[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 965327] Re: virtio-pci: can't reserve io 0x0000-0x001f
From: |
Kenneth Salerno |
Subject: |
[Qemu-devel] [Bug 965327] Re: virtio-pci: can't reserve io 0x0000-0x001f |
Date: |
Fri, 13 Apr 2012 21:54:17 -0000 |
This might be easier to read and understand:
GOOD
Populating /address@hidden,0
Adapters on 0000000000000000
00 0000 (D) : 1af4 1000 virtio [ net ]
00 0800 (D) : 1af4 1001 virtio [ block ]
...
PCI host bridge /address@hidden,0 ranges:
IO 0x0000010080000000..0x000001008000ffff -> 0x0000000000000000
MEM 0x00000100a0000000..0x00000100bfffffff -> 0x0000000080000000
...
virtio-pci 0000:00:00.0: enabling device (0100 -> 0101)
virtio-pci 0000:00:01.0: enabling device (0100 -> 0101)
BAD
Populating /address@hidden,0
Adapters on 0800000020000001
00 0000 (D) : 1af4 1000 virtio [ net ]
00 0800 (D) : 1af4 1001 virtio [ block ]
...
PCI host bridge /address@hidden,0 ranges:
IO 0x0000000000000100..0x80000000000000ff -> 0xa0fa220000000000
...
virtio-pci 0000:00:00.0: device not available (can't reserve [io
0x0000-0x001f])
virtio-pci: probe of 0000:00:00.0 failed with error -22
virtio-pci 0000:00:01.0: device not available (can't reserve [io
0x0000-0x003f])
virtio-pci: probe of 0000:00:01.0 failed with error -22
Note the PCI host bridge does not have memory reserved in the "bad" output.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/965327
Title:
virtio-pci: can't reserve io 0x0000-0x001f
Status in QEMU:
New
Bug description:
Before 2012-03-05 I was able to successfully enable a virtio-pci block
device from a sPAPR pseries ppc64 Linux guest. With the current git
master branch after this date I get the following error:
virtio-pci 0000:00:00.0: device not available (can't reserve [io
0x0000-0x001f])
virtio-pci: probe of 0000:00:00.0 failed with error -22
virtio-pci 0000:00:01.0: device not available (can't reserve [io
0x0000-0x003f])
virtio-pci: probe of 0000:00:01.0 failed with error -22
Full details:
-----------------
command line:
-----------------
./testing/qemu/ppc64-softmmu/qemu-system-ppc64 \
-L ./testing/qemu/pc-bios \
-M pseries \
-m 1024 \
-rtc base=localtime \
-parallel none \
-netdev
type=user,id=mynet0,hostfwd=tcp:127.0.0.1:9011-10.0.2.11:22 \
-device virtio-net-pci,netdev=mynet0 \
-drive
file=images/suse-ppc.img,if=virtio,index=0,media=disk,cache=unsafe \
-kernel images/iso/suseboot/vmlinux \
-append "root=/dev/mapper/system-root ro audit=0
selinux=0 apparmor=0 console=tty0 console=ttyPZ0" \
-initrd images/iso/suseboot/initrd.img \
-gdb tcp::1234
------------------------------------------------------
BEFORE virtio-pci "bug/user error?" introduced:
------------------------------------------------------
sPAPR memory map:
RTAS : 0x3fff0000..3fff0013
FDT : 0x3ffe0000..3ffeffff
Kernel : 0x00400000..01abad7b
Ramdisk : 0x01ad0000..02053df7
Firmware load : 0x00000000..000d6ec0
Firmware runtime : 0x3d7e0000..3ffe0000
sPAPR reset
SLOF **********************************************************************
QEMU Starting
Build Date = Mar 3 2012 21:46:40
FW Version = git-440e662879c4fc3c
Press "s" to enter Open Firmware.
Populating /vdevice methods
Populating /vdevice/address@hidden
VSCSI: Initializing
VSCSI: Looking for disks
SCSI ID 2 CD-ROM : "QEMU QEMU CD-ROM 1.0."
