Re: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15

[Vadim Rozenfeld]

On Monday, March 19, 2012 02:48:43 PM Paul Lu-???-????? wrote:
> Hi Vadim,
> Here is the configuration:
> /usr/local/bin/qemu-system-x86_64 \
>  -localtime \
>  -boot order=c,menu=on \
>  -drive file=/var/lib/libvirt/images/xxx.img \
>  -vga qxl \
>  -cdrom /home/paul/Downloads/ISO/virtio-win-0.1-15.iso \
>  -chardev spicevmc,id=vdagent,name=vdagent \
>  -spice port=5930,disable-ticketing \
>  -device virtio-serial-pci \
>  -device virtserialport,chardev=vdagent,name=com.redhat.spice.0 \
>  -smp 1,cores=1 -m 2048 \
>  -enable-kvm \
>  -usbdevice tablet \
>  -net nic -net user \
>  -tb-size 0 \
>  -qmp tcp:localhost:4444,nowait,server \
>  -D /home/paul/MyQemuLog/xxx/xxx.log \
>  -trace events=/home/paul/MyTestCase/xxx/events
> 
> QEMU Version: qemu-kvm commit 30c044521889195f54a9f2c21310894f545994e8
> 
> 
> I use qmp command, query-pci, to check virtio-serial-pci BAR0. It shows
> 0xC140. However, pci_default_read_config in pci.c return 0xC141 to Guest.
> We also trace pci_default_wirte_config.
> 
> At some point, the BAR0 will be overwritten to 0xC141. Here is the result,
> 
> virtio_set_status vdev 0x7fbeaba594a0 val 0
> virtio_set_status vdev 0x7fbeaba594a0 val 0
> qemu-system-x86_64: 10:1,len=4
> qemu-system-x86_64: [WRITE]10:ffffffff, len=4
> qemu-system-x86_64: 10:ffffffe1,len=4
> qemu-system-x86_64: [WRITE]10:1, len=4
> qemu-system-x86_64: [WRITE]10:c140, len=4
> virtio_set_status vdev 0x7fbeaba594a0 val 0
> qemu-system-x86_64: 10:c141,len=4
> qemu-system-x86_64: 10:c141,len=4
> qemu-system-x86_64: 10:c141,len=4
> qemu-system-x86_64: 10:c141,len=4
> qemu-system-x86_64: 10:c141,len=4
> virtio_set_status vdev 0x7fbeaba594a0 val 0
> qemu-system-x86_64: 10:c141,len=4
> qemu-system-x86_64: [WRITE]10:ffffffff, len=4
> qemu-system-x86_64: 10:ffffffe1,len=4
> qemu-system-x86_64: [WRITE]10:c141, len=4
> virtio_set_status vdev 0x7fbeaba594a0 val 0
> qemu-system-x86_64: 10:c141,len=4
> qemu-system-x86_64: 10:c141,len=4
> qemu-system-x86_64: 10:c141,len=4
> qemu-system-x86_64: 10:c141,len=4
> 
> I think the following code in pci_default_wirte_config cause the problem,
>    for (i = 0; i < l; val >>= 8, ++i) {
>         uint8_t wmask = d->wmask[addr + i];
>         uint8_t w1cmask = d->w1cmask[addr + i];
>         assert(!(wmask & w1cmask));
>         d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val &
> wmask); d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear
> */ }
> 
> Could you elaborate it for us?
> 
> 
> Best Regards,
> Paul
> 
Hi Paul,

1 in the lowest bit means that that it is an I/O space BAR.

Regarding installation problem on UP VM, the following patch should
fix this problem.
