[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v12 0/5] The intro to QEMU block I/O throttling
From: |
Zhi Yong Wu |
Subject: |
[Qemu-devel] [PATCH v12 0/5] The intro to QEMU block I/O throttling |
Date: |
Thu, 3 Nov 2011 16:57:24 +0800 |
The main goal of the patch is to effectively cap the disk I/O speed or counts
of one single VM.It is only one draft, so it unavoidably has some drawbacks, if
you catch them, please let me know.
The patch will mainly introduce one block I/O throttling algorithm, one timer
and one block queue for each I/O limits enabled drive.
When a block request is coming in, the throttling algorithm will check if its
I/O rate or counts exceed the limits; if yes, then it will enqueue to the block
queue; The timer will handle the I/O requests in it.
Some available features follow as below:
(1) global bps limit.
-drive bps=xxx in bytes/s
(2) only read bps limit
-drive bps_rd=xxx in bytes/s
(3) only write bps limit
-drive bps_wr=xxx in bytes/s
(4) global iops limit
-drive iops=xxx in ios/s
(5) only read iops limit
-drive iops_rd=xxx in ios/s
(6) only write iops limit
-drive iops_wr=xxx in ios/s
(7) the combination of some limits.
-drive bps=xxx,iops=xxx
Known Limitations:
(1) #1 can not coexist with #2, #3
(2) #4 can not coexist with #5, #6
Changes since code V11:
Made some changes based on kevin's comments.
v11: Made some mininal changes based on stefan and Ryan's comments
Add one perf report for block I/O throttling
v10: Greately simply the logic and rebase request queue to CoQueue based on
Stefan's comments.
v9: made a lot of changes based on kevin's comments.
slice_time is dynamically adjusted based on wait_time.
rebase the latest qemu upstream.
v8: fix the build per patch based on stefan's comments.
v7: Mainly simply the block queue.
Adjust codes based on stefan's comments.
v6: Mainly fix the aio callback issue for block queue.
Adjust codes based on Ram Pai's comments.
v5: add qmp/hmp support.
Adjust the codes based on stefan's comments
qmp/hmp: add block_set_io_throttle
v4: fix memory leaking based on ryan's feedback.
v3: Added the code for extending slice time, and modified the method to
compute wait time for the timer.
v2: The codes V2 for QEMU disk I/O limits.
Modified the codes mainly based on stefan's comments.
v1: Submit the codes for QEMU disk I/O limits.
Zhi Yong Wu (5):
block: add the blockio limits command line support
CoQueue: introduce qemu_co_queue_wait_insert_head
block: add I/O throttling algorithm
hmp/qmp: add block_set_io_throttle
block: perf testing report based on block I/O throttling
10mbps.dat | 310 ++++++++++++++++++++++++++++++++++++++++++++
1mbps.dat | 339 +++++++++++++++++++++++++++++++++++++++++++++++++
block.c | 274 +++++++++++++++++++++++++++++++++++++++
block.h | 5 +
block_int.h | 30 +++++
blockdev.c | 103 +++++++++++++++
blockdev.h | 2 +
hmp-commands.hx | 15 ++
hmp.c | 10 ++
qapi-schema.json | 16 ++-
qemu-config.c | 24 ++++
qemu-coroutine-lock.c | 8 +
qemu-coroutine.h | 6 +
qemu-options.hx | 1 +
qerror.c | 4 +
qerror.h | 3 +
qmp-commands.hx | 53 ++++++++-
17 files changed, 1201 insertions(+), 2 deletions(-)
create mode 100644 10mbps.dat
create mode 100644 1mbps.dat
--
1.7.6
- [Qemu-devel] [PATCH v12 0/5] The intro to QEMU block I/O throttling,
Zhi Yong Wu <=
[Qemu-devel] [PATCH v12 4/5] hmp/qmp: add block_set_io_throttle, Zhi Yong Wu, 2011/11/03