qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 08/15] add option to disable wmware devices


From: quintela
Subject: [Qemu-devel] [PATCH 08/15] add option to disable wmware devices
Date: Tue, 23 Jun 2009 16:14:06 +0200

From: Juan Quintela <address@hidden>


Signed-off-by: Juan Quintela <address@hidden>
---
 Makefile.target |    6 ++++--
 configure       |   15 +++++++++++++++
 hw/pc.c         |    4 ++++
 hw/pckbd.c      |    4 ++--
 4 files changed, 25 insertions(+), 4 deletions(-)

diff --git a/Makefile.target b/Makefile.target
index 878294d..55575a1 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -588,8 +588,10 @@ OBJS+= cirrus_vga.o apic.o ioapic.o parallel.o acpi.o 
piix_pci.o
 ifdef CONFIG_USB
 OBJS+= usb-uhci.o
 endif
-OBJS+= vmmouse.o vmport.o vmware_vga.o hpet.o
-OBJS += device-hotplug.o pci-hotplug.o smbios.o
+ifdef CONFIG_VMWARE
+OBJS+= vmmouse.o vmport.o vmware_vga.o
+endif
+OBJS+= device-hotplug.o pci-hotplug.o smbios.o hpet.o
 CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
 endif
 ifeq ($(TARGET_BASE_ARCH), ppc)
diff --git a/configure b/configure
index 4a1fb45..5554934 100755
--- a/configure
+++ b/configure
@@ -194,6 +194,7 @@ kvm="no"
 usb="yes"
 smb="yes"
 scsi="yes"
+vmware="no"
 kerneldir=""
 aix="no"
 blobs="yes"
@@ -340,6 +341,12 @@ fi
 ;;
 esac

+case $cpu in
+i386|x86_64)
+vmware="yes"
+;;
+esac
+
 if [ "$bsd" = "yes" ] ; then
   if [ "$darwin" != "yes" ] ; then
     make="gmake"
@@ -445,6 +452,8 @@ for opt do
   ;;
   --disable-scsi) scsi="no"
   ;;
+  --disable-vmware) vmware="no"
+  ;;
   --disable-kvm) kvm="no"
   ;;
   --enable-profiler) profiler="yes"
@@ -639,6 +648,7 @@ echo "  --disable-bluez          disable bluez stack 
connectivity"
 echo "  --disable-usb            disable usb stack connectivity"
 echo "  --disable-smb            disable smb directories support"
 echo "  --disable-scsi           disable scsi support"
+echo "  --disable-vmware         disable vmware devices"
 echo "  --disable-kvm            disable KVM acceleration support"
 echo "  --disable-nptl           disable usermode NPTL support"
 echo "  --enable-system          enable all system emulation targets"
@@ -1465,6 +1475,7 @@ echo "bluetooth support $bluez"
 echo "usb support       $usb"
 echo "smb directories   $smb"
 echo "scsi support      $scsi"
+echo "vwmare devices    $vmware"

 if test $sdl_too_old = "yes"; then
 echo "-> Your SDL version is too old - please upgrade to have SDL support"
@@ -1794,6 +1805,10 @@ if test "$scsi" = "yes" ; then
   echo "#define CONFIG_SCSI 1" >> $config_h
   echo "CONFIG_SCSI=yes" >> $config_mak
 fi
+if test "$vmware" = "yes" ; then
+  echo "#define CONFIG_VMWARE 1" >> $config_h
+  echo "CONFIG_VMWARE=yes" >> $config_mak
+fi
 if test "$aio" = "yes" ; then
   echo "#define CONFIG_AIO 1" >> $config_h
   echo "CONFIG_AIO=yes" >> $config_mak
diff --git a/hw/pc.c b/hw/pc.c
index ee0e07f..91d7a45 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -885,7 +885,9 @@ static void pc_init1(ram_addr_t ram_size,
         }
     }

+#ifdef CONFIG_VMWARE
     vmport_init();
+#endif

     /* allocate RAM */
     ram_addr = qemu_ram_alloc(0xa0000);
@@ -1021,11 +1023,13 @@ static void pc_init1(ram_addr_t ram_size,
         } else {
             isa_cirrus_vga_init();
         }
+#ifdef CONFIG_VMWARE
     } else if (vmsvga_enabled) {
         if (pci_enabled)
             pci_vmsvga_init(pci_bus);
         else
             fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
+#endif
     } else if (std_vga_enabled) {
         if (pci_enabled) {
             pci_vga_init(pci_bus, 0, 0);
diff --git a/hw/pckbd.c b/hw/pckbd.c
index 092d1ba..14f5f61 100644
--- a/hw/pckbd.c
+++ b/hw/pckbd.c
@@ -378,7 +378,7 @@ void i8042_init(qemu_irq kbd_irq, qemu_irq mouse_irq, 
uint32_t io_base)

     s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
     s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
-#ifdef TARGET_I386
+#if defined(TARGET_i386) && defined(CONFIG_VMWARE)
     vmmouse_init(s->mouse);
 #endif
     qemu_register_reset(kbd_reset, 0, s);
@@ -435,7 +435,7 @@ void i8042_mm_init(qemu_irq kbd_irq, qemu_irq mouse_irq,

     s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
     s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
-#ifdef TARGET_I386
+#if defined(TARGET_I386) && defined(CONFIG_VMWARE)
     vmmouse_init(s->mouse);
 #endif
     qemu_register_reset(kbd_reset, 0, s);
-- 
1.6.2.2





reply via email to

[Prev in Thread] Current Thread [Next in Thread]