Re: [Qemu-devel] [PATCH 2/2] hw: Add test device for unittests execution v2

[Jan Kiszka]

On 2012-10-04 19:31, Lucas Meneghel Rodrigues wrote:
> Add a test device which supports the kvmctl ioports,
> so one can run the KVM unittest suite.
> 
> Intended Usage:
> 
> qemu-system-x86_64 -device pc-testdev -serial stdio \
> -device isa-debugexit,iobase=0xf4,access-size=4 \
> -kernel /path/to/kvm/unittests/msr.flat
> 
> Where msr.flat is one of the KVM unittests, present on a
> separate repo,
> 
> git://git.kernel.org/pub/scm/virt/kvm/kvm-unit-tests.git
> 
> I still didn't figure out how to port register_ioport_read
> to the memory API, but hopefully we'll get there.
> 
> Changes from v2:
> 
> 1) Removed unused testdev member
> 2) Renamed device to a less generic name, pc-testdev
> 
> Initial changes from initial attempt:
> 
> 1) Removed port 0xf1, since now kvm-unit-tests use
>    serial
> 2) Removed exit code port 0xf4, since that can be
>    replaced by
> 
> -device isa-debugexit,iobase=0xf4,access-size=4
> 
> 3) Removed ram size port 0xd1, since guest memory
>    size can be retrieved from firmware, there's a
>    patch for kvm-unit-tests including an API to
>    retrieve that value.
> 
> CC: Paolo Bonzini <address@hidden>
> Signed-off-by: Gerd Hoffmann <address@hidden>
> Signed-off-by: Avi Kivity <address@hidden>
> Signed-off-by: Marcelo Tosatti <address@hidden>
> Signed-off-by: Lucas Meneghel Rodrigues <address@hidden>
> ---
>  hw/i386/Makefile.objs |   1 +
>  hw/pc-testdev.c       | 160 
> ++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 161 insertions(+)
>  create mode 100644 hw/pc-testdev.c
> 
> diff --git a/hw/i386/Makefile.objs b/hw/i386/Makefile.objs
> index b34c61c..3ef3b4a 100644
> --- a/hw/i386/Makefile.objs
> +++ b/hw/i386/Makefile.objs
> @@ -11,5 +11,6 @@ obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o
>  obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pt.o xen_pt_config_init.o 
> xen_pt_msi.o
>  obj-y += kvm/
>  obj-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
> +obj-y += pc-testdev.o
>  
>  obj-y := $(addprefix ../,$(obj-y))
> diff --git a/hw/pc-testdev.c b/hw/pc-testdev.c
> new file mode 100644
> index 0000000..0234adb
> --- /dev/null
> +++ b/hw/pc-testdev.c
> @@ -0,0 +1,160 @@
> +/*
> + * QEMU x86 ISA testdev
> + *
> + * Copyright (c) 2012 Avi Kivity, Gerd Hoffmann, Marcelo Tosatti
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
> + * of this software and associated documentation files (the "Software"), to 
> deal
> + * in the Software without restriction, including without limitation the 
> rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +/*
> + * This device is used to test KVM features specific to the x86 port, such
> + * as emulation, power management, interrupt routing, among others. It's 
> meant
> + * to be used like:
> + *
> + * qemu-system-x86_64 -device pc-testdev -serial stdio \
> + * -device isa-debugexit,iobase=0xf4,access-size=2 \
> + * -kernel /home/lmr/Code/virt-test.git/kvm/unittests/msr.flat
> + *
> + * Where msr.flat is one of the KVM unittests, present on a separate repo,
> + * git://git.kernel.org/pub/scm/virt/kvm/kvm-unit-tests.git
> +*/
> +
> +#include <sys/mman.h>
> +#include "hw.h"
> +#include "qdev.h"
> +#include "isa.h"
> +
> +struct testdev {

typedef struct PCTestdev { ... } PCTestdev;

> +    ISADevice dev;
> +    MemoryRegion iomem;
> +};
> +
> +#define TYPE_TESTDEV "pc-testdev"
> +#define TESTDEV(obj) \
> +     OBJECT_CHECK(struct testdev, (obj), TYPE_TESTDEV)
> +
> +static void test_device_irq_line(void *opaque, uint32_t addr, uint32_t data)
> +{
> +    struct testdev *dev = opaque;
> +
> +    qemu_set_irq(isa_get_irq(&dev->dev, addr - 0x2000), !!data);
> +}
> +
> +static uint32 test_device_ioport_data;

Embed into PCTestdev.

