[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 3/5] QAPI: Introduce memchar-write QMP command
From: |
Luiz Capitulino |
Subject: |
Re: [Qemu-devel] [PATCH 3/5] QAPI: Introduce memchar-write QMP command |
Date: |
Wed, 19 Sep 2012 15:05:32 -0300 |
On Wed, 12 Sep 2012 19:57:24 +0800
Lei Li <address@hidden> wrote:
> Signed-off-by: Lei Li <address@hidden>
> ---
> hmp-commands.hx | 23 ++++++++++++++++++
> hmp.c | 19 +++++++++++++++
> hmp.h | 1 +
> qapi-schema.json | 69
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> qemu-char.c | 48 +++++++++++++++++++++++++++++++++++++
> qmp-commands.hx | 39 ++++++++++++++++++++++++++++++
> 6 files changed, 199 insertions(+), 0 deletions(-)
>
> diff --git a/hmp-commands.hx b/hmp-commands.hx
> index ed67e99..fe11926 100644
> --- a/hmp-commands.hx
> +++ b/hmp-commands.hx
> @@ -796,6 +796,29 @@ Inject an NMI on the given CPU (x86 only).
> ETEXI
>
> {
> + .name = "memchar_write",
> + .args_type = "chardev:s,size:i,data:s,format:s?,control:s?",
> + .params = "chardev size data [format] [control]",
> + .help = "Provide writing interface for CirMemCharDriver. Write"
> + "'data' to it with size 'size'",
> + .mhandler.cmd = hmp_memchar_write,
> + },
That's a too low level command for hmp. I'd actually consider dropping
it in favor of the console command, but if you really want to have this
then I suggest making the following changes:
o drop 'size', as this can be calculated from the user input string
o drop 'format', as base64 doesn't make much sense for hmp
o turn 'control' into a flag, like -b for block and -d for drop
Also applies for memchar_read.
> +
> +STEXI
> address@hidden memchar_write @var{chardev} @var{size} @var{data}
> address@hidden address@hidden
> address@hidden memchar_write
> +Provide writing interface for CirMemCharDriver. Write @var{data}
> +to cirmemchr char device with size @var{size}.
> +
> address@hidden is the format of the data write to CirMemCharDriver.
> +Support 'utf8' and 'base64', by default is 'utf8'.
> +
> address@hidden is option('block', 'drop') for read and write command
> +that specifies behavior when the queue is full/empty. By default is
> +'drop'. Note that the 'block' option is not supported now.
> +ETEXI
> +
> + {
> .name = "migrate",
> .args_type = "detach:-d,blk:-b,inc:-i,uri:s",
> .params = "[-d] [-b] [-i] uri",
> diff --git a/hmp.c b/hmp.c
> index ba6fbd3..97f5058 100644
> --- a/hmp.c
> +++ b/hmp.c
> @@ -671,6 +671,25 @@ void hmp_pmemsave(Monitor *mon, const QDict *qdict)
> hmp_handle_error(mon, &errp);
> }
>
> +void hmp_memchar_write(Monitor *mon, const QDict *qdict)
> +{
> + uint32_t size = qdict_get_int(qdict, "size");
> + const char *chardev = qdict_get_str(qdict, "chardev");
> + const char *data = qdict_get_str(qdict, "data");
> + int val = qdict_get_try_bool(qdict, "base64", 0);
> + enum DataFormat format;
> + int con = qdict_get_try_bool(qdict, "block", 0);
> + enum CongestionControl control;
> + Error *errp = NULL;
> +
> + format = val ? DATA_FORMAT_BASE64 : DATA_FORMAT_UTF8;
> + control = con ? CONGESTION_CONTROL_BLOCK : CONGESTION_CONTROL_DROP;
> + qmp_memchar_write(chardev, size, data, true, format,
> + true, control, &errp);
> +
> + hmp_handle_error(mon, &errp);
> +}
> +
> static void hmp_cont_cb(void *opaque, int err)
> {
> if (!err) {
> diff --git a/hmp.h b/hmp.h
> index 48b9c59..44b6463 100644
> --- a/hmp.h
> +++ b/hmp.h
> @@ -43,6 +43,7 @@ void hmp_system_powerdown(Monitor *mon, const QDict *qdict);
> void hmp_cpu(Monitor *mon, const QDict *qdict);
> void hmp_memsave(Monitor *mon, const QDict *qdict);
> void hmp_pmemsave(Monitor *mon, const QDict *qdict);
> +void hmp_memchar_write(Monitor *mon, const QDict *qdict);
> void hmp_cont(Monitor *mon, const QDict *qdict);
> void hmp_system_wakeup(Monitor *mon, const QDict *qdict);
> void hmp_inject_nmi(Monitor *mon, const QDict *qdict);
> diff --git a/qapi-schema.json b/qapi-schema.json
> index a9f465a..371239a 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -236,6 +236,75 @@
> { 'command': 'query-chardev', 'returns': ['ChardevInfo'] }
>
> ##
> +# @DataFormat:
> +#
> +# An enumeration of data format write to or read from
> +# memchardev. The default value would be utf8.
> +#
> +# @utf8: The data format is 'utf8'.
> +#
> +# @base64: The data format is 'base64'.
> +#
> +# Note: The data format start with 'utf8' and 'base64', will support
> +# other data format as well.
> +#
> +# Since: 1.3
> +##
> +{ 'enum': 'DataFormat'
> + 'data': [ 'utf8', 'base64' ] }
> +
> +##
> +# @CongestionControl
> +#
> +# An enumeration of options for the read and write command that
> +# specifies behavior when the queue is full/empty. The default
> +# option would be dropped.
