qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-block] [PATCH for 2.12 1/1] block: allow recursive calling of


From: Denis V. Lunev
Subject: Re: [Qemu-block] [PATCH for 2.12 1/1] block: allow recursive calling of bdrv_set_aio_context
Date: Wed, 28 Mar 2018 18:35:53 +0300
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.6.0

On 03/28/2018 06:31 PM, Max Reitz wrote:
> On 2018-03-27 15:30, Denis V. Lunev wrote:
>> We have received the following assert on QEMU 2.9:
>>
>> (gdb) bt
>> 0  0x00007f6f67d281f7 in __GI_raise ()
>> 1  0x00007f6f67d298e8 in __GI_abort ()
>> 2  0x00007f6f67d21266 in __assert_fail_base ()
>> 3  0x00007f6f67d21312 in __GI___assert_fail ()
>> 4  0x000055a8faf76f9f in bdrv_detach_aio_context ()
>> 5  0x000055a8faf76f68 in bdrv_detach_aio_context ()
>> 6  0x000055a8faf770c6 in bdrv_set_aio_context ()
>> 7  0x000055a8fafb780d in blk_set_aio_context ()
>> 8  0x000055a8faf7af08 in block_job_attached_aio_context ()
>> 9  0x000055a8faf77043 in bdrv_attach_aio_context ()
>> 10 0x000055a8faf770d9 in bdrv_set_aio_context ()
>> 11 0x000055a8fafb780d in blk_set_aio_context ()
>> 12 0x000055a8fad580e7 in virtio_blk_data_plane_stop ()
>> 13 0x000055a8faf11da5 in virtio_bus_stop_ioeventfd ()
>> 14 0x000055a8fad85604 in virtio_vmstate_change ()
>> 15 0x000055a8fae1ba52 in vm_state_notify ()
>> 16 0x000055a8fad273e5 in do_vm_stop ()
>> 17 vm_stop ()
>> 18 0x000055a8face8f28 in main_loop_should_exit ()
>> 19 main_loop ()
>> 20 main ()
>> (gdb)
>>
>> It does not look, that the code is fundumentally different in 2.12.
>>
>> block_job_attached_aio_context() calls backup_attached_aio_context(),
>> which in turn calls bdrv_detach_aio_context() again. This results in
>> assert(!bs->walking_aio_notifiers).
>>
>> The code in mirror is basically the same. The patch replaces boolean
>> condition with incremental counter, which should solve the problem.
>>
>> Signed-off-by: Denis V. Lunev <address@hidden>
>> CC: Kevin Wolf <address@hidden>
>> CC: Max Reitz <address@hidden>
>> ---
>>  include/block/block_int.h |  2 +-
>>  block.c                   | 12 ++++++------
>>  2 files changed, 7 insertions(+), 7 deletions(-)
> Changing this to a counter looks OK to me, but dealing with a recursive
> bdrv_set_aio_context() might be a bit more complicated than that.  It
> calls for trouble if one of the aio_notifiers assigns a different
> AioContext than was just assigned, if nothing else then because we have
> to make sure not to call any other notifier with the old "new" context.
>
> In this case, that shouldn't be an issue because we will simply assign
> the new context again, so it's actually a no-op.  Maybe we could allow
> that case alone, but even then we have to verify it.
>
> Another thing I'm wondering is how this prevents infinite recursion.
> Won't we just call the notifier again which will try to again set its
> BlockBackend's AioContext?
good catch to think about. AIO context here was different that one one top.
I'll come back after more evaluation.

> What is the full case anyway?  The AioContext of the source changes,
> which results in the call of backup's notifier, which will then change
> the AioContext of the target.  So source and target would need to be in
> the same chain if setting target's context conflicts with a context
> change on source.
Unfortunately I do not know :( This has been happened on the customer
site. The only thing we have is coredump, which gives above mentioned
trace.

Den

> Max
>
>> diff --git a/include/block/block_int.h b/include/block/block_int.h
>> index 29cafa4..a290711 100644
>> --- a/include/block/block_int.h
>> +++ b/include/block/block_int.h
>> @@ -613,7 +613,7 @@ struct BlockDriverState {
>>       * BDS may register themselves in this list to be notified of changes
>>       * regarding this BDS's context */
>>      QLIST_HEAD(, BdrvAioNotifier) aio_notifiers;
>> -    bool walking_aio_notifiers; /* to make removal during iteration safe */
>> +    int walking_aio_notifiers; /* to make removal during iteration safe */
>>  
>>      char filename[PATH_MAX];
>>      char backing_file[PATH_MAX]; /* if non zero, the image is a diff of
>> diff --git a/block.c b/block.c
>> index a8da4f2..82cc07b 100644
>> --- a/block.c
>> +++ b/block.c
>> @@ -4739,8 +4739,7 @@ void bdrv_detach_aio_context(BlockDriverState *bs)
>>          return;
>>      }
>>  
>> -    assert(!bs->walking_aio_notifiers);
>> -    bs->walking_aio_notifiers = true;
>> +    bs->walking_aio_notifiers++;
>>      QLIST_FOREACH_SAFE(baf, &bs->aio_notifiers, list, baf_tmp) {
>>          if (baf->deleted) {
>>              bdrv_do_remove_aio_context_notifier(baf);
>> @@ -4751,7 +4750,8 @@ void bdrv_detach_aio_context(BlockDriverState *bs)
>>      /* Never mind iterating again to check for ->deleted.  bdrv_close() will
>>       * remove remaining aio notifiers if we aren't called again.
>>       */
>> -    bs->walking_aio_notifiers = false;
>> +    bs->walking_aio_notifiers--;
>> +    assert(bs->walking_aio_notifiers >= 0);
>>  
>>      if (bs->drv->bdrv_detach_aio_context) {
>>          bs->drv->bdrv_detach_aio_context(bs);
>> @@ -4782,8 +4782,7 @@ void bdrv_attach_aio_context(BlockDriverState *bs,
>>          bs->drv->bdrv_attach_aio_context(bs, new_context);
>>      }
>>  
>> -    assert(!bs->walking_aio_notifiers);
>> -    bs->walking_aio_notifiers = true;
>> +    bs->walking_aio_notifiers++;
>>      QLIST_FOREACH_SAFE(ban, &bs->aio_notifiers, list, ban_tmp) {
>>          if (ban->deleted) {
>>              bdrv_do_remove_aio_context_notifier(ban);
>> @@ -4791,7 +4790,8 @@ void bdrv_attach_aio_context(BlockDriverState *bs,
>>              ban->attached_aio_context(new_context, ban->opaque);
>>          }
>>      }
>> -    bs->walking_aio_notifiers = false;
>> +    bs->walking_aio_notifiers--;
>> +    assert(bs->walking_aio_notifiers >= 0);
>>  }
>>  
>>  void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
>>
>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]