Populating /vdevice/address@hidden
Populating /address@hidden,0
Adapters on 0000000000000000
00 0000 (D) : 1af4 1000 virtio [ net ]
00 0800 (D) : 1af4 1001 virtio [ block ]
No NVRAM common partition, re-initializing...
Using default console: /vdevice/address@hidden
Detected RAM kernel at 400000 (16bad7c bytes)
Welcome to Open Firmware
Copyright (c) 2004, 2011 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/address@hidden
Preparing to boot Linux version 3.2.0-2-ppc64 (address@hidden) (gcc version
4.6.2 20111212 [gcc-4_6-branch revision 182222] (SUSE Linux) ) #1 SMP Wed Jan
25 10:51:08 UTC 2012 (2206a5c)
Detected machine type: 0000000000000101
Max number of cores passed to firmware: 1024 (NR_CPUS = 1024)
Calling ibm,client-architecture-support... not implemented
couldn't open /packages/elf-loader
command line: root=/dev/mapper/system-root ro audit=0 selinux=0 apparmor=0
console=tty0 console=ttyPZ0
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000001ad0000
alloc_top : 0000000030000000
alloc_top_hi : 0000000040000000
rmo_top : 0000000030000000
ram_top : 0000000040000000
instantiating rtas at 0x000000002fff0000... done
Querying for OPAL presence... not there.
boot cpu hw idx 0
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x00000000020e0000 -> 0x00000000020e0635
Device tree struct 0x00000000020f0000 -> 0x0000000002100000
Calling quiesce...
returning from prom_init
Using pSeries machine description
Using 1TB segments
Found initrd at 0xc000000001ad0000:0xc000000002053df8
bootconsole [udbg0] enabled
CPU maps initialized for 1 thread per core
Starting Linux PPC64 #1 SMP Wed Jan 25 10:51:08 UTC 2012 (2206a5c)
-----------------------------------------------------
ppc64_pft_size = 0x18
physicalMemorySize = 0x40000000
htab_hash_mask = 0x1ffff
-----------------------------------------------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-2-ppc64 (address@hidden) (gcc version 4.6.2 20111212
[gcc-4_6-branch revision 182222] (SUSE Linux) ) #1 SMP Wed Jan 25 10:51:08 UTC
2012 (2206a5c)
CF000012
Setup Arch[boot]0012 Setup Arch
PCI host bridge /address@hidden,0 ranges:
IO 0x0000010080000000..0x000001008000ffff -> 0x0000000000000000
MEM 0x00000100a0000000..0x00000100bfffffff -> 0x0000000080000000
Zone PFN ranges:
DMA 0x00000000 -> 0x00004000
Normal empty
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
CF000015
Setup Done[boot]0015 Setup Done
PERCPU: Embedded 2 pages/cpu @c000000002200000 s83840 r0 d47232 u1048576
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16370
Policy zone: DMA
Kernel command line: root=/dev/mapper/system-root ro audit=0 selinux=0
apparmor=0 console=tty0 console=ttyPZ0
audit: disabled (until reboot)
PID hash table entries: 4096 (order: -1, 32768 bytes)
freeing bootmem node 0
Memory: 1014336k/1048576k available (18112k kernel code, 34240k reserved,
2048k data, 3115k bss, 6272k init)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:512 nr_irqs:512 16
clocksource: timebase mult[7d0000] shift[22] registered
Console: colour dummy device 80x25
console [tty0] enabled
Using pSeries machine description
Using 1TB segments
Found initrd at 0xc000000001ad0000:0xc000000002053df8
bootconsole [udbg0] enabled
CPU maps initialized for 1 thread per core
Starting Linux PPC64 #1 SMP Wed Jan 25 10:51:08 UTC 2012 (2206a5c)
-----------------------------------------------------
ppc64_pft_size = 0x18
physicalMemorySize = 0x40000000
htab_hash_mask = 0x1ffff
-----------------------------------------------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-2-ppc64 (address@hidden) (gcc version 4.6.2 20111212
[gcc-4_6-branch revision 182222] (SUSE Linux) ) #1 SMP Wed Jan 25 10:51:08 UTC
2012 (2206a5c)
[boot]0012 Setup Arch
PCI host bridge /address@hidden,0 ranges:
IO 0x0000010080000000..0x000001008000ffff -> 0x0000000000000000
MEM 0x00000100a0000000..0x00000100bfffffff -> 0x0000000080000000
Zone PFN ranges:
DMA 0x00000000 -> 0x00004000
Normal empty
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
[boot]0015 Setup Done
PERCPU: Embedded 2 pages/cpu @c000000002200000 s83840 r0 d47232 u1048576
