define name="MILLIAMP_AT_FULL_THROTTLE"
value="40000"/>
<define name="BAT_CAPACITY"
value="18000."/>
<define name="CATASTROPHIC_BAT_LEVEL"
value="10" unit="V"/>
<define name="CRITIC_BAT_LEVEL"
value="12.8" unit="V"/>
<define name="LOW_BAT_LEVEL"
value="13.5" unit="V"/>
<define name="MAX_BAT_LEVEL"
value="16.8" unit="V"/>
</section>