diff --git a/vioserial/sys/Device.c b/vioserial/sys/Device.c
index ecf2433..4fe1e12 100644
--- a/vioserial/sys/Device.c
+++ b/vioserial/sys/Device.c
@@ -547,8 +547,6 @@ VIOSerialEvtDeviceD0Entry(
     {
         VIOSerialInitAllQueues(Device);
         VIOSerialRenewAllPorts(Device);
-        TraceEvents(TRACE_LEVEL_INFORMATION, DBG_INIT, "Setting 
VIRTIO_CONFIG_S_DRIVER_OK flag\n");
-        VirtIODeviceAddStatus(pContext->pIODevice, 
VIRTIO_CONFIG_S_DRIVER_OK);
     }
 
     return STATUS_SUCCESS;
@@ -601,6 +599,8 @@ VIOSerialEvtDeviceD0EntryPostInterruptsEnabled(
     }
     else if (PreviousState == WdfPowerDeviceD3Final)
     {
+        TraceEvents(TRACE_LEVEL_INFORMATION, DBG_INIT, "Setting 
VIRTIO_CONFIG_S_DRIVER_OK flag\n");
+        VirtIODeviceAddStatus(pContext->pIODevice, 
VIRTIO_CONFIG_S_DRIVER_OK);
         TraceEvents(TRACE_LEVEL_INFORMATION, DBG_INIT, "Sending 
VIRTIO_CONSOLE_DEVICE_READY 1\n");
         VIOSerialSendCtrlMsg(WdfDevice, VIRTIO_CONSOLE_BAD_ID, 
VIRTIO_CONSOLE_DEVICE_READY, 1);
     }


Best regards,
Vadim.

> -----Original Message-----
> From: Charles.Tsai-???-?????
> Sent: Mon 3/19/2012 8:32 PM
> To: Vadim Rozenfeld
> Cc: Michael Roth; Stefan Hajnoczi; address@hidden; Alex
> Huang-???-?????; Alon Levy; qemu-devel; Paul Lu-???-????? Subject: RE:
> [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
> 
> Vadim,
> 
> My colleague will give you more  information we found here.
> Qemu somehow in this particular case returns a wrong bar0 value.
> In working case, the bar0 is 0xc140. But in failure case, the bar0 is
> changed to 0xC141.
> 
> 
> 
> -----Original Message-----
> From: Vadim Rozenfeld [mailto:address@hidden
> Sent: Monday, March 19, 2012 8:03 PM
> To: Charles.Tsai-???-?????
> Cc: Michael Roth; Stefan Hajnoczi; address@hidden; Alex
> Huang-???-?????; Alon Levy; qemu-devel; Paul Lu-???-????? Subject: Re:
> [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
> 
> On Monday, March 19, 2012 01:16:56 PM Charles.Tsai-???-????? wrote:
> > Vadim,
> > 
> > What do you mean "qemu configuration string"? Is it the build
> > configuration or command line option? Please let me know it. Thanks.
> 
> Sorry, that was ambiguous.
> I need the command line in order to reproduce the problem.
> 
> Cheers,
> Vadim.
> 
> > -----Original Message-----
> > From: Vadim Rozenfeld [mailto:address@hidden
> > Sent: Monday, March 19, 2012 5:17 PM
> > To: Charles.Tsai-???-?????
> > Cc: Michael Roth; Stefan Hajnoczi; address@hidden;
> > Alex
> > Huang-???-?????; Alon Levy; qemu-devel; Paul Lu-???-????? Subject: Re:
> > [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
> > 
> > On Monday, March 19, 2012 08:29:41 AM Charles.Tsai-???-????? wrote:
> > > Hi Vadim,
> > > 
> > >   We recently encountered with many issues with new Windows Virio
> > > 
> > > driver running on Qemu 1.0 and Qemu 1.0.50. My initial investigation
> > > was found that the new Viro driver could not be installed  before
> > > Qemu 1.0.50. But my colleague right now can install the new Virio
> > > driver on Qemu 1.0. Such a finding is quite a bit surprise to me.
> > 
> > Does Windows refuse to install a new driver or just stuck?
> > 
> > >   When we tested the new Virio driver on both Qemu 1.0 and 1.0.50, we
> > > 
> > > found the Virio driver failed to work after disabling and enabling
> > > the driver a few times. However, the failure case largely depends on
> > > the type of machine. On my machine, I did not see such a problem.
> > 
> > Are you running SMP or UP guest? What about others?
> > 
> > >   Here are a few of questions that I want to clarify for us.
> > >   
> > >   1. Can the new VirIO driver be installed prior Qemu 1.0.50(the
> > > 
> > > current head branch)?
> > 
> > Yes, as far as I know.
> > 
> > > 2. Does your QA team verify the new VirtIo driver prior Qemu 1.0.50?
