qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH] Fix multiple floppy controller issues


From: Hervé Poussineau
Subject: [Qemu-devel] [PATCH] Fix multiple floppy controller issues
Date: Tue, 12 Feb 2008 18:09:16 +0100
User-agent: Thunderbird 2.0.0.9 (Windows/20071031)

Hi,

Attached patch fixes some issues in the floppy disk controller:
- Enhance reset support (external and software)
- Use MAX_FD constant when possible
- Support up to 4 drives if MAX_FD is set to 4
- Fix DOR register, which should be writable at any time
- Let MSR return 0x20 when non-DMA transfer is happening
- Don't assume caller wants to read whole track at once
- Add seek to next sector when in non-DMA mode

Credits to Stuart Brady to help me to debug some issues...

Hervé

Index: fdc.c
===================================================================
RCS file: /sources/qemu/qemu/hw/fdc.c,v
retrieving revision 1.37
diff -u -r1.37 fdc.c
--- fdc.c       1 Jan 2008 17:06:38 -0000       1.37
+++ fdc.c       12 Feb 2008 17:02:17 -0000
@@ -306,10 +306,9 @@
     drv->drflags &= ~FDRIVE_MOTOR_ON;
 }
 
-/* Re-initialise a drives (motor off, repositioned) */
+/* Re-initialise a drive (repositioned) */
 static void fd_reset (fdrive_t *drv)
 {
-    fd_stop(drv);
     fd_recalibrate(drv);
 }
 
@@ -402,7 +401,7 @@
     /* Sun4m quirks? */
     int sun4m;
     /* Floppy drives */
-    fdrive_t drives[2];
+    fdrive_t drives[MAX_FD];
 };
 
 static uint32_t fdctrl_read (void *opaque, uint32_t reg)
@@ -622,20 +621,16 @@
     fdctrl->dma_chann = dma_chann;
     fdctrl->io_base = io_base;
     fdctrl->config = 0x60; /* Implicit seek, polling & FIFO enabled */
-    if (fdctrl->dma_chann != -1) {
-        fdctrl->dma_en = 1;
+    if (fdctrl->dma_chann != -1)
         DMA_register_channel(dma_chann, &fdctrl_transfer_handler, fdctrl);
-    } else {
-        fdctrl->dma_en = 0;
-    }
-    for (i = 0; i < 2; i++) {
+    for (i = 0; i < MAX_FD; i++) {
         fd_init(&fdctrl->drives[i], fds[i]);
     }
     fdctrl_reset(fdctrl, 0);
     fdctrl->state = FD_CTRL_ACTIVE;
     register_savevm("fdc", io_base, 1, fdc_save, fdc_load, fdctrl);
     qemu_register_reset(fdctrl_external_reset, fdctrl);
-    for (i = 0; i < 2; i++) {
+    for (i = 0; i < MAX_FD; i++) {
         fd_revalidate(&fdctrl->drives[i]);
     }
 
@@ -735,6 +730,7 @@
     fdctrl_reset_fifo(fdctrl);
     if (do_irq)
         fdctrl_raise_irq(fdctrl, 0xc0);
+    fdctrl->dma_en = (fdctrl->dma_chann != -1) ? 1 : 0;
 }
 
 static inline fdrive_t *drv0 (fdctrl_t *fdctrl)
@@ -744,12 +740,41 @@
 
 static inline fdrive_t *drv1 (fdctrl_t *fdctrl)
 {
-    return &fdctrl->drives[1 - fdctrl->bootsel];
+    if (fdctrl->bootsel < 1)
+        return &fdctrl->drives[1];
+    else
+        return &fdctrl->drives[0];
+}
+
+#if MAX_FD >= 4
+static inline fdrive_t *drv2 (fdctrl_t *fdctrl)
+{
+    if (fdctrl->bootsel < 2)
+        return &fdctrl->drives[2];
+    else
+        return &fdctrl->drives[1];
 }
 
