[Qemu-devel] [PATCH] tusb6010: Convert to qdev

[Peter Maydell]

Convert the tusb6010 to qdev.

Signed-off-by: Juha Riihimäki <address@hidden>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <address@hidden>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <address@hidden>
---
The point of this patch (apart from qdevification being a general good
thing) is that once all the usb-musb users are qdev devices there is
some cleanup that can be done there. I have some patches for the usb-musb
code which depend on this and which I'll submit when this goes in.
(In particular, the slightly ugly allocation of an irq array in the
tusb6010 init function can go away once usb-musb is qdev-aware.)

I have to admit that I wasn't able to find any n8x0 images which actively
used the USB, but I have tested that this doesn't cause problems on init,
at least.

 hw/nseries.c  |   31 ++++++---------
 hw/tusb6010.c |  115 ++++++++++++++++++++++++++++++++++++++++-----------------
 hw/tusb6010.h |   28 --------------
 3 files changed, 94 insertions(+), 80 deletions(-)
 delete mode 100644 hw/tusb6010.h

diff --git a/hw/nseries.c b/hw/nseries.c
index f7ace99..af287dd 100644
--- a/hw/nseries.c
+++ b/hw/nseries.c
@@ -32,7 +32,6 @@
 #include "bt.h"
 #include "loader.h"
 #include "blockdev.h"
-#include "tusb6010.h"
 #include "sysbus.h"
 
 /* Nokia N8x0 support */
@@ -50,7 +49,7 @@ struct n800_s {
     int keymap[0x80];
     DeviceState *kbd;
 
-    TUSBState *usb;
+    DeviceState *usb;
     void *retu;
     void *tahvo;
     DeviceState *nand;
@@ -765,25 +764,21 @@ static void n8x0_uart_setup(struct n800_s *s)
     omap_uart_attach(s->cpu->uart[BT_UART], radio);
 }
 
-static void n8x0_usb_power_cb(void *opaque, int line, int level)
-{
-    struct n800_s *s = opaque;
-
-    tusb6010_power(s->usb, level);
-}
-
 static void n8x0_usb_setup(struct n800_s *s)
 {
-    qemu_irq tusb_irq = qdev_get_gpio_in(s->cpu->gpio, N8X0_TUSB_INT_GPIO);
-    qemu_irq tusb_pwr = qemu_allocate_irqs(n8x0_usb_power_cb, s, 1)[0];
-    TUSBState *tusb = tusb6010_init(tusb_irq);
-
+    SysBusDevice *dev;
+    s->usb = qdev_create(NULL, "tusb6010");
+    dev = sysbus_from_qdev(s->usb);
+    qdev_init_nofail(s->usb);
+    sysbus_connect_irq(dev, 0,
+                       qdev_get_gpio_in(s->cpu->gpio, N8X0_TUSB_INT_GPIO));
     /* Using the NOR interface */
-    omap_gpmc_attach(s->cpu->gpmc, N8X0_USB_ASYNC_CS, tusb6010_async_io(tusb));
-    omap_gpmc_attach(s->cpu->gpmc, N8X0_USB_SYNC_CS, tusb6010_sync_io(tusb));
-
-    s->usb = tusb;
-    qdev_connect_gpio_out(s->cpu->gpio, N8X0_TUSB_ENABLE_GPIO, tusb_pwr);
+    omap_gpmc_attach(s->cpu->gpmc, N8X0_USB_ASYNC_CS,
+                     sysbus_mmio_get_region(dev, 0));
+    omap_gpmc_attach(s->cpu->gpmc, N8X0_USB_SYNC_CS,
+                     sysbus_mmio_get_region(dev, 1));
+    qdev_connect_gpio_out(s->cpu->gpio, N8X0_TUSB_ENABLE_GPIO,
+                          qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */
 }
 
 /* Setup done before the main bootloader starts by some early setup code
diff --git a/hw/tusb6010.c b/hw/tusb6010.c
index b2bf359..de6ffc6 100644
--- a/hw/tusb6010.c
+++ b/hw/tusb6010.c
@@ -23,9 +23,11 @@
 #include "usb.h"
 #include "omap.h"
 #include "irq.h"
-#include "tusb6010.h"
+#include "devices.h"
+#include "sysbus.h"
 
-struct TUSBState {
+typedef struct TUSBState {
+    SysBusDevice busdev;
     MemoryRegion iomem[2];
     qemu_irq irq;
     MUSBState *musb;
@@ -59,7 +61,7 @@ struct TUSBState {
     uint32_t pullup[2];
     uint32_t control_config;
     uint32_t otg_timer_val;
-};
+} TUSBState;
 
 #define TUSB_DEVCLOCK                  60000000        /* 60 MHz */
 
@@ -234,16 +236,6 @@ struct TUSBState {
 #define TUSB_EP_CONFIG_XFR_SIZE(v)     ((v) & 0x7fffffff)
 #define TUSB_PROD_TEST_RESET_VAL       0xa596
 
-MemoryRegion *tusb6010_sync_io(TUSBState *s)
-{
-    return &s->iomem[0];
-}
-
-MemoryRegion *tusb6010_async_io(TUSBState *s)
-{
-    return &s->iomem[1];
-}
-
 static void tusb_intr_update(TUSBState *s)
 {
     if (s->control_config & TUSB_INT_CTRL_CONF_INT_POLARITY)
@@ -723,9 +715,33 @@ static void tusb_musb_core_intr(void *opaque, int source, 
int level)
     }
 }
 
