[Qemu-devel] [RFC PATCH v2 4/6] arm_gic: Support setting/getting binary point reg

[Christoffer Dall]

Add a binary_point field to the gic emulation structure and support
setting/getting this register now when we have it.  We don't actually
support interrupt grouping yet, oh well.

Signed-off-by: Christoffer Dall <address@hidden>

Changelog [v2]:
 - Renamed binary_point to bpr and abpr
 - Added GICC_ABPR read-as-write logic for TCG
---
 hw/intc/arm_gic.c        |   10 +++++++---
 hw/intc/arm_gic_common.c |    6 ++++--
 hw/intc/gic_internal.h   |    7 +++++++
 3 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index 6470d37..d1ddac1 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -578,8 +578,7 @@ static uint32_t gic_cpu_read(GICState *s, int cpu, int 
offset)
     case 0x04: /* Priority mask */
         return s->priority_mask[cpu];
     case 0x08: /* Binary Point */
-        /* ??? Not implemented.  */
-        return 0;
+        return s->bpr[cpu];
     case 0x0c: /* Acknowledge */
         value = gic_acknowledge_irq(s, cpu);
         value |= (GIC_SGI_SRC(value, cpu) & 0x7) << 10;
@@ -588,6 +587,8 @@ static uint32_t gic_cpu_read(GICState *s, int cpu, int 
offset)
         return s->running_priority[cpu];
     case 0x18: /* Highest Pending Interrupt */
         return s->current_pending[cpu];
+    case 0x1c: /* Aliased Binary Point */
+        return s->abpr[cpu];
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "gic_cpu_read: Bad offset %x\n", (int)offset);
@@ -606,10 +607,13 @@ static void gic_cpu_write(GICState *s, int cpu, int 
offset, uint32_t value)
         s->priority_mask[cpu] = (value & 0xff);
         break;
     case 0x08: /* Binary Point */
-        /* ??? Not implemented.  */
+        s->bpr[cpu] = (value & 0x7);
         break;
     case 0x10: /* End Of Interrupt */
         return gic_complete_irq(s, cpu, value & 0x3ff);
+    case 0x1c: /* Aliased Binary Point */
+        s->abpr[cpu] = (value & 0x7);
+        break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "gic_cpu_write: Bad offset %x\n", (int)offset);
diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index 0657e8b..5449d77 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -58,8 +58,8 @@ static const VMStateDescription vmstate_gic_irq_state = {
 
 static const VMStateDescription vmstate_gic = {
     .name = "arm_gic",
-    .version_id = 5,
-    .minimum_version_id = 5,
+    .version_id = 6,
+    .minimum_version_id = 6,
     .pre_save = gic_pre_save,
     .post_load = gic_post_load,
     .fields = (VMStateField[]) {
@@ -76,6 +76,8 @@ static const VMStateDescription vmstate_gic = {
         VMSTATE_UINT16_ARRAY(running_irq, GICState, NCPU),
         VMSTATE_UINT16_ARRAY(running_priority, GICState, NCPU),
         VMSTATE_UINT16_ARRAY(current_pending, GICState, NCPU),
+        VMSTATE_UINT8_ARRAY(bpr, GICState, NCPU),
+        VMSTATE_UINT8_ARRAY(abpr, GICState, NCPU),
         VMSTATE_END_OF_LIST()
     }
 };
diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h
index 5b53242..758b85a 100644
--- a/hw/intc/gic_internal.h
+++ b/hw/intc/gic_internal.h
@@ -92,6 +92,13 @@ typedef struct GICState {
     uint16_t running_priority[NCPU];
     uint16_t current_pending[NCPU];
 
+    /* We present the GICv2 without security extensions to a guest and
+     * therefore the guest can configure the GICC_CTLR to configure group 1
+     * binary point in the abpr.
+     */
+    uint8_t  bpr[NCPU];
+    uint8_t  abpr[NCPU];
+
     uint32_t num_cpu;
 
     MemoryRegion iomem; /* Distributor */
-- 
1.7.10.4