[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 0/5] usb-ccid (v14)
From: |
Alon Levy |
Subject: |
[Qemu-devel] [PATCH 0/5] usb-ccid (v14) |
Date: |
Sat, 8 Jan 2011 12:28:48 +0200 |
This patchset adds three new devices, usb-ccid, ccid-card-passthru and
ccid-card-emulated, providing a CCID bus, a simple passthru protocol
implementing card requiring a client, and a standalone emulated card.
It also introduces a new directory libcaccard with CAC card emulation,
CAC is a type of ISO 7816 smart card.
Tree for pull: git://anongit.freedesktop.org/~alon/qemu usb_ccid.v14
v13-v14 changes:
- support device_del/device_add on ccid-card-* and usb-ccid
* usb-ccid:
* lose card reference when card device deleted
* check slot number and deny adding a slot if one is already added.
* ccid-card-*: use qdev_simple_unplug_cb in both emulated and passthru ccid
cards,
the exitfn already takes care of triggering card removal in the usb dev.
* libcacard:
* remove double include of config-host.mak
* add replay of card events to libcacard to support second and more emulation
* don't initialize more then once (doesn't support it right now, so one
thread, NSS thread, is left when device_del is done)
* add VCARD_EMUL_INIT_ALREADY_INITED
* ccid-card-emulated:
* take correct mutexes on signaling to fix deadlocks on device_del
* allow card insertion/removal event without proper reader insertion event
v12-v13 changes:
* libcacard:
* fix Makefile clean to remove vscclient
* fix double include of config-host in Makefile
* usb-ccid: remove attach/detach logic, usb is always attached. Guest
doesn't care if there is a reader attached with no card anyway.
* ccid-card-passthru: don't close chr_dev on removal, makes it possible
to use device_del/device_add to create remove/insertion for debugging.
v11-v12 changes:
* fix out of tree build
v10-v11 changes:
* fix last patch that removed one of the doc files.
* updated flow table in docs/ccid.txt
v8-v10 changes:
* usb-ccid:
* add slot for future use (Gerd)
* ifdef ENABLE_MIGRATION for migration support on account of usb
migration not being ready in general. (Gerd)
* verbosified commit messages. (Gerd)
* put libcacard docs in libcacard commit. (Gerd)
v8-v9 changes:
* Blue Swirl comments:
* white space fixes
* enabled by default, disabled only if missing nss
* forgotten fix from v8 (don't build libcacard.so)
* added a note about device being little endian
* library renamed from libcaccard to libcacard
* squashed both of libcacard patches, they touched different files anyway.
v7-v8 changes:
* Blue Swirl comments:
* usb-ccid: deannonymize some structs
* usb-ccid: coding style change - answer_t and bulk_in_t fixed
* usb-ccid: handle endianess conversion between guest and host
* usb-ccid: s/ccid_bulk_in_copy_out/ccid_bulk_in_copy_to_guest/
* ccid-card-emulated: fix segfault if backend not specified
* ccid-card-emulated: let last reader inserted win
* libcaccard: remove double vscard_common.h
v6->v7 changes:
* external libcaccard became internal directory libcaccard
* statically link object files into qemu
* produce libcaccard.so for usage by external projects
* applied coding style to new code (please check me)
- did not use the qemu options parsing for libcaccard, since
it seems to draw large amounts of qemu code (monitor for instance).
v5->v6 changes:
* really remove static debug (I apologize for claiming to have done so before)
v4->v5 changes:
* rebased to latest
* remove static debug in card devices
* fix --enable-smartcard to link
* stall instead of assert when exceeding BULK_OUT_DATA_SIZE
* make ccid_reserve_recv_buf for too large len discard message, not exit
* make ccid_reserve_recv_buf return void*
* fix typo
* remove commented code in VMState
v3->v4:
* remove ccid field in CCIDBus
* remove static debug in bus
* add back docs
v2->v3:
* split into bus (usb-ccid.c, uses ccid.h) and card (ccid-card-passthru.c).
* removed documentation (being revised).
v1->v2:
* all QSIMPLEQ turned into fixed sized rings
* all allocated buffers turned into fixed size buffers
* added migration support
* added a message to tell client qemu has migrated to ip:port
* for lack of monitor commands ip:port are 0:0, which causes the updated
vscclient to connect to one port higher on the same host. will add monitor
commands in a separate patch. tested with current setup.