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16370
Policy zone: DMA
Kernel command line: root=/dev/mapper/system-root ro audit=0 selinux=0
apparmor=0 console=tty0 console=ttyPZ0
audit: disabled (until reboot)
PID hash table entries: 4096 (order: -1, 32768 bytes)
freeing bootmem node 0
Memory: 1014336k/1048576k available (18112k kernel code, 34240k reserved,
2048k data, 3115k bss, 6272k init)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:512 nr_irqs:512 16
clocksource: timebase mult[7d0000] shift[22] registered
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
console [hvc0] enabled
allocated 524288 bytes of page_cgroup
allocated 524288 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
please try 'cgroup_disable=memory' option if you don't want memory cgroups
pid_max: default: 32768 minimum: 301
pid_max: default: 32768 minimum: 301
Security Framework initialized
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 131072 (order: 4, 1048576 bytes)
Dentry cache hash table entries: 131072 (order: 4, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 3, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 3, 524288 bytes)
Mount-cache hash table entries: 4096
Mount-cache hash table entries: 4096
Initializing cgroup subsys cpuacct
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys perf_event
POWER7 performance monitor hardware support registered
POWER7 performance monitor hardware support registered
Brought up 1 CPUs
Brought up 1 CPUs
Enabling Asymmetric SMT scheduling
Enabling Asymmetric SMT scheduling
devtmpfs: initialized
devtmpfs: initialized
print_constraints: dummy:
print_constraints: dummy:
NET: Registered protocol family 16
NET: Registered protocol family 16
IBM eBus Device Driver
IBM eBus Device Driver
nvram: No room to create ibm,rtas-log partition, deleting any obsolete OS
partitions...
nvram: No room to create ibm,rtas-log partition, deleting any obsolete OS
partitions...
nvram: Failed to find or create ibm,rtas-log partition, err -28
nvram: Failed to find or create ibm,rtas-log partition, err -28
nvram: No room to create lnx,oops-log partition, deleting any obsolete OS
partitions...
nvram: No room to create lnx,oops-log partition, deleting any obsolete OS
partitions...
nvram: Failed to find or create lnx,oops-log partition, err -28
nvram: Failed to find or create lnx,oops-log partition, err -28
SUSE Linux
#1 SMP Wed Jan 2CPU Hotplug not supported by firmware - disabling.
CPU Hotplug not supported by firmware - disabling.
PCI: Probing PCI hardware
PCI: Probing PCI hardware
pci_dma_dev_setup_pSeriesLP: no DMA window found for pci dev=0000:00:00.0
dn=/address@hidden,0/address@hidden
pci_dma_dev_setup_pSeriesLP: no DMA window found for pci dev=0000:00:00.0
dn=/address@hidden,0/address@hidden
pci_dma_dev_setup_pSeriesLP: no DMA window found for pci dev=0000:00:01.0
dn=/address@hidden,0/address@hidden
pci_dma_dev_setup_pSeriesLP: no DMA window found for pci dev=0000:00:01.0
dn=/address@hidden,0/address@hidden
opal: Node not found
opal: Node not found
bio: create slab <bio-0> at 0
bio: create slab <bio-0> at 0
vgaarb: loaded
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new device driver usb
NetLabel: Initializing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NetLabel: unlabeled traffic allowed by default
Switching to clocksource timebase
Switching to clocksource timebase
NET: Registered protocol family 2
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 0, 65536 bytes)
IP route cache hash table entries: 8192 (order: 0, 65536 bytes)
TCP established hash table entries: 32768 (order: 3, 524288 bytes)
TCP established hash table entries: 32768 (order: 3, 524288 bytes)
TCP bind hash table entries: 32768 (order: 3, 524288 bytes)
TCP bind hash table entries: 32768 (order: 3, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP reno registered
UDP hash table entries: 2048 (order: 0, 65536 bytes)
UDP hash table entries: 2048 (order: 0, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 1
Unpacking initramfs...
