[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 902148] Re: qemu-img V1.0 hangs on creating Image (0.1
From: |
Michael Niehren |
Subject: |
[Qemu-devel] [Bug 902148] Re: qemu-img V1.0 hangs on creating Image (0.15.1 runs) |
Date: |
Mon, 19 Dec 2011 10:52:24 -0000 |
Ok, sorry, here the output:
Thread 1 (Thread 0x7f57507c2740 (LWP 27263)):
#0 0x00007f57507da952 in qemu_aio_wait ()
#1 0x00007f57507dcf2d in bdrv_rw_co ()
#2 0x00007f57507dd2c2 in bdrv_pread ()
#3 0x00007f57507ed03a in qcow2_open ()
#4 0x00007f57507dc281 in bdrv_open_common ()
#5 0x00007f57507ddb73 in bdrv_open ()
#6 0x00007f57507ecafa in qcow2_create2 ()
#7 0x00007f57507ece58 in qcow2_create ()
#8 0x00007f57507e12c1 in bdrv_img_create ()
#9 0x00007f575080bfeb in img_create ()
#10 0x00007f574f340c7d in __libc_start_main () from /lib64/libc.so.6
#11 0x00007f57507d9359 in _start ()
I compiled the rpm's myself, so i am sure the only difference of both is the
enable-debug Flag, same
source code. Here are my compile-flags on running configure:
--disable-curses --disable-curl --audio-card-list=ac97 \
--enable-kvm --enable-spice --enable-linux-aio \
--enable-tcg-interpreter --enable-vnc-thread
Michael
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/902148
Title:
qemu-img V1.0 hangs on creating Image (0.15.1 runs)
Status in QEMU:
New
Bug description:
Hi,
i try the following command:
/usr/bin/qemu-img create -f qcow2 test.img 10G
if i run it on V0.15.1 it works, on V1.0 it hangs. Starting qemu-kvm
hangs too, i think it's the same Bug.
Strace on the hanging qemu-img ends on:
select(5, [4], [], NULL, NULL) = 1 (in [4])
read(4, "\0", 16) = 1
close(3) = 0
open("test.img", O_RDONLY|O_NONBLOCK) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=131072, ...}) = 0
close(3) = 0
open("test.img", O_RDONLY|O_NONBLOCK) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=131072, ...}) = 0
close(3) = 0
stat("test.img", {st_mode=S_IFREG|0644, st_size=131072, ...}) = 0
open("test.img", O_RDWR|O_CLOEXEC) = 3
lseek(3, 0, SEEK_END) = 131072
next line in the strace on working qemu-img V0.15.1 is:
pread(3,
"QFI\373\0\0\0\2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\0\0\0\0\0\0\0"..., 512, 0)
= 512
...
The only linking difference i see is the libgthread on the new version
V1.0. I am using glib V2.26.
Can someone help ?
best regards,
Michael
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/902148/+subscriptions
- [Qemu-devel] [PATCH v2 0/9] various ARM fixes, Mark Langsdorf, 2011/12/22
- [Qemu-devel] [PATCH v2 4/9] arm: add dummy gic security registers, Mark Langsdorf, 2011/12/22
- [Qemu-devel] [PATCH v2 2/9] arm: Set frequencies for arm_timer, Mark Langsdorf, 2011/12/22
- [Qemu-devel] [PATCH 5/9] ahci: convert ahci_reset to use AHCIState, Mark Langsdorf, 2011/12/22
- [Qemu-devel] [PATCH v2 1/9] arm: add missing scu registers, Mark Langsdorf, 2011/12/22
- [Qemu-devel] [PATCH 9/9] arm: increase a9mp interrupts to 160, Mark Langsdorf, 2011/12/22
- [Qemu-devel] [PATCH v2 3/9] arm: add dummy v7 cp15 config_base_register, Mark Langsdorf, 2011/12/22
- [Qemu-devel] [PATCH v2 8/9] Add xgmac ethernet model, Mark Langsdorf, 2011/12/22
- [Qemu-devel] [PATCH 6/9] ahci: add support for non-PCI based controllers, Mark Langsdorf, 2011/12/22
- [Qemu-devel] [PATCH v2 7/9] add L2x0/PL310 cache controller device, Mark Langsdorf, 2011/12/22