> > > Do you recommend us to do such a test or debugging?
> > 
> > Our QA test our drivers on top of RHEL only. I don't know exactly what
> > is the difference between our latest qemu-kvm and upstream
> > 
> > >   3. When we disable and enable the new VirtIO driver several times
> > > 
> > > on
> > > 
> > > either Qemu 1.0 or Qemu 1.0.50, VirtIo driver failed to work after
> > > enabling the new VirtIO driver. What we found in this particular
> > > case is that the VirtIO driver was blocked inside the DPC routine where
> > > the driver tried to ACK the interrupt. Based on my colleague's
> > > observation,
> > 
> > the
> > 
> > > I/O read from DPC was not trapped by the front-end driver(a Linux
> > > driver implemented for VirtIO)? Do you have any idea why this could
> > > happen? Also, did you                find similar issues by you or your 
> > > QA?
> > 
> > I know for sure that we have at least one race condition described here:
> > https://bugzilla.redhat.com/show_bug.cgi?id=750773
> > Hence, my question is whether your guest is SMP or UP?
> > 
> > >   Please let us know these as soon as possible since we have a big
> > > 
> > > trouble to make the Virio driver(new and old driver) work stably in
> > > any Qemu official release including Qemu 1.0.50.
> > 
> > I'm going to push some changes, mostly related to the above bug.
> > The DPC problem is completely new for me. Please post your qemu
> > configuration string and I'll try to reproduce it and investigate this
> > problem.
> > 
> > Best regards,
> > Vadim.
> > 
> > > -----Original Message-----
> > > From: Vadim Rozenfeld [mailto:address@hidden
> > > Sent: Wednesday, February 08, 2012 3:47 PM
> > > To: Charles.Tsai-???-?????
> > > Cc: Michael Roth; Stefan Hajnoczi;
> > > address@hidden;
> > > Alex
> > > Huang-???-?????; Alon Levy; qemu-devel; Paul Lu-???-????? Subject: Re:
> > > [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu
> > > 0.15
> > > 
> > > I'm afraid to give you any recommendations regarding QEMU stability.
> > > I usually work with qemu-kvm repository. But we are always doing
> > > WHQL process on RHEL platform only.
> > > 
> > > Maybe someone from the SPICE team can comment on your question?
> > > 
> > > Best regards,
> > > Vadim.
> > > 
> > > ----- Original Message -----
> > > From: "Charles.Tsai-???-?????" <address@hidden>
> > > To: "Vadim Rozenfeld" <address@hidden>
> > > Cc: "Michael Roth" <address@hidden>, "Stefan Hajnoczi"
> > > <address@hidden>, address@hidden, "Alex
> > > Huang-???-?????" <address@hidden>, "Alon Levy"
> > > <address@hidden>, "qemu-devel" <address@hidden>, "Paul
> > > Lu-???-?????" <address@hidden> Sent: Wednesday, February 8,
> > > 2012
> > > 4:39:22 AM
> > > Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest
> > > OS on Qemu 0.15
> > > 
> > > Vadim,
> > > 
> > > Thanks. I tested Windows guest OS driver the over qemu-kvm-devel
> > > 1.0.50 from git://git.kernel.org/pub/scm/virt/kvm/qemu-kvm.git and
> > > it worked. The latest Windows guest driver from
> > > (https://github.com/YanVugenfirer/) seems to have to work with Qemu
> > > 1.0.50. My previous test ran over Qemu 1.0 and that was why it
> > > failed to work.
> > > 
> > > As you mentioned, the latest driver from
> > > (https://github.com/YanVugenfirer/) is much more stable than the old
> > > one. But those drivers must work with Qemu 1.0.50 which was not
> > > verified to be stable. Do you think Qemu 1.0.50 is stable to be used?
> > > Please give us a recommendation.
> > > 
> > > 
> > > -----Original Message-----
> > > From: Vadim Rozenfeld [mailto:address@hidden
> > > Sent: Wednesday, February 08, 2012 3:06 AM
> > > To: Charles.Tsai-???-?????
