[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] 2.6 kernel + new timing code + kqemu (-kernel-kqemu)
From: |
Lonnie Mendez |
Subject: |
Re: [Qemu-devel] 2.6 kernel + new timing code + kqemu (-kernel-kqemu) |
Date: |
Fri, 14 Jul 2006 14:10:28 -0500 |
On Fri, 2006-07-14 at 20:50 +0200, Fabrice Bellard wrote:
> Lonnie Mendez wrote:
> > I ran a limited test with the new code to see what works. All tests run
> > with kqemu enabled binary (1.3.0pre9). Host is a laptop w/ pentium 3
> > mobile processor running ubuntu linux.
> >
> > deb-sid (2.6.17-1-686 SMP):
> >
> > qemu -hda deb-sid.qcow -no-kqemu
> > boots to login prompt
> >
> > qemu -hda deb-sid.qcow
> > boots to login prompt
> >
> > qemu -hda deb-sid.qcow -kernel-kqemu
> > hangs on boot with:
> >
> > hda: QEMU HARDDISK, ATA DISK drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
> > ide1 at 0x170-0x177,0x376 on irq 15
> > hda: max request size: 512KiB
> > hda: 6291456 sectors (3221 MB) w/256KiB Cache, CHS=6241/255/63, (U)DMA
> > hda: lost interrupt
> > hda: lost interrupt
> > hda: lost interrupt
> > hda: set_multmode: status=0x41 { DriveReady Error }
> > hda: set_multmode: error=0x04 { DriveStatusError }
> > ide: failed opcode was: 0xef
> > ... hangs ...
>
> Did you have the same problem before the timer patch ?
No. The problem is not evident with qemu 0.8.1 release and CVS
checkouts from before the timer patch.