Unpacking initramfs...
Freeing initrd memory: 5696k freed
Freeing initrd memory: 5696k freed
rtasd: No event-scan on system
rtasd: No event-scan on system
rtas_flash: no firmware flash support
rtas_flash: no firmware flash support
IOMMU table initialized, virtual merging enabled
IOMMU table initialized, virtual merging enabled
vio 30000000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff,
table unavailable
vio 30000000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff,
table unavailable
HugeTLB registered 16 MB page size, pre-allocated 0 pages
HugeTLB registered 16 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
msgmni has been set to 1992
msgmni has been set to 1992
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler noop registered
io scheduler deadline registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
rpadlpar_io_init: partition not DLPAR capable
rpadlpar_io_init: partition not DLPAR capable
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <address@hidden>)
pmac_zilog: 0.6 (Benjamin Herrenschmidt <address@hidden>)
Fixed MDIO Bus: probed
Fixed MDIO Bus: probed
arcnet loaded.
arcnet loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
EDAC MC: Ver: 2.1.0
EDAC MC: Ver: 2.1.0
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
TCP cubic registered
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 10
NET: Registered protocol family 15
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
Registering the dns_resolver key type
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
turn off boot console udbg0
turn off boot console udbg0
registered taskstats version 1
/home/abuild/rpmbuild/BUILD/kernel-ppc64-3.2.0/linux-3.2/drivers/rtc/hctosys.c:
unable to open rtc device (rtc0)
Freeing unused kernel memory: 6272k freed
doing fast boot
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: address@hidden
SCSI subsystem initialized
alua: device handler registered
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
Creating device nodes with udev
udevd[78]: starting version 173
virtio-pci 0000:00:00.0: enabling device (0100 -> 0101)
virtio-pci 0000:00:01.0: enabling device (0100 -> 0101)
udevd[95]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl'
'/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or
directory
vda: [mac] vda1 vda2 vda3 vda4
mount: devpts already mounted or /dev/pts busy
mount: according to mtab, devpts is already mounted on /dev/pts
Boot logging started on /dev/hvc0(/dev/console) at Mon Mar 26 10:04:22 2012
md: linear personality registered for level -1
3 logical volume(s) in volume group "system" now active
3 logical volume(s) in volume group "system" now active
resume device not found (ignoring)
Waiting for device /dev/mapper/system-root to appear: ok
fsck from util-linux 2.21
[/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/system-root
[...continues normally...]
------------------------------------------------------
AFTER virtio-pci "bug/user error?" introduced:
------------------------------------------------------
sPAPR memory map:
RTAS : 0x3fff0000..3fff0013
FDT : 0x3ffe0000..3ffeffff
Kernel : 0x00400000..01abad7b
Ramdisk : 0x01ad0000..02053df7
Firmware load : 0x00000000..000d6ec0
Firmware runtime : 0x3d7e0000..3ffe0000
sPAPR reset
SLOF **********************************************************************
QEMU Starting
Build Date = Mar 3 2012 21:46:40
FW Version = git-440e662879c4fc3c
Press "s" to enter Open Firmware.
