qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-arm] [Qemu-devel] [Qemu-devel RFC v2 4/4] msf2: Add Emcraft's


From: Alistair Francis
Subject: Re: [Qemu-arm] [Qemu-devel] [Qemu-devel RFC v2 4/4] msf2: Add Emcraft's Smartfusion2 SOM kit.
Date: Fri, 14 Apr 2017 14:12:04 -0700

On Sun, Apr 9, 2017 at 4:19 AM, Subbaraya Sundeep
<address@hidden> wrote:
> Emulated Emcraft's Smartfusion2 System On Module starter
> kit.
>
> Signed-off-by: Subbaraya Sundeep <address@hidden>

Hey Sundeep,

Cool patch, I have some comments below.

> ---
>  default-configs/arm-softmmu.mak |   1 +
>  hw/arm/Makefile.objs            |   2 +-
>  hw/arm/msf2_soc.c               | 141 
> ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 143 insertions(+), 1 deletion(-)
>  create mode 100644 hw/arm/msf2_soc.c
>
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 1e3bd2b..379f7e1 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -121,3 +121,4 @@ CONFIG_ACPI=y
>  CONFIG_SMBIOS=y
>  CONFIG_ASPEED_SOC=y
>  CONFIG_GPIO_KEY=y
> +CONFIG_MSF2=y
> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> index 4c5c4ee..cce2759 100644
> --- a/hw/arm/Makefile.objs
> +++ b/hw/arm/Makefile.objs
> @@ -1,7 +1,7 @@
>  obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o
>  obj-$(CONFIG_DIGIC) += digic_boards.o
>  obj-y += integratorcp.o mainstone.o musicpal.o nseries.o
> -obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
> +obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o msf2_soc.o
>  obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
>  obj-$(CONFIG_ACPI) += virt-acpi-build.o
>  obj-y += netduino2.o
> diff --git a/hw/arm/msf2_soc.c b/hw/arm/msf2_soc.c
> new file mode 100644
> index 0000000..7277b51
> --- /dev/null
> +++ b/hw/arm/msf2_soc.c
> @@ -0,0 +1,141 @@
> +/*
> + * Smartfusion2 SOM starter kit(from Emcraft) emulation.
> + *
> + * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
> + * of this software and associated documentation files (the "Software"), to 
> deal
> + * in the Software without restriction, including without limitation the 
> rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "qemu-common.h"
> +#include "hw/arm/arm.h"
> +#include "exec/address-spaces.h"
> +#include "hw/sysbus.h"
> +#include "hw/char/serial.h"
> +#include "hw/boards.h"
> +#include "sysemu/block-backend.h"
> +#include "hw/ssi/ssi.h"
> +
> +#define MSF2_NUM_USARTS       1
> +#define MSF2_NUM_TIMERS       2
> +
> +#define ENVM_BASE_ADDRESS     0x60000000
> +#define ENVM_SIZE             (128 * 1024)
> +
> +#define DDR_BASE_ADDRESS      0xA0000000
> +#define DDR_SIZE              (64 * 1024 * 1024)
> +
> +#define SRAM_BASE_ADDRESS     0x20000000
> +#define SRAM_SIZE             (64 * 1024)
> +
> +#define MSF2_TIMER_BASE       0x40004000
> +#define MSF2_UART0_BASE       0x40000000
> +#define MSF2_SYSREG_BASE      0x40038000
> +#define MSF2_SPI0_BASE        0x40001000
> +
> +#define MSF2_SPI0_IRQ         2
> +#define MSF2_UART0_IRQ        10
> +#define MSF2_TIMER_IRQ0       14
> +#define MSF2_TIMER_IRQ1       15
> +
> +static void msf2_init(MachineState *machine)
> +{
> +    const char *kernel_filename = NULL;
> +    DeviceState *dev, *nvic;
> +    MemoryRegion *system_memory = get_system_memory();
> +    MemoryRegion *nvm = g_new(MemoryRegion, 1);
> +    MemoryRegion *nvm_alias = g_new(MemoryRegion, 1);
> +    MemoryRegion *sram = g_new(MemoryRegion, 1);
> +    MemoryRegion *ddr = g_new(MemoryRegion, 1);
> +    QemuOpts *machine_opts = qemu_get_machine_opts();
> +    SysBusDevice *busdev;
> +    DriveInfo *dinfo = drive_get_next(IF_MTD);
> +    qemu_irq cs_line;
> +    SSIBus *spi;
> +
> +    kernel_filename = qemu_opt_get(machine_opts, "kernel");

