qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-arm] [PATCH v9 4/4] arm_mptimer: Convert to use ptimer


From: Dmitry Osipenko
Subject: [Qemu-arm] [PATCH v9 4/4] arm_mptimer: Convert to use ptimer
Date: Tue, 5 Jan 2016 16:44:26 +0300

Current ARM MPTimer implementation uses QEMUTimer for the actual timer,
this implementation isn't complete and mostly tries to duplicate of what
generic ptimer is already doing fine.

Conversion to ptimer brings the following benefits and fixes:
        - Simple timer pausing implementation
        - Fixes counter value preservation after stopping the timer
        - Code simplification and reduction

Bump VMSD to version 3, since VMState is changed and is not compatible
with the previous implementation.

Signed-off-by: Dmitry Osipenko <address@hidden>
---
 hw/timer/arm_mptimer.c         | 110 ++++++++++++++++++-----------------------
 include/hw/timer/arm_mptimer.h |   4 +-
 2 files changed, 49 insertions(+), 65 deletions(-)

diff --git a/hw/timer/arm_mptimer.c b/hw/timer/arm_mptimer.c
index 3e59c2a..c06da5e 100644
--- a/hw/timer/arm_mptimer.c
+++ b/hw/timer/arm_mptimer.c
@@ -19,8 +19,9 @@
  * with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "hw/ptimer.h"
 #include "hw/timer/arm_mptimer.h"
-#include "qemu/timer.h"
+#include "qemu/main-loop.h"
 #include "qom/cpu.h"
 
 /* This device implements the per-cpu private timer and watchdog block
@@ -47,28 +48,10 @@ static inline uint32_t timerblock_scale(TimerBlock *tb)
     return (((tb->control >> 8) & 0xff) + 1) * 10;
 }
 
-static void timerblock_reload(TimerBlock *tb, int restart)
-{
-    if (tb->count == 0) {
-        return;
-    }
-    if (restart) {
-        tb->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-    }
-    tb->tick += (int64_t)tb->count * timerblock_scale(tb);
-    timer_mod(tb->timer, tb->tick);
-}
-
 static void timerblock_tick(void *opaque)
 {
     TimerBlock *tb = (TimerBlock *)opaque;
     tb->status = 1;
-    if (tb->control & 2) {
-        tb->count = tb->load;
-        timerblock_reload(tb, 0);
-    } else {
-        tb->count = 0;
-    }
     timerblock_update_irq(tb);
 }
 
@@ -76,21 +59,11 @@ static uint64_t timerblock_read(void *opaque, hwaddr addr,
                                 unsigned size)
 {
     TimerBlock *tb = (TimerBlock *)opaque;
-    int64_t val;
     switch (addr) {
     case 0: /* Load */
         return tb->load;
     case 4: /* Counter.  */
-        if (((tb->control & 1) == 0) || (tb->count == 0)) {
-            return 0;
-        }
-        /* Slow and ugly, but hopefully won't happen too often.  */
-        val = tb->tick - qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-        val /= timerblock_scale(tb);
-        if (val < 0) {
-            val = 0;
-        }
-        return val;
+        return ptimer_get_count(tb->timer);
     case 8: /* Control.  */
         return tb->control;
     case 12: /* Interrupt status.  */
@@ -100,6 +73,19 @@ static uint64_t timerblock_read(void *opaque, hwaddr addr,
     }
 }
 
