Re: [Qemu-devel] windows XP fail to enter standby mode

[hkran]

On 09/15/2011 06:42 PM, Alon Levy wrote:
> On Thu, Sep 15, 2011 at 05:23:01PM +0800, hkran wrote:
> > Hi,
> >
> > If I select to let my guest XP enter standby mode by clicking the button
> > manually. qemu will exit with the following message left:
> >
> > ioport_write: PANIC d->guest_slots[val].active failed
> >
> > the following is my command to start qemu:
> >
> > /home/huikai/qemu15/bin/qemu --enable-kvm  -m 768  -drive
> > file=/home/huikai/winxp_dev.img,if=virtio  -net nic,model=virtio -net
> > user -usb -usbdevice tablet -vga qxl  -localtime  -device virtio-serial
> > -chardev spicevmc,name=vdagent,id=vdagent -device
> > virtserialport,chardev=vdagent,name=spice0 -spice
> > port=1234,disable-ticketing -monitor telnet:localhost:12341,server,nowait
> >
> > Qemu is 0.15v
> > gxl driver 
> > isqxl-0.10-20112808.zip<http://spice-space.org/download/binaries/qxl-0.10-20112808.zip>
> >    from http://spice-space.org/download.html
> What bios are you using? Is there a reset event? can you paste the complete log 
> before the PANIC?
>
> Thanks,
> Alon
BIOS:
(qemu) info roms
addr=00000000fffe0000 size=0x020000 mem=rom name="bios.bin"
> the entire log:
address@hidden ~]# /home/huikai/qemu15/bin/qemu  --enable-kvm  -m 
768  -drive file=/home/huikai/winxp_dev.img,if=virtio  -net 
nic,model=virtio -net user -usb -usbdevice tablet  -localtime -vga qxl 
-device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent -device 
virtserialport,chardev=vdagent,name=spice0 -spice 
port=1234,disable-ticketing   -monitor 
telnet:localhost:12341,server,nowait -cdrom 
/home/huikai/iso/GRMWDK_EN_7600_1.ISO
do_spice_init: starting 0.8.0
spice_server_add_interface: SPICE_INTERFACE_KEYBOARD
spice_server_add_interface: SPICE_INTERFACE_MOUSE
spice_server_add_interface: SPICE_INTERFACE_QXL
red_worker_main: begin
handle_dev_destroy_surfaces:
handle_dev_destroy_surfaces:
handle_dev_input: start
spice_server_add_interface: SPICE_INTERFACE_TABLET
handle_dev_destroy_surfaces:
reds_handle_main_link:
reds_show_new_channel: channel 1:0, connected successfully, over Non 
Secure link
handle_dev_input: mouse mode 2
reds_main_handle_message: net test: latency 1.043000 ms, bitrate 
341333333333 bps (325520.833333 Mbps)
reds_show_new_channel: channel 4:0, connected successfully, over Non 
Secure link
red_dispatcher_set_cursor_peer:
handle_dev_input: cursor connect
reds_show_new_channel: channel 2:0, connected successfully, over Non 
Secure link
red_dispatcher_set_peer:
handle_dev_input: connect
handle_new_display_channel: jpeg disabled
handle_new_display_channel: zlib-over-glz disabled
reds_show_new_channel: channel 3:0, connected successfully, over Non 
Secure link
inputs_link:
handle_dev_destroy_surfaces:
handle_dev_destroy_surfaces:
ioport_write: PANIC d->guest_slots[val].active failed

As for reset event, Alon, Do you know how to tell a reset event posted 
in qemu?
In addition, if I use the default -vga std, qemu will not exit when VM 
entering standby.It seems that there is something wrong about qxl driver.

> > _______________________________________________________
> > kvm-cstl mailing list&lt;address@hidden>
> > To unsubscribe from the list, change your list options
> > or if you have forgotten your list password visit:
> > http://lists.linux.ibm.com/mailman/listinfo/kvm-cstl