qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [RFC PATCH v4 09/30] Implement dimm device abstraction


From: li guang
Subject: Re: [Qemu-devel] [RFC PATCH v4 09/30] Implement dimm device abstraction
Date: Tue, 26 Mar 2013 11:51:19 +0800

在 2012-12-18二的 13:41 +0100,Vasilis Liaskovitis写道:
> Each hotplug-able memory slot is a DimmDevice. All DimmDevices are attached
> to a new bus called DimmBus. This bus is introduced so that we no longer
> depend on hotplug-capability of main system bus (the main bus does not allow
> hotplugging). The DimmBus should be attached to a chipset Device (i440fx in 
> case
> of the pc)
> 
> A hot-add operation for a particular dimm:
> - creates a new DimmDevice and attaches it to the DimmBus
> - creates a new MemoryRegion of the given physical address offset, size and
> node proximity, and attaches it to main system memory as a sub_region.
> 
> Hotplug operations are done through normal device_add commands.
> Also add properties to DimmDevice.
> 
> v3->v4: Removed hot-remove functions. Will be offered in separate patches.
> 
> Signed-off-by: Vasilis Liaskovitis <address@hidden>
> ---
>  hw/Makefile.objs |    2 +-
>  hw/dimm.c        |  245 
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/dimm.h        |   89 ++++++++++++++++++++
>  3 files changed, 335 insertions(+), 1 deletions(-)
>  create mode 100644 hw/dimm.c
>  create mode 100644 hw/dimm.h
> 
> diff --git a/hw/Makefile.objs b/hw/Makefile.objs
> index d581d8d..51494c9 100644
> --- a/hw/Makefile.objs
> +++ b/hw/Makefile.objs
> @@ -29,7 +29,7 @@ common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
>  common-obj-$(CONFIG_PCSPK) += pcspk.o
>  common-obj-$(CONFIG_PCKBD) += pckbd.o
>  common-obj-$(CONFIG_FDC) += fdc.o
> -common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o smbus_ich9.o
> +common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o smbus_ich9.o 
> dimm.o
>  common-obj-$(CONFIG_APM) += pm_smbus.o apm.o
>  common-obj-$(CONFIG_DMA) += dma.o
>  common-obj-$(CONFIG_I82374) += i82374.o
> diff --git a/hw/dimm.c b/hw/dimm.c
> new file mode 100644
> index 0000000..e384952
> --- /dev/null
> +++ b/hw/dimm.c
> @@ -0,0 +1,245 @@
> +/*
> + * Dimm device for Memory Hotplug
> + *
> + * Copyright ProfitBricks GmbH 2012
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see 
> <http://www.gnu.org/licenses/>
> + */
> +
> +#include "trace.h"
> +#include "qdev.h"
> +#include "dimm.h"
> +#include <time.h>
> +#include "../exec-memory.h"
> +#include "qmp-commands.h"
> +
> +/* the following list is used to hold dimm config info before machine
> + * is initialized. After machine init, the list is not used anymore.*/
> +static DimmConfiglist dimmconfig_list =
> +       QTAILQ_HEAD_INITIALIZER(dimmconfig_list);
> +
> +/* the list of memory buses */
> +static QLIST_HEAD(, DimmBus) memory_buses;
> +
> +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent);
> +static char *dimmbus_get_fw_dev_path(DeviceState *dev);