-TUSBState *tusb6010_init(qemu_irq intr)
+static void tusb6010_power(TUSBState *s, int on)
 {
-    TUSBState *s = g_malloc0(sizeof(*s));
+    if (!on) {
+        s->power = 0;
+    } else if (!s->power && on) {
+        s->power = 1;
+        /* Pull the interrupt down after TUSB6010 comes up.  */
+        s->intr_ok = 0;
+        tusb_intr_update(s);
+        qemu_mod_timer(s->pwr_timer,
+                       qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 2);
+    }
+}
+
+static void tusb6010_irq(void *opaque, int source, int level)
+{
+    if (source) {
+        tusb_musb_core_intr(opaque, source - 1, level);
+    } else {
+        tusb6010_power(opaque, level);
+    }
+}
+
+static void tusb6010_reset(DeviceState *dev)
+{
+    TUSBState *s = FROM_SYSBUS(TUSBState, sysbus_from_qdev(dev));
+    int i;
 
     s->test_reset = TUSB_PROD_TEST_RESET_VAL;
     s->host_mode = 0;
@@ -735,28 +751,59 @@ TUSBState *tusb6010_init(qemu_irq intr)
     s->mask = 0xffffffff;
     s->intr = 0x00000000;
     s->otg_timer_val = 0;
-    memory_region_init_io(&s->iomem[1], &tusb_async_ops, s, "tusb-async",
-                          UINT32_MAX);
-    s->irq = intr;
+    s->scratch = 0;
+    s->prcm_config = 0;
+    s->prcm_mngmt = 0;
+    s->intr_ok = 0;
+    s->usbip_intr = 0;
+    s->usbip_mask = 0;
+    s->gpio_intr = 0;
+    s->gpio_mask = 0;
+    s->gpio_config = 0;
+    s->dma_intr = 0;
+    s->dma_mask = 0;
+    s->dma_map = 0;
+    s->dma_config = 0;
+    s->ep0_config = 0;
+    s->wkup_mask = 0;
+    s->pullup[0] = s->pullup[1] = 0;
+    s->control_config = 0;
+    for (i = 0; i < 15; i++) {
+        s->rx_config[i] = s->tx_config[i] = 0;
+    }
+}
+
+static int tusb6010_init(SysBusDevice *dev)
+{
+    TUSBState *s = FROM_SYSBUS(TUSBState, dev);
+    qemu_irq *musb_irqs;
+    int i;
     s->otg_timer = qemu_new_timer_ns(vm_clock, tusb_otg_tick, s);
     s->pwr_timer = qemu_new_timer_ns(vm_clock, tusb_power_tick, s);
-    s->musb = musb_init(qemu_allocate_irqs(tusb_musb_core_intr, s,
-                            __musb_irq_max));
-
-    return s;
+    memory_region_init_io(&s->iomem[1], &tusb_async_ops, s, "tusb-async",
+                          UINT32_MAX);
+    sysbus_init_mmio_region(dev, &s->iomem[0]);
+    sysbus_init_mmio_region(dev, &s->iomem[1]);
+    sysbus_init_irq(dev, &s->irq);
+    qdev_init_gpio_in(&dev->qdev, tusb6010_irq, __musb_irq_max + 1);
+    musb_irqs = g_new0(qemu_irq, __musb_irq_max);
+    for (i = 0; i < __musb_irq_max; i++) {
+        musb_irqs[i] = qdev_get_gpio_in(&dev->qdev, i + 1);
+    }
+    s->musb = musb_init(musb_irqs);
+    return 0;
 }
 
-void tusb6010_power(TUSBState *s, int on)
-{
-    if (!on)
-        s->power = 0;
-    else if (!s->power && on) {
-        s->power = 1;
+static SysBusDeviceInfo tusb6010_info = {
+    .init = tusb6010_init,
+    .qdev.name = "tusb6010",
+    .qdev.size = sizeof(TUSBState),
+    .qdev.reset = tusb6010_reset,
+};
 
-        /* Pull the interrupt down after TUSB6010 comes up.  */
-        s->intr_ok = 0;
-        tusb_intr_update(s);
-        qemu_mod_timer(s->pwr_timer,
-                       qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 2);
-    }
+static void tusb6010_register_device(void)
+{
+    sysbus_register_withprop(&tusb6010_info);
 }
+
+device_init(tusb6010_register_device)
diff --git a/hw/tusb6010.h b/hw/tusb6010.h
deleted file mode 100644
index b85ee86..0000000
--- a/hw/tusb6010.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * tusb6010 interfaces
- *
- * Copyright 2011 Red Hat, Inc. and/or its affiliates
- *
- * Authors:
- *  Avi Kivity <address@hidden>
- *
- * Derived from hw/devices.h.
- *
- * This work is licensed under the terms of the GNU GPL, version 2.  See
- * the COPYING file in the top-level directory.
- *
- */
-
-#ifndef TUSB6010_H
-#define TUSB6010_H
-
-#include "targphys.h"
-#include "memory.h"
-
-typedef struct TUSBState TUSBState;
-TUSBState *tusb6010_init(qemu_irq intr);
-MemoryRegion *tusb6010_sync_io(TUSBState *s);
-MemoryRegion *tusb6010_async_io(TUSBState *s);
-void tusb6010_power(TUSBState *s, int on);
-
-#endif
-- 
1.7.1