[Qemu-devel] [PATCH 39/48] qmp: qmp-events.txt: put events in alphabetical order

[Luiz Capitulino]

Signed-off-by: Luiz Capitulino <address@hidden>
Reviewed-by: Eric Blake <address@hidden>
Acked-by: Gerd Hoffmann <address@hidden>
---
 QMP/qmp-events.txt | 266 ++++++++++++++++++++++++++---------------------------
 1 file changed, 130 insertions(+), 136 deletions(-)

diff --git a/QMP/qmp-events.txt b/QMP/qmp-events.txt
index 10f69d1..2389370 100644
--- a/QMP/qmp-events.txt
+++ b/QMP/qmp-events.txt
@@ -1,6 +1,23 @@
                    QEMU Monitor Protocol Events
                    ============================
 
+BALLOON_CHANGE
+--------------
+
+Emitted when the guest changes the actual BALLOON level. This
+value is equivalent to the 'actual' field return by the
+'query-balloon' command
+
+Data:
+
+- "actual": actual level of the guest memory balloon in bytes (json-number)
+
+Example:
+
+{ "event": "BALLOON_CHANGE",
+    "data": { "actual": 944766976 },
+    "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
+
 BLOCK_IO_ERROR
 --------------
 
@@ -26,6 +43,57 @@ Example:
 Note: If action is "stop", a STOP event will eventually follow the
 BLOCK_IO_ERROR event.
 
+BLOCK_JOB_CANCELLED
+-------------------
+
+Emitted when a block job has been cancelled.
+
+Data:
+
+- "type":     Job type ("stream" for image streaming, json-string)
+- "device":   Device name (json-string)
+- "len":      Maximum progress value (json-int)
+- "offset":   Current progress value (json-int)
+              On success this is equal to len.
+              On failure this is less than len.
+- "speed":    Rate limit, bytes per second (json-int)
+
+Example:
+
+{ "event": "BLOCK_JOB_CANCELLED",
+     "data": { "type": "stream", "device": "virtio-disk0",
+               "len": 10737418240, "offset": 134217728,
+               "speed": 0 },
+     "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
+
+BLOCK_JOB_COMPLETED
+-------------------
+
+Emitted when a block job has completed.
+
+Data:
+
+- "type":     Job type ("stream" for image streaming, json-string)
+- "device":   Device name (json-string)
+- "len":      Maximum progress value (json-int)
+- "offset":   Current progress value (json-int)
+              On success this is equal to len.
+              On failure this is less than len.
+- "speed":    Rate limit, bytes per second (json-int)
+- "error":    Error message (json-string, optional)
+              Only present on failure.  This field contains a human-readable
+              error message.  There are no semantics other than that streaming
+              has failed and clients should not try to interpret the error
+              string.
+
+Example:
+
+{ "event": "BLOCK_JOB_COMPLETED",
+     "data": { "type": "stream", "device": "virtio-disk0",
+               "len": 10737418240, "offset": 10737418240,
+               "speed": 0 },
+     "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
+
 DEVICE_TRAY_MOVED
 -----------------
 
@@ -98,6 +166,68 @@ Example:
 Note: If the command-line option "-no-shutdown" has been specified, a STOP
 event will eventually follow the SHUTDOWN event.
 
+SPICE_CONNECTED, SPICE_DISCONNECTED
+-----------------------------------
+
+Emitted when a SPICE client connects or disconnects.
+
+Data:
+
+- "server": Server information (json-object)
+  - "host": IP address (json-string)
+  - "port": port number (json-string)
+  - "family": address family (json-string, "ipv4" or "ipv6")
+- "client": Client information (json-object)
+  - "host": IP address (json-string)
+  - "port": port number (json-string)
+  - "family": address family (json-string, "ipv4" or "ipv6")
+
+Example:
+
+{ "timestamp": {"seconds": 1290688046, "microseconds": 388707},
+  "event": "SPICE_CONNECTED",
+  "data": {
+    "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
+    "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
+}}
+
+SPICE_INITIALIZED
+-----------------
+
+Emitted after initial handshake and authentication takes place (if any)
+and the SPICE channel is up'n'running
+
+Data:
+
+- "server": Server information (json-object)
+  - "host": IP address (json-string)
+  - "port": port number (json-string)
+  - "family": address family (json-string, "ipv4" or "ipv6")
+  - "auth": authentication method (json-string, optional)
+- "client": Client information (json-object)
+  - "host": IP address (json-string)
+  - "port": port number (json-string)
+  - "family": address family (json-string, "ipv4" or "ipv6")
+  - "connection-id": spice connection id.  All channels with the same id
+                     belong to the same spice session (json-int)
+  - "channel-type": channel type.  "1" is the main control channel, filter for
+                    this one if you want track spice sessions only (json-int)
+  - "channel-id": channel id.  Usually "0", might be different needed when
+                  multiple channels of the same type exist, such as multiple
+                  display channels in a multihead setup (json-int)
+  - "tls": whevener the channel is encrypted (json-bool)
+
+Example:
+
+{ "timestamp": {"seconds": 1290688046, "microseconds": 417172},
+  "event": "SPICE_INITIALIZED",
+  "data": {"server": {"auth": "spice", "port": "5921",
+                      "family": "ipv4", "host": "127.0.0.1"},
+           "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
+                      "connection-id": 1804289383, "host": "127.0.0.1",
+                      "channel-id": 0, "tls": true}
+}}
+
 STOP
 ----
 