> +
> +static Property dimm_properties[] = {
> +    DEFINE_PROP_UINT64("start", DimmDevice, start, 0),
> +    DEFINE_PROP_SIZE("size", DimmDevice, size, DEFAULT_DIMMSIZE),
> +    DEFINE_PROP_UINT32("node", DimmDevice, node, 0),
> +    DEFINE_PROP_BIT("populated", DimmDevice, populated, 0, false),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent)
> +{
> +}
> +
> +static char *dimmbus_get_fw_dev_path(DeviceState *dev)
> +{
> +    char path[40];
> +
> +    snprintf(path, sizeof(path), "%s", qdev_fw_name(dev));
> +    return strdup(path);
> +}
> +
> +static void dimm_bus_class_init(ObjectClass *klass, void *data)
> +{
> +    BusClass *k = BUS_CLASS(klass);
> +
> +    k->print_dev = dimmbus_dev_print;
> +    k->get_fw_dev_path = dimmbus_get_fw_dev_path;
> +}
> +
> +static void dimm_bus_initfn(Object *obj)
> +{
> +    DimmBus *bus = DIMM_BUS(obj);
> +    QTAILQ_INIT(&bus->dimmconfig_list);
> +    QTAILQ_INIT(&bus->dimmlist);
> +}
> +
> +static const TypeInfo dimm_bus_info = {
> +    .name = TYPE_DIMM_BUS,
> +    .parent = TYPE_BUS,
> +    .instance_size = sizeof(DimmBus),
> +    .instance_init = dimm_bus_initfn,
> +    .class_init = dimm_bus_class_init,
> +};
> +
> +DimmBus *dimm_bus_create(Object *parent, const char *name, uint32_t 
> max_dimms,
> +    dimm_calcoffset_fn pmc_set_offset)
> +{
> +    DimmBus *memory_bus;
> +    DimmConfig *dimm_cfg, *next_cfg;
> +    uint32_t num_dimms = 0;
> +
> +    memory_bus = g_malloc0(dimm_bus_info.instance_size);
> +    memory_bus->qbus.name = name ? g_strdup(name) : "membus.0";
> +    qbus_create_inplace(&memory_bus->qbus, TYPE_DIMM_BUS, DEVICE(parent),
> +                         name);
> +
> +    QTAILQ_FOREACH_SAFE(dimm_cfg, &dimmconfig_list, nextdimmcfg, next_cfg) {
> +        if (!strcmp(memory_bus->qbus.name, dimm_cfg->bus_name)) {
> +            if (max_dimms && (num_dimms == max_dimms)) {
> +                fprintf(stderr, "Bus %s can only accept %u number of 
> DIMMs\n",
> +                        name, max_dimms);
> +            }
> +            QTAILQ_REMOVE(&dimmconfig_list, dimm_cfg, nextdimmcfg);
> +            QTAILQ_INSERT_TAIL(&memory_bus->dimmconfig_list, dimm_cfg,
> +                    nextdimmcfg);
> +
> +            dimm_cfg->start = pmc_set_offset(DEVICE(parent), dimm_cfg->size);
> +            num_dimms++;
> +        }
> +    }
> +    QLIST_INSERT_HEAD(&memory_buses, memory_bus, next);
> +    return memory_bus;
> +}
> +
> +static void dimm_populate(DimmDevice *s)
> +{
> +    DeviceState *dev = (DeviceState *)s;
> +    MemoryRegion *new = NULL;
> +
> +    new = g_malloc(sizeof(MemoryRegion));
> +    memory_region_init_ram(new, dev->id, s->size);
> +    vmstate_register_ram_global(new);
> +    memory_region_add_subregion(get_system_memory(), s->start, new);
> +    s->populated = true;
> +    s->mr = new;

can't we simple just inc ref-count of mr when init memory_region, 
and dec ref-count of mr when destroy memory_region?
