[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v18 04/10] block: use per-object cflags and libs
From: |
Paolo Bonzini |
Subject: |
[Qemu-devel] [PATCH v18 04/10] block: use per-object cflags and libs |
Date: |
Fri, 31 Jan 2014 15:49:07 +0100 |
From: Fam Zheng <address@hidden>
No longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.
This removes unwanted dependencies from libcacard.
Signed-off-by: Fam Zheng <address@hidden>
[Split from Fam's patch to enable modules. - Paolo]
Signed-off-by: Paolo Bonzini <address@hidden>
---
block/Makefile.objs | 13 ++++++++++++-
configure | 25 ++++++++++---------------
2 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/block/Makefile.objs b/block/Makefile.objs
index 4e8c91e..a1db63f 100644
--- a/block/Makefile.objs
+++ b/block/Makefile.objs
@@ -23,4 +23,15 @@ common-obj-y += commit.o
common-obj-y += mirror.o
common-obj-y += backup.o
-$(obj)/curl.o: QEMU_CFLAGS+=$(CURL_CFLAGS)
+iscsi.o-cflags := $(LIBISCSI_CFLAGS)
+iscsi.o-libs := $(LIBISCSI_LIBS)
+curl.o-cflags := $(CURL_CFLAGS)
+curl.o-libs := $(CURL_LIBS)
+rbd.o-cflags := $(RBD_CFLAGS)
+rbd.o-libs := $(RBD_LIBS)
+gluster.o-cflags := $(GLUSTERFS_CFLAGS)
+gluster.o-libs := $(GLUSTERFS_LIBS)
+ssh.o-cflags := $(LIBSSH2_CFLAGS)
+ssh.o-libs := $(LIBSSH2_LIBS)
+qcow.o-libs := -lz
+linux-aio.o-libs := -laio
diff --git a/configure b/configure
index afff201..bfc8636 100755
--- a/configure
+++ b/configure
@@ -2304,8 +2304,6 @@ EOF
curl_libs=`$curlconfig --libs 2>/dev/null`
if compile_prog "$curl_cflags" "$curl_libs" ; then
curl=yes
- libs_tools="$curl_libs $libs_tools"
- libs_softmmu="$curl_libs $libs_softmmu"
else
if test "$curl" = "yes" ; then
feature_not_found "curl"
@@ -2461,8 +2459,6 @@ EOF
rbd_libs="-lrbd -lrados"
if compile_prog "" "$rbd_libs" ; then
rbd=yes
- libs_tools="$rbd_libs $libs_tools"
- libs_softmmu="$rbd_libs $libs_softmmu"
else
if test "$rbd" = "yes" ; then
feature_not_found "rados block device"
@@ -2479,9 +2475,6 @@ if test "$libssh2" != "no" ; then
libssh2_cflags=`$pkg_config libssh2 --cflags`
libssh2_libs=`$pkg_config libssh2 --libs`
libssh2=yes
- libs_tools="$libssh2_libs $libs_tools"
- libs_softmmu="$libssh2_libs $libs_softmmu"
- QEMU_CFLAGS="$QEMU_CFLAGS $libssh2_cflags"
else
if test "$libssh2" = "yes" ; then
error_exit "libssh2 >= $min_libssh2_version required for
--enable-libssh2"
@@ -2527,8 +2520,6 @@ int main(void) { io_setup(0, NULL); io_set_eventfd(NULL,
0); eventfd(0, 0); retu
EOF
if compile_prog "" "-laio" ; then
linux_aio=yes
- libs_softmmu="$libs_softmmu -laio"
- libs_tools="$libs_tools -laio"
else
if test "$linux_aio" = "yes" ; then
feature_not_found "linux AIO"
@@ -2697,9 +2688,6 @@ if test "$glusterfs" != "no" ; then
glusterfs="yes"
glusterfs_cflags=`$pkg_config --cflags glusterfs-api`
glusterfs_libs=`$pkg_config --libs glusterfs-api`
- CFLAGS="$CFLAGS $glusterfs_cflags"
- libs_tools="$glusterfs_libs $libs_tools"
- libs_softmmu="$glusterfs_libs $libs_softmmu"
if $pkg_config --atleast-version=5 glusterfs-api; then