Alon Levy (4):
usb-ccid: add CCID bus
ccid: add passthru card device
ccid: add ccid-card-emulated device (v2)
ccid: add docs
Robert Relyea (1):
libcacard: initial commit after coding style fixes
Makefile | 6 +-
Makefile.objs | 6 +
Makefile.target | 2 +
configure | 31 +
docs/ccid.txt | 135 +++++
docs/libcacard.txt | 483 +++++++++++++++
hw/ccid-card-emulated.c | 534 +++++++++++++++++
hw/ccid-card-passthru.c | 272 +++++++++
hw/ccid.h | 35 ++
hw/usb-ccid.c | 1355 +++++++++++++++++++++++++++++++++++++++++++
libcacard/Makefile | 14 +
libcacard/cac.c | 411 +++++++++++++
libcacard/cac.h | 20 +
libcacard/card_7816.c | 780 +++++++++++++++++++++++++
libcacard/card_7816.h | 60 ++
libcacard/card_7816t.h | 163 ++++++
libcacard/config.h | 81 +++
libcacard/event.c | 112 ++++
libcacard/eventt.h | 28 +
libcacard/link_test.c | 20 +
libcacard/mutex.h | 59 ++
libcacard/passthru.c | 612 +++++++++++++++++++
libcacard/passthru.h | 50 ++
libcacard/vcard.c | 350 +++++++++++
libcacard/vcard.h | 85 +++
libcacard/vcard_emul.h | 62 ++
libcacard/vcard_emul_nss.c | 1171 +++++++++++++++++++++++++++++++++++++
libcacard/vcard_emul_type.c | 60 ++
libcacard/vcard_emul_type.h | 29 +
libcacard/vcardt.h | 66 +++
libcacard/vevent.h | 26 +
libcacard/vreader.c | 526 +++++++++++++++++
libcacard/vreader.h | 54 ++
libcacard/vreadert.h | 23 +
libcacard/vscard_common.h | 130 +++++
libcacard/vscclient.c | 710 ++++++++++++++++++++++
36 files changed, 8559 insertions(+), 2 deletions(-)
create mode 100644 docs/ccid.txt
create mode 100644 docs/libcacard.txt
create mode 100644 hw/ccid-card-emulated.c
create mode 100644 hw/ccid-card-passthru.c
create mode 100644 hw/ccid.h
create mode 100644 hw/usb-ccid.c
create mode 100644 libcacard/Makefile
create mode 100644 libcacard/cac.c
create mode 100644 libcacard/cac.h
create mode 100644 libcacard/card_7816.c
create mode 100644 libcacard/card_7816.h
create mode 100644 libcacard/card_7816t.h
create mode 100644 libcacard/config.h
create mode 100644 libcacard/event.c
create mode 100644 libcacard/eventt.h
create mode 100644 libcacard/link_test.c
create mode 100644 libcacard/mutex.h
create mode 100644 libcacard/passthru.c
create mode 100644 libcacard/passthru.h
create mode 100644 libcacard/vcard.c
create mode 100644 libcacard/vcard.h
create mode 100644 libcacard/vcard_emul.h
create mode 100644 libcacard/vcard_emul_nss.c
create mode 100644 libcacard/vcard_emul_type.c
create mode 100644 libcacard/vcard_emul_type.h
create mode 100644 libcacard/vcardt.h
create mode 100644 libcacard/vevent.h
create mode 100644 libcacard/vreader.c
create mode 100644 libcacard/vreader.h
create mode 100644 libcacard/vreadert.h
create mode 100644 libcacard/vscard_common.h
create mode 100644 libcacard/vscclient.c
--
1.7.3.4
- [Qemu-devel] [PATCH 0/5] usb-ccid (v14),
Alon Levy <=
- [Qemu-devel] [PATCH 1/5] usb-ccid: add CCID bus, Alon Levy, 2011/01/08
- [Qemu-devel] [PATCH 2/5] ccid: add passthru card device, Alon Levy, 2011/01/08
- [Qemu-devel] [PATCH 5/5] ccid: add docs, Alon Levy, 2011/01/08
- [Qemu-devel] [PATCH 4/5] ccid: add ccid-card-emulated device (v2), Alon Levy, 2011/01/08
- [Qemu-devel] [PATCH 3/5] libcacard: initial commit after coding style fixes, Alon Levy, 2011/01/08
- Re: [Qemu-devel] [PATCH 0/5] usb-ccid (v14), Gerd Hoffmann, 2011/01/10