Populating /vdevice methods
Populating /vdevice/address@hidden
VSCSI: Initializing
VSCSI: Looking for disks
Populating /vdevice/address@hidden
Populating /address@hidden,0
Adapters on 0800000020000001
00 0000 (D) : 1af4 1000 virtio [ net ]
00 0800 (D) : 1af4 1001 virtio [ block ]
No NVRAM common partition, re-initializing...
Using default console: /vdevice/address@hidden
Detected RAM kernel at 400000 (16bad7c bytes)
Welcome to Open Firmware
Copyright (c) 2004, 2011 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Booting from memory...
OF stdout device is: /vdevice/address@hidden
Preparing to boot Linux version 3.2.0-2-ppc64 (address@hidden) (gcc version
4.6.2 20111212 [gcc-4_6-branch revision 182222] (SUSE Linux) ) #1 SMP Wed Jan
25 10:51:08 UTC 2012 (2206a5c)
Detected machine type: 0000000000000101
Max number of cores passed to firmware: 1024 (NR_CPUS = 1024)
Calling ibm,client-architecture-support... not implemented
couldn't open /packages/elf-loader
command line: root=/dev/mapper/system-root ro audit=0 selinux=0 apparmor=0
console=tty0 console=ttyPZ0
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000001ad0000
alloc_top : 0000000030000000
alloc_top_hi : 0000000040000000
rmo_top : 0000000030000000
ram_top : 0000000040000000
instantiating rtas at 0x000000002fff0000... done
Querying for OPAL presence... not there.
boot cpu hw idx 0
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x00000000020e0000 -> 0x00000000020e062f
Device tree struct 0x00000000020f0000 -> 0x0000000002100000
Calling quiesce...
returning from prom_init
Using pSeries machine description
Using 1TB segments
Found initrd at 0xc000000001ad0000:0xc000000002053df8
bootconsole [udbg0] enabled
CPU maps initialized for 1 thread per core
Starting Linux PPC64 #1 SMP Wed Jan 25 10:51:08 UTC 2012 (2206a5c)
-----------------------------------------------------
ppc64_pft_size = 0x18
physicalMemorySize = 0x40000000
htab_hash_mask = 0x1ffff
-----------------------------------------------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-2-ppc64 (address@hidden) (gcc version 4.6.2 20111212
[gcc-4_6-branch revision 182222] (SUSE Linux) ) #1 SMP Wed Jan 25 10:51:08 UTC
2012 (2206a5c)
CF000012
Setup Arch[boot]0012 Setup Arch
PCI host bridge /address@hidden,0 ranges:
IO 0x0000000000000100..0x80000000000000ff -> 0xa0fa220000000000
Zone PFN ranges:
DMA 0x00000000 -> 0x00004000
Normal empty
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
CF000015
Setup Done[boot]0015 Setup Done
PERCPU: Embedded 2 pages/cpu @c000000002200000 s83840 r0 d47232 u1048576
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16370
Policy zone: DMA
Kernel command line: root=/dev/mapper/system-root ro audit=0 selinux=0
apparmor=0 console=tty0 console=ttyPZ0
audit: disabled (until reboot)
PID hash table entries: 4096 (order: -1, 32768 bytes)
freeing bootmem node 0
Memory: 1014336k/1048576k available (18112k kernel code, 34240k reserved,
2048k data, 3115k bss, 6272k init)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:512 nr_irqs:512 16
clocksource: timebase mult[7d0000] shift[22] registered
Console: colour dummy device 80x25
console [tty0] enabled
Using pSeries machine description
Using 1TB segments
Found initrd at 0xc000000001ad0000:0xc000000002053df8
bootconsole [udbg0] enabled
CPU maps initialized for 1 thread per core
Starting Linux PPC64 #1 SMP Wed Jan 25 10:51:08 UTC 2012 (2206a5c)
-----------------------------------------------------