> > > Cc: Michael Roth; Stefan Hajnoczi;
> > > address@hidden;
> > > Alex
> > > Huang-???-?????; Alon Levy; qemu-devel; Paul Lu-???-????? Subject: Re:
> > > [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu
> > > 0.15
> > > 
> > > I have tried to reproduce the problem several times without success.
> > > 
> > > QEMU:
> > > QEMU 1.0.50 from git://git.qemu.org/qemu.git ,and qemu-kvm-devel
> > > 1.0.50 from git://git.kernel.org/pub/scm/virt/kvm/qemu-kvm.git
> > > 
> > > My guest info:
> > > OS Name:                   Microsoft Windows 7 Enterprise
> > > OS Version:                6.1.7600 N/A Build 7600
> > > 
> > > QEMU command line:
> > > sudo
> > > /home/vrozenfe/work/upstream/qemu/x86_64-softmmu/qemu-system-x86_64
> > > -m
> > > 1024 -smp 1,sockets=1,cores=1,threads=1 -name SERIAL -uuid
> > > d9388815-ddd3-c38e-33c2-a9d5fcc7a775 -monitor stdio -rtc
> > > base=localtime -device
> > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,multifunction=on,addr=
> > > 0x
> > > 5.0x
> > > 0 -drive
> > > file=/home/vrozenfe/work/images/win7.qcow2,if=none,id=drive-ide0-0-0
> > > ,f
> > > orma
> > > t=qcow2 -device
> > > ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootinde
> > > x=
> > > 1
> > > -netdev tap,id=hostnet0 -device
> > > e1000,netdev=hostnet0,id=net0,mac=22:3A:40:3F:2F:12,bus=pci.0,multif
> > > un
> > > ctio
> > > n=on,addr=0x3.0x0 -chardev pty,id=charserial0 -device
> > > isa-serial,chardev=charserial0,id=serial0 -chardev
> > > spicevmc,id=charchannel0,name=vdagent -device
> > > virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=cha
> > > nn
> > > el0,
> > > name=com.redhat.spice.0 -usb -device usb-tablet,id=input0 -device
> > > virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x4.0
> > > x0 -cdrom /home/vrozenfe/work/virtio-win-1.4.0.iso -snapshot
> > > -enable-kvm
> > > 
> > > Drivers:
> > > Both, MS signed from RHEL6.2 virtio-win RPM, as well as compiled by
> > > myself with the sources from our internal repository (which contains
> > > absolutely the same code as in Yan's repository).
> > > 
> > > 
> > > 
> > > ----- Original Message -----
> > > From: "Charles.Tsai-???-?????" <address@hidden>
> > > To: "Vadim Rozenfeld" <address@hidden>
> > > Cc: "Michael Roth" <address@hidden>, "Stefan Hajnoczi"
> > > <address@hidden>, address@hidden, "Alex
> > > Huang-???-?????" <address@hidden>, "Alon Levy"
> > > <address@hidden>, "qemu-devel" <address@hidden>, "Paul
> > > Lu-???-?????" <address@hidden> Sent: Monday, February 6, 2012
> > > 3:08:55 PM
> > > Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest
> > > OS on Qemu 0.15
> > > 
> > > Vadim,
> > > 
> > > I did the same test again today and no luck to made it work.
> > > Let us what you find since we might have missed some points when we
> > > did the test.
> > > 
> > > 
> > > -----Original Message-----
> > > From: Vadim Rozenfeld [mailto:address@hidden
> > > Sent: Sunday, February 05, 2012 2:14 AM
> > > To: Charles.Tsai-???-?????
> > > Cc: Michael Roth; Stefan Hajnoczi;
> > > address@hidden;
> > > Alex
> > > Huang-???-?????; Alon Levy; qemu-devel; Paul Lu-???-????? Subject: Re:
> > > [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu
> > > 0.15
> > > 
> > > Thanks,
> > > I'll check this problem.
> > > Vadim.
