[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 0/2] Add SP810 to Versatile Express boards
From: |
Fabian Aggeler |
Subject: |
[Qemu-devel] [PATCH v2 0/2] Add SP810 to Versatile Express boards |
Date: |
Tue, 5 Aug 2014 11:32:49 +0200 |
Hi,
The Versatile Express emulation in QEMU currently does not
have a model of the SP810 used in real hardware. The registers
provided by this System Controller can be used to set the
frequency of the SP804 timers. On newer releases of the board
the SP804 is set to 32kHz by default and has to be increased
by writing to the SCCTRL. See:
http://lists.infradead.org/pipermail/linux-arm-kernel/2011-January/038696.html
Since QEMU sets the SP804 timers to 1MHz by default this should
be reflected in the SCCTRL register. These two patches add a
model of the SP804 to the vexpress-boards and sets the SCCTRL
register so that software that queries this register behaves
as expected.
Feedback is greatly appreciated!
Best,
Fabian
v1 -> v2:
* TIMERENXSEL prefixed with register name
* removed casts
* created header file
v1: https://lists.nongnu.org/archive/html/qemu-devel/2014-07/msg02572.html
Fabian Aggeler (2):
hw/misc/arm_sp810: Create SP810 device
hw/arm/vexpress: add SP810 to the vexpress
default-configs/arm-softmmu.mak | 1 +
hw/arm/vexpress.c | 6 ++-
hw/misc/Makefile.objs | 1 +
hw/misc/arm_sp810.c | 98 +++++++++++++++++++++++++++++++++++++++++
include/hw/misc/arm_sp810.h | 85 +++++++++++++++++++++++++++++++++++
5 files changed, 190 insertions(+), 1 deletion(-)
create mode 100644 hw/misc/arm_sp810.c
create mode 100644 include/hw/misc/arm_sp810.h
--
1.8.3.2