Re: [Qemu-devel] [PATCH 2/2 V1] Fixed EPROM for AMD driver compatibility under DOS with Netware driver

[Gerhard Wiesinger]

Hello,

No comments? Can someone commit?

Thnx.

Ciao,
Gerhard

--
http://www.wiesinger.com/


On Sun, 20 Feb 2011, Gerhard Wiesinger wrote:

> Signed-off-by: Gerhard Wiesinger <address@hidden>
> ---
> hw/pcnet.c |   12 ++++++++++--
> 1 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/hw/pcnet.c b/hw/pcnet.c
> index db52dc5..a6d5784 100644
> --- a/hw/pcnet.c
> +++ b/hw/pcnet.c
> @@ -1562,9 +1562,17 @@ void pcnet_h_reset(void *opaque)
>
>     /* Initialize the PROM */
>
> +    // Datasheet: http://pdfdata.datasheetsite.com/web/24528/AM79C970A.pdf
> +    // page 95
> +    // bugfix under DOS with AMD netware driver: AMD PCNTNW Ethernet MLID 
> v3.10 (960115), network card not found
> +    // works well under DOS with AMD NDIS driver v2.0.1, Knoppix 6.2 ok
>     memcpy(s->prom, s->conf.macaddr.a, 6);
> -    s->prom[12] = s->prom[13] = 0x00;
> -    s->prom[14] = s->prom[15] = 0x57;
> +    s->prom[6] = s->prom[7] = 0x00; // Reserved Location: must be 00h
> +    s->prom[8] = 0x00; // Reserved Location: must be 00h
> +    s->prom[9] = 0x11; // Hardware ID: must be 11h if compatibility to AMD 
> drivers is desired
> +    s->prom[10] = s->prom[11] = 0x00; // User programmable space
> +    s->prom[12] = s->prom[13] = 0x00; // LSByte of two-byte checksum, which 
> is the sum of bytes 00hâ??0Bh and bytes 0Eh and 0Fh, must therefore be 
> initialized with 0!
> +    s->prom[14] = s->prom[15] = 0x57; // Must be ASCII W (57h) if 
> compatibility to AMD driver software is desired
>
>     for (i = 0,checksum = 0; i < 16; i++)
>         checksum += s->prom[i];
> --
> 1.7.3.4
>
> Signed-off-by: Gerhard Wiesinger <address@hidden>
> ---
> hw/pcnet.c |    2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/hw/pcnet.c b/hw/pcnet.c
> index a6d5784..2acd5f9 100644
> --- a/hw/pcnet.c
> +++ b/hw/pcnet.c
> @@ -1571,7 +1571,7 @@ void pcnet_h_reset(void *opaque)
>     s->prom[8] = 0x00; // Reserved Location: must be 00h
>     s->prom[9] = 0x11; // Hardware ID: must be 11h if compatibility to AMD 
> drivers is desired
>     s->prom[10] = s->prom[11] = 0x00; // User programmable space
> -    s->prom[12] = s->prom[13] = 0x00; // LSByte of two-byte checksum, which 
> is the sum of bytes 00hâ??0Bh and bytes 0Eh and 0Fh, must therefore be 
> initialized with 0!
> +    s->prom[12] = s->prom[13] = 0x00; // LSByte of two-byte checksum, which 
> is the sum of bytes 00h-0Bh and bytes 0Eh and 0Fh, must therefore be 
> initialized with 0!
>     s->prom[14] = s->prom[15] = 0x57; // Must be ASCII W (57h) if 
> compatibility to AMD driver software is desired
>
>     for (i = 0,checksum = 0; i < 16; i++)
> --
> 1.7.3.4