> > > 
> > > ----- Original Message -----
> > > From: "Charles.Tsai-???-?????" <address@hidden>
> > > To: "Charles.Tsai-???-?????" <address@hidden>, "Vadim
> > > Rozenfeld" <address@hidden> Cc: "Michael Roth"
> > > <address@hidden>, "Stefan Hajnoczi" <address@hidden>,
> > > address@hidden,
> > > "Alex Huang-???-?????" <address@hidden>, "Alon Levy"
> > > <address@hidden>, "qemu-devel" <address@hidden>, "Paul
> > > Lu-???-?????" <address@hidden> Sent: Saturday, February 4,
> > > 2012
> > > 5:39:26 AM
> > > Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest
> > > OS on Qemu 0.15
> > > 
> > > Vadim,
> > > 
> > > We tested the free build driver on 32-bit Windows 7 and the symptom
> > > was the same. In other words, the latest driver source from
> > > https://github.com/YanVugenfirer/ is buggy and it was not workable
> > > at all.
> > > 
> > > 
> > > 
> > > -----Original Message-----
> > > From: Charles.Tsai-???-?????
> > > Sent: Friday, February 03, 2012 12:01 PM
> > > To: 'Vadim Rozenfeld'
> > > Cc: Michael Roth; Stefan Hajnoczi;
> > > address@hidden;
> > > Alex
> > > Huang-???-?????; Alon Levy; qemu-devel; Paul Lu-???-????? Subject: RE:
> > > [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu
> > > 0.15
> > > 
> > > Vadim,
> > > 
> > > I downloaded the latest Windows guest driver code from
> > > (https://github.com/YanVugenfirer/) and built the test binary driver
> > > code. When I tested the release build Vioserial driver on 64-bit
> > > Windows 7, the driver seemed to wait for something to happen and the
> > > update driver Windows dialog simply just stayed in busy state.
> > > Finally, the Windows system entered a busy loop. However, if I
> > > tested the debugging build driver, the driver could be installed.
> > > But it took for a long time to complete.
> > > 
> > > Our installed Qemu is 1.0. Is there Qemu build requirement so that
> > > we can verify the vioserial driver? From my test, the latest code
> > > from
> > > (https://github.com/YanVugenfirer/) seemed to be worst than the one
> > > we tested before. Let me know if we did anything wrong.
> > > 
> > > 
> > > -----Original Message-----
> > > From: Vadim Rozenfeld [mailto:address@hidden
> > > Sent: Friday, January 20, 2012 8:48 PM
> > > To: Charles.Tsai-???-?????
> > > Cc: Michael Roth; Stefan Hajnoczi;
> > > address@hidden;
> > > Alex
> > > Huang-???-?????; Alon Levy; qemu-devel Subject: Re: [Qemu-devel]
> > > [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
> > > 
> > > This code is slightly buggy.
> > > Please try Yan's repository
> > > at github (https://github.com/YanVugenfirer/).
> > > I believe that the most critical changes have been merged already by
> > > Yan into this public repository. I will ask to update binaries and
> > > sources at fedoraproject site as well.
> > > 
> > > Best regards,
> > > Vadim.
> > > 
> > > 
> > > ----- Original Message -----
> > > From: "Charles.Tsai-???-?????" <address@hidden>
> > > To: "Vadim Rozenfeld" <address@hidden>
> > > Cc: "Michael Roth" <address@hidden>, "Stefan Hajnoczi"
> > > <address@hidden>, address@hidden, "Alex
> > > Huang-???-?????" <address@hidden>, "Alon Levy"
> > > <address@hidden>, "qemu-devel" <address@hidden> Sent:
> > > Friday, January 20, 2012 3:25:51 AM
> > > Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest
> > > OS on Qemu 0.15
> > > 
> > > Vadim,
> > > 
> > > We downloaded the driver source from the following website.
> > > ===========================================================
> > > wget --no-check-certificate
> > > https://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/src/v
> > > ir
> > > tio-
> > > win-prewhql-0.1-15-sources.zip
> > > 
> > > -----Original Message-----
> > > From: Vadim Rozenfeld [mailto:address@hidden
> > > Sent: Thursday, January 19, 2012 8:25 PM
> > > To: Charles.Tsai-???-?????
> > > Cc: Michael Roth; Stefan Hajnoczi;
> > > address@hidden;
> > > Alex
> > > Huang-???-?????; Alon Levy; qemu-devel Subject: Re: [Qemu-devel]
> > > [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
> > > 
> > > Just to be sure that we are on the same page:
> > > could you tell me about the origin of the source?
