[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial
From: |
Aurelien Jarno |
Subject: |
Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial |
Date: |
Tue, 13 Jan 2009 22:41:42 +0100 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Tue, Jan 13, 2009 at 09:46:09PM +0100, Laurent Vivier wrote:
>
> Le 13 janv. 09 à 18:03, Aurelien Jarno a écrit :
>
>> On Mon, Jan 12, 2009 at 10:59:11PM +0200, Blue Swirl wrote:
>>> On 1/12/09, Aurelien Jarno <address@hidden> wrote:
>>>> On Mon, Jan 12, 2009 at 09:40:49PM +0100, Aurelien Jarno wrote:
>>>>> On Mon, Jan 12, 2009 at 10:32:43PM +0200, Blue Swirl wrote:
>>>>>> On 1/12/09, Aurelien Jarno <address@hidden> wrote:
>>>>>>> On Mon, Jan 12, 2009 at 05:40:24PM +0000, Blue Swirl wrote:
>>>>>>
>>>>
>>>>>> Strange, at least Debian 3.1 R8 (CD and direct -kernel), Debian
>>>>>> 4.0 R5
>>>>>> (CD and direct -kernel), Debian 4.0 R6 and Gentoo 2008.0 act like
>>>>>> before.
>>>>>
>>>>> I have the same problem with a CDROM, an hard disk, -kernel.
>>>>>
>>>>>> What kind of setup do you have? At least OpenBIOS config is not
>>>>>> standard, you have enabled PCI debugging.
>>>>>
>>>>> I have built OpenBIOS by hand, native build. This is the
>>>>> unmodified SVN.
>>>>>
>>>>
>>>>
>>>> The PCI debugging is enabled by default on the native build, and
>>>> disable
>>>> on the cross-build. Disabling the PCI code fixes (or workarounds?)
>>>> the
>>>> problem.
>>>
>>> It looks like the address of the boot serial is bad, if I change it
>>> to
>>> 0x7f013000, PCI debug output works. Maybe something maps over the
>>> address at some point.
>>
>> 0x80013000 is in the middle of the PCI space, so you are hitting
>> another
>> device, probably the VGA card. 0x7f013000 is unused but we have to
>> limit
>> the memory to 2032MiB
>
>
> Maximum ram size of G3/beige is 768 MB:
>
> http://apple-history.com/?page=gallery&model=g3
>
Agreed, but a Linux kernel works perfectly with up to 2037MB(*) on the
emulated version of the machine. I don't think it is really useful to
limit the size of the memory to 768MB in QEMU.
Aurelien
(*) The PCI bus is mapped at 0x80000000. At the end of the RAM we load
the video bios (video.x). BTW, I don't know if Mac OS uses that but
Linux doesn't use it.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' address@hidden | address@hidden
`- people.debian.org/~aurel32 | www.aurel32.net
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, (continued)
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Aurelien Jarno, 2009/01/12
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Blue Swirl, 2009/01/12
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Aurelien Jarno, 2009/01/12
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Aurelien Jarno, 2009/01/13
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Blue Swirl, 2009/01/13
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Aurelien Jarno, 2009/01/13
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Blue Swirl, 2009/01/13
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Aurelien Jarno, 2009/01/13
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Laurent Vivier, 2009/01/13
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Laurent Vivier, 2009/01/13
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial,
Aurelien Jarno <=
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Blue Swirl, 2009/01/12
- Re: [Qemu-devel] [6271] Use ESCC for PowerMac serial, Aurelien Jarno, 2009/01/12