Sorry, it may be a bold idea :-)

> +}
> +
> +void dimm_config_create(char *id, uint64_t size, const char *bus, uint64_t 
> node,
> +        uint32_t dimm_idx, uint32_t populated)
> +{
> +    DimmConfig *dimm_cfg;
> +    dimm_cfg = (DimmConfig *) g_malloc0(sizeof(DimmConfig));
> +    dimm_cfg->name = strdup(id);
> +    dimm_cfg->bus_name = strdup(bus);
> +    dimm_cfg->idx = dimm_idx;
> +    dimm_cfg->start = 0;
> +    dimm_cfg->size = size;
> +    dimm_cfg->node = node;
> +    dimm_cfg->populated = populated;
> +
> +    QTAILQ_INSERT_TAIL(&dimmconfig_list, dimm_cfg, nextdimmcfg);
> +}
> +
> +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev)
> +{
> +    DimmBus *bus;
> +    QLIST_FOREACH(bus, &memory_buses, next) {
> +        assert(bus);
> +        bus->qbus.allow_hotplug = 1;
> +        bus->dimm_hotplug_qdev = qdev;
> +        bus->dimm_hotplug = hotplug;
> +    }
> +}
> +
> +static void dimm_plug_device(DimmDevice *slot)
> +{
> +    DimmBus *bus = DIMM_BUS(qdev_get_parent_bus(&slot->qdev));
> +
> +    dimm_populate(slot);
> +    if (bus->dimm_hotplug) {
> +        bus->dimm_hotplug(bus->dimm_hotplug_qdev, slot, 1);
> +    }
> +}
> +
> +static int dimm_unplug_device(DeviceState *qdev)
> +{
> +    return 1;
> +}
> +
> +static DimmConfig *dimmcfg_find_from_name(DimmBus *bus, const char *name)
> +{
> +    DimmConfig *slot;
> +
> +    QTAILQ_FOREACH(slot, &bus->dimmconfig_list, nextdimmcfg) {
> +        if (!strcmp(slot->name, name)) {
> +            return slot;
> +        }
> +    }
> +    return NULL;
> +}
> +
> +void dimm_setup_fwcfg_layout(uint64_t *fw_cfg_slots)
> +{
> +    DimmConfig *slot;
> +    DimmBus *bus;
> +
> +    QLIST_FOREACH(bus, &memory_buses, next) {
> +        QTAILQ_FOREACH(slot, &bus->dimmconfig_list, nextdimmcfg) {
> +            assert(slot->start);
> +            fw_cfg_slots[3 * slot->idx] = cpu_to_le64(slot->start);
> +            fw_cfg_slots[3 * slot->idx + 1] = cpu_to_le64(slot->size);
> +            fw_cfg_slots[3 * slot->idx + 2] = cpu_to_le64(slot->node);
> +        }
> +    }
> +}
> +
> +static int dimm_init(DeviceState *s)
> +{
> +    DimmBus *bus = DIMM_BUS(qdev_get_parent_bus(s));
> +    DimmDevice *slot;
> +    DimmConfig *slotcfg;
> +
> +    slot = DIMM(s);
> +    slot->mr = NULL;
> +
> +    slotcfg = dimmcfg_find_from_name(bus, s->id);
> +
> +    if (!slotcfg) {
> +        fprintf(stderr, "%s no config for slot %s found\n",
> +                __func__, s->id);
> +        return 1;
> +    }
> +
> +    slot->idx = slotcfg->idx;
> +    assert(slotcfg->start);
> +    slot->start = slotcfg->start;
> +    slot->size = slotcfg->size;
> +    slot->node = slotcfg->node;
> +
> +    QTAILQ_INSERT_TAIL(&bus->dimmlist, slot, nextdimm);
> +    dimm_plug_device(slot);
> +
> +    return 0;
> +}
> +
> +
> +static void dimm_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    dc->props = dimm_properties;
> +    dc->unplug = dimm_unplug_device;
> +    dc->init = dimm_init;
> +    dc->bus_type = TYPE_DIMM_BUS;
> +}
> +
> +static TypeInfo dimm_info = {
> +    .name          = TYPE_DIMM,
> +    .parent        = TYPE_DEVICE,
> +    .instance_size = sizeof(DimmDevice),
> +    .class_init    = dimm_class_init,
> +};
> +
> +static void dimm_register_types(void)
> +{
> +    type_register_static(&dimm_bus_info);