> > > Is it the latest from the Yan's repository at github.com?
> > > 
> > > ----- Original Message -----
> > > From: "Charles.Tsai-???-?????" <address@hidden>
> > > To: "Vadim Rozenfeld" <address@hidden>
> > > Cc: "Michael Roth" <address@hidden>, "Stefan Hajnoczi"
> > > <address@hidden>, address@hidden, "Alex
> > > Huang-???-?????" <address@hidden>, "Alon Levy"
> > > <address@hidden>, "qemu-devel" <address@hidden> Sent:
> > > Thursday, January 19, 2012 12:06:16 PM
> > > Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest
> > > OS on Qemu 0.15
> > > 
> > > Vadim,
> > > 
> > > We built it from the driver source. Up to this moment, we always use
> > > the same binary to test Qemu.
> > > 
> > > 
> > > -----Original Message-----
> > > From: Vadim Rozenfeld [mailto:address@hidden
> > > Sent: Thursday, January 19, 2012 5:39 PM
> > > To: Charles.Tsai-???-?????
> > > Cc: Michael Roth; Stefan Hajnoczi;
> > > address@hidden;
> > > Alex
> > > Huang-???-?????; Alon Levy; qemu-devel Subject: RE: [Qemu-devel]
> > > [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
> > > 
> > > On Thu, 2012-01-19 at 16:33 +0800, Charles.Tsai-???-????? wrote:
> > > > Vadim,
> > > > 
> > > > It is SMP system.
> > > 
> > > What about vioserial driver itself?
> > > did you build it from sources or is
> > > it one, available through RHEL channels?
> > > 
> > > > -----Original Message-----
> > > > From: Vadim Rozenfeld [mailto:address@hidden
> > > > Sent: Thursday, January 19, 2012 3:58 PM
> > > > To: Charles.Tsai-???-?????
> > > > Cc: Michael Roth; Stefan Hajnoczi;
> > > > address@hidden;
> > > > Alex Huang-???-?????; Alon Levy; qemu-devel
> > > > Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest
> > > > OS on Qemu 0.15
> > > > 
> > > > On Thu, 2012-01-19 at 09:41 +0800, Charles.Tsai-???-????? wrote:
> > > > > Vadim,
> > > > > 
> > > > > I tested on Qemu 1.0.50. and found the VioSerial driver had
> > > > > problem to install on 64-bit Win7 guest. During the driver
> > > > > installation, the system hung after the driver being installed.
> > > > > After I rebooted the guest OS, the Vioserial driver work. The
> > > > > hang system seemed to be found only during the driver installation.
> > > > 
> > > > On UP or SMP system?
> > > > 
> > > > > -----Original Message-----
> > > > > From: Vadim Rozenfeld [mailto:address@hidden
> > > > > Sent: Wednesday, January 18, 2012 4:57 AM
> > > > > To: Michael Roth
> > > > > Cc: Charles.Tsai-???-?????; Stefan Hajnoczi;
> > > > > address@hidden; Alex Huang-???-?????; Alon
> > > > > Levy; qemu-devel
> > > > > Subject: Re: [Qemu-devel] [Spice-devel] Vioserial of Windows
> > > > > guest OS on Qemu 0.15
> > > > > 
> > > > > On Mon, 2012-01-16 at 19:50 -0600, Michael Roth wrote:
> > > > > > On 01/15/2012 08:02 PM, Charles.Tsai-???-????? wrote:
> > > > > > > Vadim,
> > > > > > > 
> > > > > > > Thank you for your prompt reply. Here are the information
> > > > > > > for our test case.