+static inline fdrive_t *drv3 (fdctrl_t *fdctrl)
+{
+    if (fdctrl->bootsel < 3)
+        return &fdctrl->drives[3];
+    else
+        return &fdctrl->drives[2];
+}
+#endif
+
 static fdrive_t *get_cur_drv (fdctrl_t *fdctrl)
 {
-    return fdctrl->cur_drv == 0 ? drv0(fdctrl) : drv1(fdctrl);
+    switch (fdctrl->cur_drv) {
+        case 0: return drv0(fdctrl);
+        case 1: return drv1(fdctrl);
+#if MAX_FD >= 4
+        case 2: return drv2(fdctrl);
+        case 3: return drv3(fdctrl);
+#endif
+        default: return NULL;
+    }
 }
 
 /* Status B register : 0x01 (read-only) */
@@ -765,9 +790,15 @@
     uint32_t retval = 0;
 
     /* Drive motors state indicators */
-    if (drv0(fdctrl)->drflags & FDRIVE_MOTOR_ON)
-        retval |= 1 << 5;
+#if MAX_FD >= 4
+    if (drv3(fdctrl)->drflags & FDRIVE_MOTOR_ON)
+        retval |= 1 << 7;
+    if (drv2(fdctrl)->drflags & FDRIVE_MOTOR_ON)
+        retval |= 1 << 6;
+#endif
     if (drv1(fdctrl)->drflags & FDRIVE_MOTOR_ON)
+        retval |= 1 << 5;
+    if (drv0(fdctrl)->drflags & FDRIVE_MOTOR_ON)
         retval |= 1 << 4;
     /* DMA enable */
     retval |= fdctrl->dma_en << 3;
@@ -782,15 +813,18 @@
 
 static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value)
 {
-    /* Reset mode */
-    if (fdctrl->state & FD_CTRL_RESET) {
-        if (!(value & 0x04)) {
-            FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
-            return;
-        }
-    }
     FLOPPY_DPRINTF("digital output register set to 0x%02x\n", value);
     /* Drive motors state indicators */
+#if MAX_FD >= 4
+    if (value & 0x80)
+        fd_start(drv3(fdctrl));
+    else
+        fd_stop(drv3(fdctrl));
+    if (value & 0x40)
+        fd_start(drv2(fdctrl));
+    else
+        fd_stop(drv2(fdctrl));
+#endif
     if (value & 0x20)
         fd_start(drv1(fdctrl));
     else
@@ -818,7 +852,11 @@
         }
     }
     /* Selected drive */
+#if MAX_FD >= 4
+    fdctrl->cur_drv = value & 3;
+#else
     fdctrl->cur_drv = value & 1;
+#endif
 }
 
 /* Tape drive register : 0x03 */
@@ -843,7 +881,11 @@
     }
     FLOPPY_DPRINTF("tape drive register set to 0x%02x\n", value);
     /* Disk boot selection indicator */
+#if MAX_FD >= 4
+    fdctrl->bootsel = (value >> 2) & 3;
+#else
     fdctrl->bootsel = (value >> 2) & 1;
+#endif
     /* Tape indicators: never allow */
 }
 
@@ -860,7 +902,10 @@
         if (fdctrl->data_dir == FD_DIR_READ)
             retval |= 0x40;
     }
-    /* Should handle 0x20 for SPECIFY command */
+    /* Non-DMA indicator */
+    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA &&
+        !fdctrl->dma_en)
+        retval |= 0x20;
     /* Command busy indicator */
     if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA ||
         FD_STATE(fdctrl->data_state) == FD_STATE_STATUS)
@@ -956,6 +1001,40 @@
 #endif
 }
 