@@ -200,70 +330,6 @@ Example:
                     "host": "127.0.0.1", "sasl_username": "luiz" } },
         "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
 
-SPICE_CONNECTED, SPICE_DISCONNECTED
------------------------------------
-
-Emitted when a SPICE client connects or disconnects.
-
-Data:
-
-- "server": Server information (json-object)
-  - "host": IP address (json-string)
-  - "port": port number (json-string)
-  - "family": address family (json-string, "ipv4" or "ipv6")
-- "client": Client information (json-object)
-  - "host": IP address (json-string)
-  - "port": port number (json-string)
-  - "family": address family (json-string, "ipv4" or "ipv6")
-
-Example:
-
-{ "timestamp": {"seconds": 1290688046, "microseconds": 388707},
-  "event": "SPICE_CONNECTED",
-  "data": {
-    "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
-    "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
-}}
-
-
-SPICE_INITIALIZED
------------------
-
-Emitted after initial handshake and authentication takes place (if any)
-and the SPICE channel is up'n'running
-
-Data:
-
-- "server": Server information (json-object)
-  - "host": IP address (json-string)
-  - "port": port number (json-string)
-  - "family": address family (json-string, "ipv4" or "ipv6")
-  - "auth": authentication method (json-string, optional)
-- "client": Client information (json-object)
-  - "host": IP address (json-string)
-  - "port": port number (json-string)
-  - "family": address family (json-string, "ipv4" or "ipv6")
-  - "connection-id": spice connection id.  All channels with the same id
-                     belong to the same spice session (json-int)
-  - "channel-type": channel type.  "1" is the main control channel, filter for
-                    this one if you want track spice sessions only (json-int)
-  - "channel-id": channel id.  Usually "0", might be different needed when
-                  multiple channels of the same type exist, such as multiple
-                  display channels in a multihead setup (json-int)
-  - "tls": whevener the channel is encrypted (json-bool)
-
-Example:
-
-{ "timestamp": {"seconds": 1290688046, "microseconds": 417172},
-  "event": "SPICE_INITIALIZED",
-  "data": {"server": {"auth": "spice", "port": "5921",
-                      "family": "ipv4", "host": "127.0.0.1"},
-           "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
-                      "connection-id": 1804289383, "host": "127.0.0.1",
-                      "channel-id": 0, "tls": true}
-}}
-
-
 WAKEUP
 ------
 
@@ -276,7 +342,6 @@ Example:
 { "event": "WATCHDOG",
      "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
 
-
 WATCHDOG
 --------
 
@@ -295,74 +360,3 @@ Example:
 
 Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is
 followed respectively by the RESET, SHUTDOWN, or STOP events.
-
-
-BLOCK_JOB_COMPLETED
--------------------
-
-Emitted when a block job has completed.
-
-Data:
-
-- "type":     Job type ("stream" for image streaming, json-string)
-- "device":   Device name (json-string)
-- "len":      Maximum progress value (json-int)
-- "offset":   Current progress value (json-int)
-              On success this is equal to len.
-              On failure this is less than len.
-- "speed":    Rate limit, bytes per second (json-int)
-- "error":    Error message (json-string, optional)
-              Only present on failure.  This field contains a human-readable
-              error message.  There are no semantics other than that streaming
-              has failed and clients should not try to interpret the error
-              string.
-
-Example:
-
-{ "event": "BLOCK_JOB_COMPLETED",
-     "data": { "type": "stream", "device": "virtio-disk0",
-               "len": 10737418240, "offset": 10737418240,
-               "speed": 0 },
-     "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-
-
-BLOCK_JOB_CANCELLED
--------------------
-
-Emitted when a block job has been cancelled.
-
-Data:
-
-- "type":     Job type ("stream" for image streaming, json-string)
-- "device":   Device name (json-string)
-- "len":      Maximum progress value (json-int)
-- "offset":   Current progress value (json-int)
-              On success this is equal to len.
-              On failure this is less than len.
-- "speed":    Rate limit, bytes per second (json-int)
-
-Example:
-
-{ "event": "BLOCK_JOB_CANCELLED",
-     "data": { "type": "stream", "device": "virtio-disk0",
-               "len": 10737418240, "offset": 134217728,
-               "speed": 0 },
-     "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-
-
-BALLOON_CHANGE
-----------
-
-Emitted when the guest changes the actual BALLOON level. This
-value is equivalent to the 'actual' field return by the
-'query-balloon' command
-
-Data:
-
-- "actual": actual level of the guest memory balloon in bytes (json-number)
-
-Example:
-
-{ "event": "BALLOON_CHANGE",
-    "data": { "actual": 944766976 },
-    "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
-- 
1.7.11.2.249.g31c7954.dirty