ppc64_pft_size = 0x18
physicalMemorySize = 0x40000000
htab_hash_mask = 0x1ffff
-----------------------------------------------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-2-ppc64 (address@hidden) (gcc version 4.6.2 20111212
[gcc-4_6-branch revision 182222] (SUSE Linux) ) #1 SMP Wed Jan 25 10:51:08 UTC
2012 (2206a5c)
[boot]0012 Setup Arch
PCI host bridge /address@hidden,0 ranges:
IO 0x0000000000000100..0x80000000000000ff -> 0xa0fa220000000000
Zone PFN ranges:
DMA 0x00000000 -> 0x00004000
Normal empty
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
[boot]0015 Setup Done
PERCPU: Embedded 2 pages/cpu @c000000002200000 s83840 r0 d47232 u1048576
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16370
Policy zone: DMA
Kernel command line: root=/dev/mapper/system-root ro audit=0 selinux=0
apparmor=0 console=tty0 console=ttyPZ0
audit: disabled (until reboot)
PID hash table entries: 4096 (order: -1, 32768 bytes)
freeing bootmem node 0
Memory: 1014336k/1048576k available (18112k kernel code, 34240k reserved,
2048k data, 3115k bss, 6272k init)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:512 nr_irqs:512 16
clocksource: timebase mult[7d0000] shift[22] registered
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
console [hvc0] enabled
allocated 524288 bytes of page_cgroup
allocated 524288 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
please try 'cgroup_disable=memory' option if you don't want memory cgroups
pid_max: default: 32768 minimum: 301
pid_max: default: 32768 minimum: 301
Security Framework initialized
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 131072 (order: 4, 1048576 bytes)
Dentry cache hash table entries: 131072 (order: 4, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 3, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 3, 524288 bytes)
Mount-cache hash table entries: 4096
Mount-cache hash table entries: 4096
Initializing cgroup subsys cpuacct
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys perf_event
POWER7 performance monitor hardware support registered
POWER7 performance monitor hardware support registered
Brought up 1 CPUs
Brought up 1 CPUs
Enabling Asymmetric SMT scheduling
Enabling Asymmetric SMT scheduling
devtmpfs: initialized
devtmpfs: initialized
print_constraints: dummy:
print_constraints: dummy:
NET: Registered protocol family 16
NET: Registered protocol family 16
IBM eBus Device Driver
IBM eBus Device Driver
nvram: No room to create ibm,rtas-log partition, deleting any obsolete OS
partitions...
nvram: No room to create ibm,rtas-log partition, deleting any obsolete OS
partitions...
nvram: Failed to find or create ibm,rtas-log partition, err -28
nvram: Failed to find or create ibm,rtas-log partition, err -28
nvram: No room to create lnx,oops-log partition, deleting any obsolete OS
partitions...
nvram: No room to create lnx,oops-log partition, deleting any obsolete OS
partitions...
nvram: Failed to find or create lnx,oops-log partition, err -28
nvram: Failed to find or create lnx,oops-log partition, err -28
SUSE Linux
#1 SMP Wed Jan 2CPU Hotplug not supported by firmware - disabling.
CPU Hotplug not supported by firmware - disabling.
PCI: Probing PCI hardware
PCI: Probing PCI hardware
vmap allocation for size 2376249136786767872 failed: use vmalloc=<size> to
increase size.
vmap allocation for size 2376249136786767872 failed: use vmalloc=<size> to
increase size.
