[Qemu-block] [PATCH v2 2/5] pflash: flush rom device memory region

[Stefan Hajnoczi]

pflash devices should mark the memory region dirty and invalidate TBs
after directly writing to the RAM backing the ROM device.

Note that pflash_cfi01_get_memory() is used by several machine types to
populate ROM contents directly.  Callers are untouched by this patch
because they only modify memory before the guest is started.

Signed-off-by: Stefan Hajnoczi <address@hidden>
---
 hw/block/pflash_cfi01.c | 5 +++++
 hw/block/pflash_cfi02.c | 8 ++++++++
 2 files changed, 13 insertions(+)

diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
index bffb4c40e7..5301c11c18 100644
--- a/hw/block/pflash_cfi01.c
+++ b/hw/block/pflash_cfi01.c
@@ -446,6 +446,7 @@ static inline void pflash_data_write(pflash_t *pfl, hwaddr 
offset,
         break;
     }
 
+    memory_region_flush_rom_device(&pfl->mem, offset, width);
 }
 
 static void pflash_write(pflash_t *pfl, hwaddr offset,
@@ -482,6 +483,8 @@ static void pflash_write(pflash_t *pfl, hwaddr offset,
             if (!pfl->ro) {
                 memset(p + offset, 0xff, pfl->sector_len);
                 pflash_update(pfl, offset, pfl->sector_len);
+                memory_region_flush_rom_device(&pfl->mem, offset,
+                                               pfl->sector_len);
             } else {
                 pfl->status |= 0x20; /* Block erase error */
             }
@@ -763,6 +766,8 @@ static void pflash_cfi01_realize(DeviceState *dev, Error 
**errp)
             error_setg(errp, "failed to read the initial flash content");
             return;
         }
+
+        memory_region_flush_rom_device(&pfl->mem, 0, total_len);
     }
 
     /* Default to devices being used at their maximum device width. This was
diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c
index 0f8b7b8c7b..d04572eca4 100644
--- a/hw/block/pflash_cfi02.c
+++ b/hw/block/pflash_cfi02.c
@@ -378,6 +378,8 @@ static void pflash_write (pflash_t *pfl, hwaddr offset,
                     pflash_update(pfl, offset, 4);
                     break;
                 }
+
+                memory_region_flush_rom_device(&pfl->orig_mem, offset, width);
             }
             pfl->status = 0x00 | ~(value & 0x80);
             /* Let's pretend write is immediate */
@@ -426,6 +428,8 @@ static void pflash_write (pflash_t *pfl, hwaddr offset,
             if (!pfl->ro) {
                 memset(pfl->storage, 0xFF, pfl->chip_len);
                 pflash_update(pfl, 0, pfl->chip_len);
+                memory_region_flush_rom_device(&pfl->orig_mem, 0,
+                                               pfl->chip_len);
             }
             pfl->status = 0x00;
             /* Let's wait 5 seconds before chip erase is done */
@@ -441,6 +445,8 @@ static void pflash_write (pflash_t *pfl, hwaddr offset,
             if (!pfl->ro) {
                 memset(p + offset, 0xFF, pfl->sector_len);
                 pflash_update(pfl, offset, pfl->sector_len);
+                memory_region_flush_rom_device(&pfl->orig_mem, offset,
+                                               pfl->sector_len);
             }
             pfl->status = 0x00;
             /* Let's wait 1/2 second before sector erase is done */
@@ -590,6 +596,8 @@ static void pflash_cfi02_realize(DeviceState *dev, Error 
**errp)
             error_setg(errp, "failed to read the initial flash content");
             return;
         }
+
+        memory_region_flush_rom_device(&pfl->orig_mem, 0, chip_len);
     }
 
     pflash_setup_mappings(pfl);
-- 
2.20.1