glusterfs_discard="yes"
fi
@@ -3070,11 +3058,9 @@ EOF
libiscsi="yes"
libiscsi_cflags=$($pkg_config --cflags libiscsi)
libiscsi_libs=$($pkg_config --libs libiscsi)
- CFLAGS="$CFLAGS $libiscsi_cflags"
- LIBS="$LIBS $libiscsi_libs"
elif compile_prog "" "-liscsi" ; then
libiscsi="yes"
- LIBS="$LIBS -liscsi"
+ libiscsi_libs="-liscsi"
else
if test "$libiscsi" = "yes" ; then
feature_not_found "libiscsi"
@@ -4072,6 +4058,7 @@ fi
if test "$curl" = "yes" ; then
echo "CONFIG_CURL=y" >> $config_host_mak
echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak
+ echo "CURL_LIBS=$curl_libs" >> $config_host_mak
fi
if test "$brlapi" = "yes" ; then
echo "CONFIG_BRLAPI=y" >> $config_host_mak
@@ -4164,6 +4151,8 @@ if test "$libiscsi" = "yes" ; then
if test "$libiscsi_version" = "1.4.0"; then
echo "CONFIG_LIBISCSI_1_4=y" >> $config_host_mak
fi
+ echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak
+ echo "LIBISCSI_LIBS=$libiscsi_libs" >> $config_host_mak
fi
if test "$seccomp" = "yes"; then
@@ -4185,6 +4174,8 @@ if test "$qom_cast_debug" = "yes" ; then
fi
if test "$rbd" = "yes" ; then
echo "CONFIG_RBD=y" >> $config_host_mak
+ echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+ echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
fi
echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
@@ -4228,6 +4219,8 @@ fi
if test "$glusterfs" = "yes" ; then
echo "CONFIG_GLUSTERFS=y" >> $config_host_mak
+ echo "GLUSTERFS_CFLAGS=$glusterfs_cflags" >> $config_host_mak
+ echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak
fi
if test "$glusterfs_discard" = "yes" ; then
@@ -4240,6 +4233,8 @@ fi
if test "$libssh2" = "yes" ; then
echo "CONFIG_LIBSSH2=y" >> $config_host_mak
+ echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
+ echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak
fi
if test "$virtio_blk_data_plane" = "yes" ; then
--
1.8.3.1
- [Qemu-devel] [PATCH v18 00/10] Shared library module support, Paolo Bonzini, 2014/01/31
- [Qemu-devel] [PATCH v18 02/10] rules.mak: fix $(obj) to a real relative path, Paolo Bonzini, 2014/01/31
- [Qemu-devel] [PATCH v18 01/10] util: Split out qemu_exec_dir from os_find_datadir, Paolo Bonzini, 2014/01/31
- [Qemu-devel] [PATCH v18 03/10] rules.mak: allow per object cflags and libs, Paolo Bonzini, 2014/01/31
- [Qemu-devel] [PATCH v18 04/10] block: use per-object cflags and libs,
Paolo Bonzini <=
- [Qemu-devel] [PATCH v18 05/10] darwin: do not use -mdynamic-no-pic, Paolo Bonzini, 2014/01/31
- [Qemu-devel] [PATCH v18 06/10] rules.mak: introduce DSO rules, Paolo Bonzini, 2014/01/31
- [Qemu-devel] [PATCH v18 07/10] module: implement module loading, Paolo Bonzini, 2014/01/31
- [Qemu-devel] [PATCH v18 08/10] Makefile: install modules with "make install", Paolo Bonzini, 2014/01/31
- [Qemu-devel] [PATCH v18 09/10] Makefile: introduce common-obj-m and block-obj-m for DSO, Paolo Bonzini, 2014/01/31
- [Qemu-devel] [PATCH v18 10/10] block: convert block drivers linked with libs to modules, Paolo Bonzini, 2014/01/31