PCI: Memory resource 0 not set for host bridge /address@hidden,0 (domain 0)
PCI: Memory resource 0 not set for host bridge /address@hidden,0 (domain 0)
pci_dma_dev_setup_pSeriesLP: no DMA window found for pci dev=0000:00:00.0
dn=/address@hidden,0/address@hidden
pci_dma_dev_setup_pSeriesLP: no DMA window found for pci dev=0000:00:00.0
dn=/address@hidden,0/address@hidden
pci_dma_dev_setup_pSeriesLP: no DMA window found for pci dev=0000:00:01.0
dn=/address@hidden,0/address@hidden
pci_dma_dev_setup_pSeriesLP: no DMA window found for pci dev=0000:00:01.0
dn=/address@hidden,0/address@hidden
PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
PCI: Cannot allocate resource region 6 of device 0000:00:00.0, will remap
PCI: Cannot allocate resource region 6 of device 0000:00:00.0, will remap
PCI: Cannot allocate resource region 0 of device 0000:00:01.0, will remap
PCI: Cannot allocate resource region 0 of device 0000:00:01.0, will remap
opal: Node not found
opal: Node not found
bio: create slab <bio-0> at 0
bio: create slab <bio-0> at 0
vgaarb: loaded
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new device driver usb
NetLabel: Initializing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NetLabel: unlabeled traffic allowed by default
Switching to clocksource timebase
Switching to clocksource timebase
NET: Registered protocol family 2
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 0, 65536 bytes)
IP route cache hash table entries: 8192 (order: 0, 65536 bytes)
TCP established hash table entries: 32768 (order: 3, 524288 bytes)
TCP established hash table entries: 32768 (order: 3, 524288 bytes)
TCP bind hash table entries: 32768 (order: 3, 524288 bytes)
TCP bind hash table entries: 32768 (order: 3, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP reno registered
UDP hash table entries: 2048 (order: 0, 65536 bytes)
UDP hash table entries: 2048 (order: 0, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 1
Unpacking initramfs...
Unpacking initramfs...
Freeing initrd memory: 5696k freed
Freeing initrd memory: 5696k freed
rtasd: No event-scan on system
rtasd: No event-scan on system
rtas_flash: no firmware flash support
rtas_flash: no firmware flash support
IOMMU table initialized, virtual merging enabled
IOMMU table initialized, virtual merging enabled
vio 30000000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff,
table unavailable
vio 30000000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff,
table unavailable
HugeTLB registered 16 MB page size, pre-allocated 0 pages
HugeTLB registered 16 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
msgmni has been set to 1992
msgmni has been set to 1992
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler noop registered
io scheduler deadline registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
rpadlpar_io_init: partition not DLPAR capable
rpadlpar_io_init: partition not DLPAR capable
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <address@hidden>)
pmac_zilog: 0.6 (Benjamin Herrenschmidt <address@hidden>)
Fixed MDIO Bus: probed
Fixed MDIO Bus: probed
arcnet loaded.
arcnet loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
EDAC MC: Ver: 2.1.0
EDAC MC: Ver: 2.1.0
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
TCP cubic registered
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 10
NET: Registered protocol family 15
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
Registering the dns_resolver key type
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
turn off boot console udbg0
turn off boot console udbg0
registered taskstats version 1
/home/abuild/rpmbuild/BUILD/kernel-ppc64-3.2.0/linux-3.2/drivers/rtc/hctosys.c:
unable to open rtc device (rtc0)
Freeing unused kernel memory: 6272k freed
doing fast boot
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: address@hidden
SCSI subsystem initialized
alua: device handler registered
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
Creating device nodes with udev
udevd[78]: starting version 173
virtio-pci 0000:00:00.0: device not available (can't reserve [io
0x0000-0x001f])
virtio-pci: probe of 0000:00:00.0 failed with error -22
virtio-pci 0000:00:01.0: device not available (can't reserve [io
0x0000-0x003f])
virtio-pci: probe of 0000:00:01.0 failed with error -22
udevd[98]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl'
'/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or
directory
mount: devpts already mounted or /dev/pts busy
mount: according to mtab, devpts is already mounted on /dev/pts
Boot logging started on /dev/hvc0(/dev/console) at Mon Mar 26 09:55:36 2012
md: linear personality registered for level -1
Volume group "system" not found
Volume group "system" not found
resume device not found (ignoring)
Waiting for device /dev/mapper/system-root to appear: Reading all physical
volumes. This may take a while...
No volume groups found
Volume group "system" not found
Volume group "system" not found
Reading all physical volumes. This may take a while...
[...no virtio-pci block device found, so above scan loops...]
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/965327/+subscriptions
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [Bug 965327] Re: virtio-pci: can't reserve io 0x0000-0x001f,
Kenneth Salerno <=