+/* Seek to next sector */
+static int fdctrl_seek_to_next_sect (fdctrl_t *fdctrl, fdrive_t *cur_drv)
+{
+    FLOPPY_DPRINTF("seek to next sector (%d %02x %02x => %d)\n",
+                   cur_drv->head, cur_drv->track, cur_drv->sect,
+                   fd_sector(cur_drv));
+    /* XXX: cur_drv->sect >= cur_drv->last_sect should be an
+       error in fact */
+    if (cur_drv->sect >= cur_drv->last_sect ||
+        cur_drv->sect == fdctrl->eot) {
+        cur_drv->sect = 1;
+        if (FD_MULTI_TRACK(fdctrl->data_state)) {
+            if (cur_drv->head == 0 &&
+                (cur_drv->flags & FDISK_DBL_SIDES) != 0) {
+                cur_drv->head = 1;
+            } else {
+                cur_drv->head = 0;
+                cur_drv->track++;
+                if ((cur_drv->flags & FDISK_DBL_SIDES) == 0)
+                    return 0;
+            }
+        } else {
+            cur_drv->track++;
+            return 0;
+        }
+        FLOPPY_DPRINTF("seek to next track (%d %02x %02x => %d)\n",
+                       cur_drv->head, cur_drv->track,
+                       cur_drv->sect, fd_sector(cur_drv));
+    } else {
+        cur_drv->sect++;
+    }
+    return 1;
+}
+
 /* Callback for transfer end (stop or abort) */
 static void fdctrl_stop_transfer (fdctrl_t *fdctrl, uint8_t status0,
                                   uint8_t status1, uint8_t status2)
@@ -1042,9 +1121,9 @@
     } else {
         int tmp;
         fdctrl->data_len = 128 << (fdctrl->fifo[5] > 7 ? 7 : fdctrl->fifo[5]);
-        tmp = (cur_drv->last_sect - ks + 1);
+        tmp = (fdctrl->fifo[6] - ks + 1);
         if (fdctrl->fifo[0] & 0x80)
-            tmp += cur_drv->last_sect;
+            tmp += fdctrl->fifo[6];
         fdctrl->data_len *= tmp;
     }
     fdctrl->eot = fdctrl->fifo[6];
@@ -1178,35 +1257,8 @@
         rel_pos = fdctrl->data_pos % FD_SECTOR_LEN;
         if (rel_pos == 0) {
             /* Seek to next sector */
-            FLOPPY_DPRINTF("seek to next sector (%d %02x %02x => %d) (%d)\n",
-                           cur_drv->head, cur_drv->track, cur_drv->sect,
-                           fd_sector(cur_drv),
-                           fdctrl->data_pos - len);
-            /* XXX: cur_drv->sect >= cur_drv->last_sect should be an
-               error in fact */
-            if (cur_drv->sect >= cur_drv->last_sect ||
-                cur_drv->sect == fdctrl->eot) {
-                cur_drv->sect = 1;
-                if (FD_MULTI_TRACK(fdctrl->data_state)) {
-                    if (cur_drv->head == 0 &&
-                        (cur_drv->flags & FDISK_DBL_SIDES) != 0) {
-                        cur_drv->head = 1;
-                    } else {
-                        cur_drv->head = 0;
-                        cur_drv->track++;
-                        if ((cur_drv->flags & FDISK_DBL_SIDES) == 0)
-                            break;
-                    }
-                } else {
-                    cur_drv->track++;
-                    break;
-                }
-                FLOPPY_DPRINTF("seek to next track (%d %02x %02x => %d)\n",
-                               cur_drv->head, cur_drv->track,
-                               cur_drv->sect, fd_sector(cur_drv));
-            } else {
-                cur_drv->sect++;
-            }
+            if (!fdctrl_seek_to_next_sect(fdctrl, cur_drv))
+                break;
         }
     }
  end_transfer:
@@ -1244,6 +1296,8 @@
     if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
         pos %= FD_SECTOR_LEN;
         if (pos == 0) {
+            if (fdctrl->data_pos != 0)
+                fdctrl_seek_to_next_sect(fdctrl, cur_drv);
             len = fdctrl->data_len - fdctrl->data_pos;
             if (len > FD_SECTOR_LEN)
                 len = FD_SECTOR_LEN;


reply via email to

[Prev in Thread] Current Thread [Next in Thread]