[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 00/15] v3: virtio-serial-bus fixes, new abi for port
From: |
Amit Shah |
Subject: |
[Qemu-devel] [PATCH 00/15] v3: virtio-serial-bus fixes, new abi for port discovery |
Date: |
Wed, 24 Mar 2010 20:19:18 +0530 |
Hello,
These patches rework the way ports are announced to the guests. A
control message is used to let the guest know a new port is
added. Initial port discovery and port hot-plug work via this way now.
This was done to have the host and guest port numbering in sync to
avoid surprises after several hotplug/unplug operations and
migrations.
The ability to assign a particular port number to ports is also added
so that management software can control the placement of ports.
Differences from v3:
- Add iov.[ch] and move memcpy_to_iovec from virtio-balloon.c and two
fill_iov implementations from virtio-net.c and virtio-serial-bus.c
there.
- New fix for not sending data to port if host connection is not open
- Rearranged patches: migration fixes first, some trivial ones next,
followed by fixes and scatter/gather handling last.
- Plug a console port at id 0 only if an id is not supplied by user
- Let user know if a port or device failed to initialise on the guest
- Add QMP events to let mgmt know port or device addition in the guest
failed.
Overall:
- Users can set the port id they wish to instantiate ports at by using
the ,nr= parameter to 'virtserialport' and 'virtconsole' devices
- Migration fixes: refuse migration when:
- number of active ports is different between the src and destination
- max_nr_ports a device can support on the src is more
- If a qemu chardev connection to a port is closed on the dest while
it was open on the src, inform the guest about this. (Also do the
same for port closed on src but open on dest.)
- Use control messages for relaying new port information instead of
config space (changes abi)
- Propagate error message from guest in instantiating a port or a
device to the user as well as mgmt via QMP messages.
- Handle scatter/gather for control output and data output from the
guest
Amit Shah (15):
virtio-serial: save/load: Ensure target has enough ports
virtio-serial: save/load: Ensure nr_ports on src and dest are same.
virtio-serial: save/load: Ensure we have hot-plugged ports
instantiated
virtio-serial: save/load: Send target host connection status if
different
virtio-serial: Use control messages to notify guest of new ports
virtio-serial: whitespace: match surrounding code
virtio-serial: Remove redundant check for 0-sized write request
virtio-serial: Update copyright year to 2010
virtio-serial: Propagate errors in initialising ports / devices in
guest
virtio-serial: Add QMP events for failed port/device add
virtio-serial: Send out guest data to ports only if port is opened
iov: Introduce a new file for helpers around iovs, add iov_from_buf()
iov: Add iov_to_buf and iov_size helpers
virtio-serial: Handle scatter-gather buffers for control messages
virtio-serial: Handle scatter/gather input from the guest
Makefile.objs | 1 +
QMP/qmp-events.txt | 48 +++++++++
hw/iov.c | 70 ++++++++++++
hw/iov.h | 19 ++++
hw/virtio-balloon.c | 35 +------
hw/virtio-console.c | 4 +-
hw/virtio-net.c | 20 +---
hw/virtio-serial-bus.c | 277 +++++++++++++++++++++++++++++++++++++-----------
hw/virtio-serial.h | 19 ++--
monitor.c | 3 +
monitor.h | 1 +
11 files changed, 380 insertions(+), 117 deletions(-)
create mode 100644 hw/iov.c
create mode 100644 hw/iov.h
- [Qemu-devel] [PATCH 00/15] v3: virtio-serial-bus fixes, new abi for port discovery,
Amit Shah <=
- [Qemu-devel] [PATCH 01/15] virtio-serial: save/load: Ensure target has enough ports, Amit Shah, 2010/03/24
- [Qemu-devel] [PATCH 02/15] virtio-serial: save/load: Ensure nr_ports on src and dest are same., Amit Shah, 2010/03/24
- [Qemu-devel] [PATCH 03/15] virtio-serial: save/load: Ensure we have hot-plugged ports instantiated, Amit Shah, 2010/03/24
- [Qemu-devel] [PATCH 04/15] virtio-serial: save/load: Send target host connection status if different, Amit Shah, 2010/03/24
- [Qemu-devel] [PATCH 05/15] virtio-serial: Use control messages to notify guest of new ports, Amit Shah, 2010/03/24
- [Qemu-devel] [PATCH 06/15] virtio-serial: whitespace: match surrounding code, Amit Shah, 2010/03/24
- [Qemu-devel] [PATCH 07/15] virtio-serial: Remove redundant check for 0-sized write request, Amit Shah, 2010/03/24
- [Qemu-devel] [PATCH 08/15] virtio-serial: Update copyright year to 2010, Amit Shah, 2010/03/24
- [Qemu-devel] [PATCH 09/15] virtio-serial: Propagate errors in initialising ports / devices in guest, Amit Shah, 2010/03/24
- [Qemu-devel] [PATCH 10/15] virtio-serial: Add QMP events for failed port/device add, Amit Shah, 2010/03/24