> +    type_register_static(&dimm_info);
> +}
> +
> +type_init(dimm_register_types)
> diff --git a/hw/dimm.h b/hw/dimm.h
> new file mode 100644
> index 0000000..75a6911
> --- /dev/null
> +++ b/hw/dimm.h
> @@ -0,0 +1,89 @@
> +#ifndef QEMU_DIMM_H
> +#define QEMU_DIMM_H
> +
> +#include "qemu-common.h"
> +#include "memory.h"
> +#include "sysbus.h"
> +#include "qapi-types.h"
> +#include "qemu-queue.h"
> +#include "cpus.h"
> +#define MAX_DIMMS 255
> +#define DIMM_BITMAP_BYTES ((MAX_DIMMS + 7) / 8)
> +#define DEFAULT_DIMMSIZE (1024*1024*1024)
> +
> +typedef enum {
> +    DIMM_REMOVE_SUCCESS = 0,
> +    DIMM_REMOVE_FAIL = 1,
> +    DIMM_ADD_SUCCESS = 2,
> +    DIMM_ADD_FAIL = 3
> +} dimm_hp_result_code;
> +
> +#define TYPE_DIMM "dimm"
> +#define DIMM(obj) \
> +    OBJECT_CHECK(DimmDevice, (obj), TYPE_DIMM)
> +#define DIMM_CLASS(klass) \
> +    OBJECT_CLASS_CHECK(DimmDeviceClass, (klass), TYPE_DIMM)
> +#define DIMM_GET_CLASS(obj) \
> +    OBJECT_GET_CLASS(DimmDeviceClass, (obj), TYPE_DIMM)
> +
> +typedef struct DimmDevice DimmDevice;
> +typedef QTAILQ_HEAD(DimmConfiglist, DimmConfig) DimmConfiglist;
> +
> +typedef struct DimmDeviceClass {
> +    DeviceClass parent_class;
> +
> +    int (*init)(DimmDevice *dev);
> +} DimmDeviceClass;
> +
> +struct DimmDevice {
> +    DeviceState qdev;
> +    uint32_t idx; /* index in memory hotplug register/bitmap */
> +    ram_addr_t start; /* starting physical address */
> +    ram_addr_t size;
> +    uint32_t node; /* numa node proximity */
> +    uint32_t populated; /* 1 means device has been hotplugged. Default is 0. 
> */
> +    MemoryRegion *mr; /* MemoryRegion for this slot. !NULL only if populated 
> */
> +    QTAILQ_ENTRY(DimmDevice) nextdimm;
> +};
> +
> +typedef struct DimmConfig {
> +    const char *name;
> +    uint32_t idx; /* index in linear memory hotplug bitmap */
> +    const char *bus_name;
> +    ram_addr_t start; /* starting physical address */
> +    ram_addr_t size;
> +    uint32_t node; /* numa node proximity */
> +    uint32_t populated; /* 1 means device has been hotplugged. Default is 0. 
> */
> +    QTAILQ_ENTRY(DimmConfig) nextdimmcfg;
> +} DimmConfig;
> +
> +typedef int (*dimm_hotplug_fn)(DeviceState *qdev, DimmDevice *dev, int add);
> +typedef hwaddr(*dimm_calcoffset_fn)(DeviceState *dev, uint64_t size);
> +
> +#define TYPE_DIMM_BUS "dimmbus"
> +#define DIMM_BUS(obj) OBJECT_CHECK(DimmBus, (obj), TYPE_DIMM_BUS)
> +
> +typedef struct DimmBus {
> +    BusState qbus;
> +    DeviceState *dimm_hotplug_qdev;
> +    dimm_hotplug_fn dimm_hotplug;
> +    DimmConfiglist dimmconfig_list;
> +    QTAILQ_HEAD(Dimmlist, DimmDevice) dimmlist;
> +    QLIST_ENTRY(DimmBus) next;
> +} DimmBus;
> +
> +struct dimm_hp_result {
> +    const char *dimmname;
> +    dimm_hp_result_code ret;
> +    QTAILQ_ENTRY(dimm_hp_result) next;
> +};
> +
> +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev);
> +void dimm_setup_fwcfg_layout(uint64_t *fw_cfg_slots);
> +int dimm_add(char *id);
> +DimmBus *dimm_bus_create(Object *parent, const char *name, uint32_t 
> max_dimms,
> +    dimm_calcoffset_fn pmc_set_offset);
> +void dimm_config_create(char *id, uint64_t size, const char *bus, uint64_t 
> node,
> +        uint32_t dimm_idx, uint32_t populated);
> +
> +#endif





reply via email to

[Prev in Thread] Current Thread [Next in Thread]