> > > > > > > 
> > > > > > > 
> > > > > > > 1) we use the following command line to launch the guest OS
> > > > > > > 
> > > > > > > 
> > > > > > > /usr/bin/kvm -S -M pc-0.14 -enable-kvm -m 1024 -smp
> > > > > > > 1,sockets=1,cores=1,threads=1 -name win_xp -uuid
> > > > > > > d9388815-ddd3-c38e-33c2-a9d5fcc7a775 -nodefconfig
> > > > > > > -nodefaults -chardev
> > > > > > > socket,id=charmonitor,path=/var/lib/libvirt/qemu/win_xp.moni
> > > > > > > to
> > > > > > > r,
> > > > > > > se rv er,nowait -mon
> > > > > > > chardev=charmonitor,id=monitor,mode=readline
> > > > > > > -rtc base=localtime
> > > > > > > -device
> > > > > > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,multifunction=
> > > > > > > on
> > > > > > > ,a
> > > > > > > dd
> > > > > > > r=
> > > > > > > 0x5.0x0 -drive
> > > > > > > file=/media/Images/Windows-XP.img,if=none,id=drive-ide0-0-0,
> > > > > > > fo
> > > > > > > rm
> > > > > > > at
> > > > > > > =r
> > > > > > > aw -device
> > > > > > > ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,
> > > > > > > bo
> > > > > > > ot
> > > > > > > in
> > > > > > > de
> > > > > > > x=1
> > > > > > > -netdev tap,fd=17,id=hostnet0 -device
> > > > > > > rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:e8:dc:b1,bus=pci.
> > > > > > > 0,
> > > > > > > mu
> > > > > > > lt
> > > > > > > ifunction=on,addr=0x3.0x0
> > > > > > > -chardev pty,id=charserial0
> > > > > > > -device isa-serial,chardev=charserial0,id=serial0
> > > > > > > -chardev spicevmc,id=charchannel0,name=vdagent
> > > > > > > -device
> > > > > > > virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel
> > > > > > > 0,
> > > > > > > id
> > > > > > > =c
> > > > > > > ha
> > > > > > > nnel0,name=com.redhat.spice.0 -usb -device
> > > > > > > usb-tablet,id=input0 -spice
> > > > > > > port=5900,addr=0.0.0.0,disable-ticketing
> > > > > > > -vga qxl -global qxl-vga.vram_size=67108864 -device
> > > > > > > virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,ad
> > > > > > > dr
> > > > > > > =0
> > > > > > > x4
> > > > > > > .0
> > > > > > > x0
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > 2). In Guest Windows XP OS
> > > > > > > 
> > > > > > > 
> > > > > > > When the following callback function of the vioserial device
> > > > > > > is called in guest OS. The allocated resources is empty.
> > > > > > > 
> > > > > > > 
> > > > > > > VIOSerialEvtDevicePrepareHardware() ---This function is to
> > > > > > > get the I/O address of the vioserial device and map the
> > > > > > > physical address to the logical address space.
> > > > > > > 
> > > > > > > I added the following trace and the value of nListSize is ZERO.
> > > > > > > TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "%s
> > > > > > > (nListSize=%d)\n", __FUNCTION__,nListSize);
> > > > > > > 
> > > > > > > 
> > > > > > > So far, we have tested Qemu 0.14 without any problem but
> > > > > > > Qemu
> > > > > > > 0.15 seemed to be broken in vioserial device. Let me know if
> > > > > > > you need further information. Thanks.
> > > > > > 
> > > > > > Hi Charles,
> > > > > > 
> > > > > > What versions of the virtio-win drivers are you using?
> > > > > > 
> > > > > > I've been testing virtio-serial on windows using the latest
> > > > > > qemu.git (1.0). Linux guests work fine, but I've been having
> > > > > > various issues with Windows 7, XP SP3, and Server 2008 R1. XP
> > > > > > SP3
> > > > > > 
> > > > > > works intermittently for me using RHEL6.0 virtio-win, as well
> > > > > > as the
> > 
> > drivers at:
> > > > > I have seen some virtio serial port initialization problems on
> > > > > 1.0.50. Will try to look into this problem in the following
> > > > > week(s).
> > > > > 
> > > > > > http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/
> > > > > > bi
> > > > > > n/
> > > > > > 
> > > > > > But I've been getting a mix of issues such as guest hangs,
> > > > > > vioser-test failing to enumerate any virtio-serial devices, or
> > > > > > various non-critical error messages from qemu that seem to
> > > > > > coincide with the channel being open/closed (occasionally
> > > > > > resulting in the channel becoming unresponsive).
> > > > > > 
> > > > > > Do any of these seem similar to the behaviour you're seeing?
> > > > > > If so I'll see if the issues go away on 0.14.0 and follow-up
> > > > > > with a git bisect.