> +#
> +# @drop: Would result in reads returning empty strings and writes
> +# dropping queued data.
> +#
> +# @block: Would make the session block until data was available
> +# or the queue had space available.
> +#
> +# Note: The option 'block' is not supported now due to the miss
> +# feature in qmp. Will add it later when we gain the necessary
> +# infrastructure enhancement.
That's not acceptable. We either, hold the inclusion of this series
until this is ready or we hardcode drop for now and add new commands
supporting @CongestionControl later.
> +#
> +# Since: 1.3
> +##
> +{'enum': 'CongestionControl'
> + 'data': [ 'drop', 'block' ] }
> +
> +##
> +# @memchar-write:
> +#
> +# Provide writing interface for CirMemCharDriver. Write data to cirmemchar
> +# char device.
> +#
> +# @chardev: the name of the cirmemchar char device.
> +#
> +# @size: the size to write in bytes.
> +#
> +# @data: the source data write to cirmemchar.
> +#
> +# @format: #optional the format of the data write to cirmemchar, by
> +# default is 'utf8'.
> +#
> +# @control: #optional options for read and write command that specifies
> +# behavior when the queue is full/empty.
> +#
> +# Returns: Nothing on success
> +# If @chardev is not a valid cirmemchr device, DeviceNotFound
> +# If an I/O error occurs while writing, IOError
This last line can be dropped.
> +#
> +# Since: 1.3
> +##
> +{ 'command': 'memchar-write',
> + 'data': {'chardev': 'str', 'size': 'int', 'data': 'str',
> + '*format': 'DataFormat',
I don't think format should be optional.
> + '*control': 'CongestionControl'} }
> +
> +##
> # @CommandInfo:
> #
> # Information about a QMP command
> diff --git a/qemu-char.c b/qemu-char.c
> index 6e84acc..be1d79a 100644
> --- a/qemu-char.c
> +++ b/qemu-char.c
> @@ -2700,6 +2700,54 @@ static CharDriverState
> *qemu_chr_open_cirmemchr(QemuOpts *opts)
> return chr;
> }
>
> +void qmp_memchar_write(const char *chardev, int64_t size,
> + const char *data, bool has_format,
> + enum DataFormat format, bool has_control,
> + enum CongestionControl control,
> + Error **errp)
> +{
> + CharDriverState *chr;
> + guchar *write_data;
> + int ret;
> + gsize write_count;
> +
> + chr = qemu_chr_find(chardev);
> +
> + if(!chr) {
> + error_set(errp, QERR_DEVICE_NOT_FOUND, chardev);
> + return;
> + }
> +
> + /* XXX: For the sync command as 'block', waiting for the qmp
> + * * to support necessary feature. Now just act as 'drop'. */
> + if (cirmem_chr_is_full(chr)) {
> + if (has_control && (control == CONGESTION_CONTROL_BLOCK)) {
> + g_free((char *)data);
> + return;
> + } else {
> + g_free((char *)data);
> + error_setg(errp, "Failed to write to memchr %s", chardev);
> + return;
> + }
> + }
Why do you free data above?
> +
> + write_count = (gsize)size;
> +
> + if (has_format && (format == DATA_FORMAT_BASE64)) {
> + write_data = g_base64_decode(data, &write_count);
> + } else {
> + write_data = (uint8_t *)data;
> + }
> +
> + ret = cirmem_chr_write(chr, write_data, write_count);
> + /* */
> + if (ret <= 0) {
> + error_setg(errp, "Failed to write to memchr %s", chardev);
> + }
> +
> + g_free(write_data);
> +}
> +
> QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename)
> {
> char host[65], port[33], width[8], height[8];
> diff --git a/qmp-commands.hx b/qmp-commands.hx
> index 6e21ddb..5a1b86b 100644
> --- a/qmp-commands.hx
> +++ b/qmp-commands.hx
> @@ -466,6 +466,45 @@ Note: inject-nmi fails when the guest doesn't support
> injecting.
> EQMP
>
> {
> + .name = "memchar-write",
> + .args_type = "chardev:s,size:i,data:s,format:s?,control:s?",
> + .mhandler.cmd_new = qmp_marshal_input_memchar_write,
> + },
> +
> +SQMP
> +memchar-write
> +-------------
> +
> +Provide writing interface for CirMemCharDriver. Write data to cirmemchar
> +char device.
> +
> +Arguments:
> +
> +- "chardev": the name of the char device, must be unique (json-string)
> +- "size": the memory size, in bytes (json-int)
> +- "data": the source data writed to cirmemchar (json-string)
> +- "format": the data format write to CirMemCharDriver, default is
> + utf8. (json-string, optional)
> + - Possible values: "utf8", "base64"
> +
> +- "control": options for read and write command that specifies
> + behavior when the queue is full/empty, default is
> + drop. (json-string, optional)
> + - Possible values: "drop", "block"
> +
> +Example:
> +
> +-> { "execute": "memchar-write",
> + "arguments": { "chardev": foo,
> + "size": 7,
> + "data": "abcdefg",
> + "format": "utf8",
> + "control": "drop" } }
> +<- { "return": {} }
> +
> +EQMP
> +
> + {
> .name = "xen-save-devices-state",
> .args_type = "filename:F",
> .mhandler.cmd_new = qmp_marshal_input_xen_save_devices_state,