> +
> +static void test_device_ioport_write(void *opaque, uint32_t addr, uint32_t 
> data)
> +{
> +    test_device_ioport_data = data;
> +}
> +
> +static uint32_t test_device_ioport_read(void *opaque, uint32_t addr)
> +{
> +    return test_device_ioport_data;
> +}
> +
> +static void test_device_flush_page(void *opaque, uint32_t addr, uint32_t 
> data)
> +{
> +    target_phys_addr_t len = 4096;
> +    void *a = cpu_physical_memory_map(data & ~0xffful, &len, 0);
> +
> +    mprotect(a, 4096, PROT_NONE);
> +    mprotect(a, 4096, PROT_READ|PROT_WRITE);
> +    cpu_physical_memory_unmap(a, len, 0, 0);
> +}
> +
> +static char *iomem_buf;

Also this.

> +
> +static uint32_t test_iomem_readb(void *opaque, target_phys_addr_t addr)
> +{
> +    return iomem_buf[addr];
> +}
> +
> +static uint32_t test_iomem_readw(void *opaque, target_phys_addr_t addr)
> +{
> +    return *(uint16_t*)(iomem_buf + addr);
> +}
> +
> +static uint32_t test_iomem_readl(void *opaque, target_phys_addr_t addr)
> +{
> +    return *(uint32_t*)(iomem_buf + addr);
> +}
> +
> +static void test_iomem_writeb(void *opaque, target_phys_addr_t addr, 
> uint32_t val)
> +{
> +    iomem_buf[addr] = val;
> +}
> +
> +static void test_iomem_writew(void *opaque, target_phys_addr_t addr, 
> uint32_t val)
> +{
> +    *(uint16_t*)(iomem_buf + addr) = val;
> +}
> +
> +static void test_iomem_writel(void *opaque, target_phys_addr_t addr, 
> uint32_t val)
> +{
> +    *(uint32_t*)(iomem_buf + addr) = val;
> +}
> +
> +static const MemoryRegionOps test_iomem_ops = {
> +    .old_mmio = {
> +        .read = { test_iomem_readb, test_iomem_readw, test_iomem_readl, },
> +        .write = { test_iomem_writeb, test_iomem_writew, test_iomem_writel, 
> },
> +    },
> +    .endianness = DEVICE_LITTLE_ENDIAN,
> +};
> +
> +static int init_test_device(ISADevice *isa)
> +{
> +    struct testdev *dev = DO_UPCAST(struct testdev, dev, isa);
> +
> +    register_ioport_read(0xe0, 1, 1, test_device_ioport_read, dev);
> +    register_ioport_write(0xe0, 1, 1, test_device_ioport_write, dev);
> +    register_ioport_read(0xe0, 1, 2, test_device_ioport_read, dev);
> +    register_ioport_write(0xe0, 1, 2, test_device_ioport_write, dev);
> +    register_ioport_read(0xe0, 1, 4, test_device_ioport_read, dev);
> +    register_ioport_write(0xe0, 1, 4, test_device_ioport_write, dev);
> +    register_ioport_write(0xe4, 1, 4, test_device_flush_page, dev);
> +    register_ioport_write(0x2000, 24, 1, test_device_irq_line, NULL);
> +    iomem_buf = g_malloc0(0x10000);
> +    memory_region_init_io(&dev->iomem, &test_iomem_ops, dev,
> +                          "pc-testdev", 0x10000);
> +    memory_region_add_subregion(isa_address_space(&dev->dev), 0xff000000,
> +                                                  &dev->iomem);
> +    return 0;
> +}
> +
> +static void testdev_class_init(ObjectClass *klass, void *data)
> +{
> +    ISADeviceClass *k = ISA_DEVICE_CLASS(klass);
> +
> +    k->init = init_test_device;
> +}
> +
> +static TypeInfo testdev_info = {
> +    .name           = "pc-testdev",
> +    .parent         = TYPE_ISA_DEVICE,
> +    .instance_size  = sizeof(struct testdev),
> +    .class_init     = testdev_class_init,
> +};
> +
> +static void testdev_register_types(void)
> +{
> +    type_register_static(&testdev_info);
> +}
> +
> +type_init(testdev_register_types)
> 

For the ioport conversion I already sent you a link. Should be
straightforward, but also needs to be applied on Hervé's patch.

What about making the port addresses configurable at this chance, just
like we do in debugcon?

I think the rest is fine.

Jan

-- 
Siemens AG, Corporate Technology, CT RTC ITP SDP-DE
Corporate Competence Center Embedded Linux