You can just get the kernel filename directly from: machine->kernel_filename

> +
> +    memory_region_init_ram(nvm, NULL, "MSF2.envm", ENVM_SIZE,
> +                           &error_fatal);
> +    memory_region_init_alias(nvm_alias, NULL, "MSF2.flash.alias",
> +                             nvm, 0, ENVM_SIZE);
> +    vmstate_register_ram_global(nvm);
> +
> +    memory_region_set_readonly(nvm, true);
> +    memory_region_set_readonly(nvm_alias, true);
> +
> +    memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, nvm);
> +    memory_region_add_subregion(system_memory, 0, nvm_alias);
> +
> +    memory_region_init_ram(ddr, NULL, "MSF2.ddr", DDR_SIZE,
> +                           &error_fatal);
> +    vmstate_register_ram_global(ddr);
> +    memory_region_add_subregion(system_memory, DDR_BASE_ADDRESS, ddr);
> +
> +    memory_region_init_ram(sram, NULL, "MSF2.sram", SRAM_SIZE,
> +                           &error_fatal);
> +    vmstate_register_ram_global(sram);
> +    memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram);
> +
> +    nvic = armv7m_init(system_memory, ENVM_SIZE, 96,
> +                       kernel_filename, "cortex-m3");
> +
> +       if (serial_hds[0]) {
> +                serial_mm_init(get_system_memory(), MSF2_UART0_BASE, 2,
> +                       qdev_get_gpio_in(nvic, MSF2_UART0_IRQ),
> +                       115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);
> +    }
> +    dev = qdev_create(NULL, "msf2-timer");
> +    qdev_prop_set_uint32(dev, "clock-frequency", 83 * 1000000);
> +    qdev_init_nofail(dev);
> +    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, MSF2_TIMER_BASE);
> +    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
> +                           qdev_get_gpio_in(nvic, MSF2_TIMER_IRQ0));
> +    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1,
> +                           qdev_get_gpio_in(nvic, MSF2_TIMER_IRQ1));
> +
> +    dev = qdev_create(NULL, "msf2-sysreg");
> +    qdev_init_nofail(dev);
> +    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, MSF2_SYSREG_BASE);
> +
> +    dev = qdev_create(NULL, "msf2-spi");
> +    qdev_init_nofail(dev);
> +    busdev = SYS_BUS_DEVICE(dev);
> +    sysbus_mmio_map(busdev, 0, MSF2_SPI0_BASE);
> +    sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(nvic, MSF2_SPI0_IRQ));
> +
> +    spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
> +    dev = ssi_create_slave_no_init(spi, "s25sl12801");
> +    qdev_prop_set_uint8(dev, "spansion-cr2nv", 1);
> +    if (dinfo)
> +               qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo),
> +                                    &error_fatal);
> +    qdev_init_nofail(dev);
> +    cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
> +    sysbus_connect_irq(busdev, 1, cs_line);

Instead of calling all of these in the init function you should split
it up over the machines init and realize function.

Look at the stm32f205_soc or xlnx-zynqmp files for examples of how to do this.

It also moves away from calling qdev_create() and qdev_init_nofail()
and instead manually creates the objects.

Otherwise this patch looks pretty good.

Thanks,

Alistair

> +}
> +
> +static void msf2_machine_init(MachineClass *mc)
> +{
> +    mc->desc = "SmartFusion2 SOM kit from Emcraft";
> +    mc->init = msf2_init;
> +}
> +
> +DEFINE_MACHINE("smartfusion2-som", msf2_machine_init)
> --
> 2.5.0
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]