[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 14/20] hw/acpi: move typeinfo to the file end
From: |
Michael S. Tsirkin |
Subject: |
[Qemu-devel] [PULL 14/20] hw/acpi: move typeinfo to the file end |
Date: |
Mon, 10 Feb 2014 18:48:33 +0200 |
From: Igor Mammedov <address@hidden>
do so to avoid not necessary forward declarations and
place typeinfo registration at the file end where it's
usually expected.
Signed-off-by: Igor Mammedov <address@hidden>
Reviewed-by: Michael S. Tsirkin <address@hidden>
Signed-off-by: Michael S. Tsirkin <address@hidden>
---
hw/acpi/piix4.c | 92 ++++++++++++++++++++++++++++-----------------------------
1 file changed, 46 insertions(+), 46 deletions(-)
diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
index 7a0efcb..0f45e11 100644
--- a/hw/acpi/piix4.c
+++ b/hw/acpi/piix4.c
@@ -466,52 +466,6 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t
smb_io_base,
return s->smb.smbus;
}
-static Property piix4_pm_properties[] = {
- DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
- DEFINE_PROP_UINT8(ACPI_PM_PROP_S3_DISABLED, PIIX4PMState, disable_s3, 0),
- DEFINE_PROP_UINT8(ACPI_PM_PROP_S4_DISABLED, PIIX4PMState, disable_s4, 0),
- DEFINE_PROP_UINT8(ACPI_PM_PROP_S4_VAL, PIIX4PMState, s4_val, 2),
- DEFINE_PROP_BOOL("acpi-pci-hotplug-with-bridge-support", PIIX4PMState,
- use_acpi_pci_hotplug, true),
- DEFINE_PROP_END_OF_LIST(),
-};
-
-static void piix4_pm_class_init(ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
- PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
-
- k->no_hotplug = 1;
- k->init = piix4_pm_initfn;
- k->config_write = pm_write_config;
- k->vendor_id = PCI_VENDOR_ID_INTEL;
- k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3;
- k->revision = 0x03;
- k->class_id = PCI_CLASS_BRIDGE_OTHER;
- dc->desc = "PM";
- dc->vmsd = &vmstate_acpi;
- dc->props = piix4_pm_properties;
- /*
- * Reason: part of PIIX4 southbridge, needs to be wired up,
- * e.g. by mips_malta_init()
- */
- dc->cannot_instantiate_with_device_add_yet = true;
-}
-
-static const TypeInfo piix4_pm_info = {
- .name = TYPE_PIIX4_PM,
- .parent = TYPE_PCI_DEVICE,
- .instance_size = sizeof(PIIX4PMState),
- .class_init = piix4_pm_class_init,
-};
-
-static void piix4_pm_register_types(void)
-{
- type_register_static(&piix4_pm_info);
-}
-
-type_init(piix4_pm_register_types)
-
static uint64_t gpe_readb(void *opaque, hwaddr addr, unsigned width)
{
PIIX4PMState *s = opaque;
@@ -566,3 +520,49 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion
*parent,
s->cpu_added_notifier.notify = piix4_cpu_added_req;
qemu_register_cpu_added_notifier(&s->cpu_added_notifier);
}
+
+static Property piix4_pm_properties[] = {
+ DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
+ DEFINE_PROP_UINT8(ACPI_PM_PROP_S3_DISABLED, PIIX4PMState, disable_s3, 0),
+ DEFINE_PROP_UINT8(ACPI_PM_PROP_S4_DISABLED, PIIX4PMState, disable_s4, 0),
+ DEFINE_PROP_UINT8(ACPI_PM_PROP_S4_VAL, PIIX4PMState, s4_val, 2),
+ DEFINE_PROP_BOOL("acpi-pci-hotplug-with-bridge-support", PIIX4PMState,
+ use_acpi_pci_hotplug, true),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void piix4_pm_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->no_hotplug = 1;
+ k->init = piix4_pm_initfn;
+ k->config_write = pm_write_config;
+ k->vendor_id = PCI_VENDOR_ID_INTEL;
+ k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3;
+ k->revision = 0x03;
+ k->class_id = PCI_CLASS_BRIDGE_OTHER;
+ dc->desc = "PM";
+ dc->vmsd = &vmstate_acpi;
+ dc->props = piix4_pm_properties;
+ /*
+ * Reason: part of PIIX4 southbridge, needs to be wired up,
+ * e.g. by mips_malta_init()
+ */
+ dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+static const TypeInfo piix4_pm_info = {
+ .name = TYPE_PIIX4_PM,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(PIIX4PMState),
+ .class_init = piix4_pm_class_init,
+};
+
+static void piix4_pm_register_types(void)
+{
+ type_register_static(&piix4_pm_info);
+}
+
+type_init(piix4_pm_register_types)
--
MST
- [Qemu-devel] [PULL 05/20] pcihp: remove unused AcpiPciHpPciStatus.device_present field, (continued)
- [Qemu-devel] [PULL 05/20] pcihp: remove unused AcpiPciHpPciStatus.device_present field, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 07/20] qtest: don't report signals if qtest driver enabled, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 08/20] pc_piix: enable legacy hotplug for Xen, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 10/20] loader: document that errno is set, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 09/20] pc.c: better error message on initrd sizing failure, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 11/20] define hotplug interface, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 12/20] qdev: add to BusState "hotplug-handler" link, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 13/20] qdev: add "hotpluggable" property to Device, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 14/20] hw/acpi: move typeinfo to the file end,
Michael S. Tsirkin <=
- [Qemu-devel] [PULL 15/20] qdev:pci: refactor PCIDevice to use generic "hotpluggable" property, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 16/20] acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 17/20] pci/shpc: convert SHPC hotplug to use hotplug-handler API, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 18/20] pci/pcie: convert PCIE hotplug to use hotplug-handler API, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 19/20] hw/pci: switch to a generic hotplug handling for PCIDevice, Michael S. Tsirkin, 2014/02/10
- [Qemu-devel] [PULL 20/20] ACPI: Remove commented-out code from HPET._CRS, Michael S. Tsirkin, 2014/02/10
- Re: [Qemu-devel] [PULL 00/20] acpi,pc,pci fixes and enhancements, Peter Maydell, 2014/02/13