[Qemu-devel] [PULL 2/7] hw/cpu/a15mpcore: Correct default value for num-irq

[Peter Maydell]

The a15mpcore device claims that its default value for num-irq
is the number of interrupts used by the A15MP in the vexpress-a15
board. However that chip has 128 external interrupts, not 64.
Since there is only one A15 based model in QEMU currently, we
can fix this by simply changing the default value.

This error was causing recent (3.10) Linux kernels to print
warnings/backtraces when the number of interrupts reported
by the GIC was smaller than an interrupt number they wanted
to use.

Signed-off-by: Peter Maydell <address@hidden>
Message-id: address@hidden
---
 hw/cpu/a15mpcore.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/cpu/a15mpcore.c b/hw/cpu/a15mpcore.c
index 967b080..c736257 100644
--- a/hw/cpu/a15mpcore.c
+++ b/hw/cpu/a15mpcore.c
@@ -82,12 +82,12 @@ static int a15mp_priv_init(SysBusDevice *dev)
 static Property a15mp_priv_properties[] = {
     DEFINE_PROP_UINT32("num-cpu", A15MPPrivState, num_cpu, 1),
     /* The Cortex-A15MP may have anything from 0 to 224 external interrupt
-     * IRQ lines (with another 32 internal). We default to 64+32, which
+     * IRQ lines (with another 32 internal). We default to 128+32, which
      * is the number provided by the Cortex-A15MP test chip in the
      * Versatile Express A15 development board.
      * Other boards may differ and should set this property appropriately.
      */
-    DEFINE_PROP_UINT32("num-irq", A15MPPrivState, num_irq, 96),
+    DEFINE_PROP_UINT32("num-irq", A15MPPrivState, num_irq, 160),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
1.7.9.5