+static void timerblock_run(TimerBlock *tb, uint64_t count, int set_count)
+{
+    if (set_count) {
+        if (((tb->control & 3) == 3) && (count == 0)) {
+            count = tb->load;
+        }
+        ptimer_set_count(tb->timer, count);
+    }
+    if ((tb->control & 1) && (count != 0)) {
+        ptimer_run(tb->timer, !(tb->control & 2));
+    }
+}
+
 static void timerblock_write(void *opaque, hwaddr addr,
                              uint64_t value, unsigned size)
 {
@@ -108,32 +94,34 @@ static void timerblock_write(void *opaque, hwaddr addr,
     switch (addr) {
     case 0: /* Load */
         tb->load = value;
-        /* Fall through.  */
-    case 4: /* Counter.  */
-        if ((tb->control & 1) && tb->count) {
-            /* Cancel the previous timer.  */
-            timer_del(tb->timer);
+        /* Setting load to 0 stops the timer.  */
+        if (tb->load == 0) {
+            ptimer_stop(tb->timer);
         }
-        tb->count = value;
-        if (tb->control & 1) {
-            timerblock_reload(tb, 1);
+        ptimer_set_limit(tb->timer, tb->load, 1);
+        timerblock_run(tb, tb->load, 0);
+        break;
+    case 4: /* Counter.  */
+        /* Setting counter to 0 stops the one-shot timer.  */
+        if (!(tb->control & 2) && (value == 0)) {
+            ptimer_stop(tb->timer);
         }
+        timerblock_run(tb, value, 1);
         break;
     case 8: /* Control.  */
         old = tb->control;
         tb->control = value;
-        if (value & 1) {
-            if ((old & 1) && (tb->count != 0)) {
-                /* Do nothing if timer is ticking right now.  */
-                break;
-            }
-            if (tb->control & 2) {
-                tb->count = tb->load;
-            }
-            timerblock_reload(tb, 1);
-        } else if (old & 1) {
-            /* Shutdown the timer.  */
-            timer_del(tb->timer);
+        /* Timer mode switch requires ptimer to be stopped.  */
+        if ((old & 3) != (tb->control & 3)) {
+            ptimer_stop(tb->timer);
+        }
+        if (!(tb->control & 1)) {
+            break;
+        }
+        ptimer_set_period(tb->timer, timerblock_scale(tb));
+        if ((old & 3) != (tb->control & 3)) {
+            value = ptimer_get_count(tb->timer);
+            timerblock_run(tb, value, 1);
         }
         break;
     case 12: /* Interrupt status.  */
@@ -184,13 +172,12 @@ static const MemoryRegionOps timerblock_ops = {
 
 static void timerblock_reset(TimerBlock *tb)
 {
-    tb->count = 0;
     tb->load = 0;
     tb->control = 0;
     tb->status = 0;
-    tb->tick = 0;
     if (tb->timer) {
-        timer_del(tb->timer);
+        ptimer_stop(tb->timer);
+        ptimer_set_limit(tb->timer, 0, 1);
     }
 }
 
@@ -235,7 +222,8 @@ static void arm_mptimer_realize(DeviceState *dev, Error 
**errp)
      */
     for (i = 0; i < s->num_cpu; i++) {
         TimerBlock *tb = &s->timerblock[i];
-        tb->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, timerblock_tick, tb);
+        QEMUBH *bh = qemu_bh_new(timerblock_tick, tb);
+        tb->timer = ptimer_init(bh);
         sysbus_init_irq(sbd, &tb->irq);
         memory_region_init_io(&tb->iomem, OBJECT(s), &timerblock_ops, tb,
                               "arm_mptimer_timerblock", 0x20);
@@ -245,26 +233,24 @@ static void arm_mptimer_realize(DeviceState *dev, Error 
**errp)
 
 static const VMStateDescription vmstate_timerblock = {
     .name = "arm_mptimer_timerblock",
-    .version_id = 2,
-    .minimum_version_id = 2,
+    .version_id = 3,
+    .minimum_version_id = 3,
     .fields = (VMStateField[]) {
-        VMSTATE_UINT32(count, TimerBlock),
         VMSTATE_UINT32(load, TimerBlock),
         VMSTATE_UINT32(control, TimerBlock),
         VMSTATE_UINT32(status, TimerBlock),
-        VMSTATE_INT64(tick, TimerBlock),
-        VMSTATE_TIMER_PTR(timer, TimerBlock),
+        VMSTATE_PTIMER(timer, TimerBlock),
         VMSTATE_END_OF_LIST()
     }
 };
 
 static const VMStateDescription vmstate_arm_mptimer = {
     .name = "arm_mptimer",
-    .version_id = 2,
-    .minimum_version_id = 2,
+    .version_id = 3,
+    .minimum_version_id = 3,
     .fields = (VMStateField[]) {
         VMSTATE_STRUCT_VARRAY_UINT32(timerblock, ARMMPTimerState, num_cpu,
-                                     2, vmstate_timerblock, TimerBlock),
+                                     3, vmstate_timerblock, TimerBlock),
         VMSTATE_END_OF_LIST()
     }
 };
diff --git a/include/hw/timer/arm_mptimer.h b/include/hw/timer/arm_mptimer.h
index b34cba0..93db61b 100644
--- a/include/hw/timer/arm_mptimer.h
+++ b/include/hw/timer/arm_mptimer.h
@@ -27,12 +27,10 @@
 
 /* State of a single timer or watchdog block */
 typedef struct {
-    uint32_t count;
     uint32_t load;
     uint32_t control;
     uint32_t status;
-    int64_t tick;
-    QEMUTimer *timer;
+    struct ptimer_state *timer;
     qemu_irq irq;
     MemoryRegion iomem;
 } TimerBlock;
-- 
2.6.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]