[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob
From: |
Aravinda Prasad |
Subject: |
Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob |
Date: |
Tue, 02 Sep 2014 11:26:35 +0530 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130510 Thunderbird/17.0.6 |
On Tuesday 02 September 2014 11:19 AM, Alexey Kardashevskiy wrote:
> On 09/02/2014 03:25 PM, Aravinda Prasad wrote:
>>
>>
>> On Tuesday 02 September 2014 09:39 AM, Alexey Kardashevskiy wrote:
>>> On 09/01/2014 09:23 PM, Aravinda Prasad wrote:
>>>>
>>>>
>>>> On Monday 01 September 2014 01:16 PM, Alexey Kardashevskiy wrote:
>>>>> On 08/25/2014 11:45 PM, Aravinda Prasad wrote:
>>>>>> Extend rtas-blob to accommodate error log. Error log
>>>>>> structure is saved in rtas space upon a machine check
>>>>>> exception.
>>>>>>
>>>>>> Signed-off-by: Aravinda Prasad <address@hidden>
>>>>>> ---
>>>>>> hw/ppc/spapr.c | 13 ++++++++++---
>>>>>> hw/ppc/spapr_rtas.c | 4 ++--
>>>>>> include/hw/ppc/spapr.h | 2 +-
>>>>>> pc-bios/spapr-rtas/spapr-rtas.S | 12 ++++++++++++
>>>>>> 4 files changed, 25 insertions(+), 6 deletions(-)
>>>>>>
>>>>>> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
>>>>>> index d01978f..1120988 100644
>>>>>> --- a/hw/ppc/spapr.c
>>>>>> +++ b/hw/ppc/spapr.c
>>>>>> @@ -85,6 +85,12 @@
>>>>>>
>>>>>> #define HTAB_SIZE(spapr) (1ULL << ((spapr)->htab_shift))
>>>>>>
>>>>>> +/*
>>>>>> + * The rtas-entry-offset should match the value specified in
>>>>>> + * spapr-rtas.S
>>>>>> + */
>>>>>> +#define RTAS_ENTRY_OFFSET 0x1000
>>>>>> +
>>>>>> typedef struct sPAPRMachineState sPAPRMachineState;
>>>>>>
>>>>>> #define TYPE_SPAPR_MACHINE "spapr-machine"
>>>>>> @@ -670,7 +676,8 @@ static int spapr_populate_memory(sPAPREnvironment
>>>>>> *spapr, void *fdt)
>>>>>> static void spapr_finalize_fdt(sPAPREnvironment *spapr,
>>>>>> hwaddr fdt_addr,
>>>>>> hwaddr rtas_addr,
>>>>>> - hwaddr rtas_size)
>>>>>> + hwaddr rtas_size,
>>>>>> + hwaddr rtas_entry)
>>>>>> {
>>>>>> int ret, i;
>>>>>> size_t cb = 0;
>>>>>> @@ -705,7 +712,7 @@ static void spapr_finalize_fdt(sPAPREnvironment
>>>>>> *spapr,
>>>>>> }
>>>>>>
>>>>>> /* RTAS */
>>>>>> - ret = spapr_rtas_device_tree_setup(fdt, rtas_addr, rtas_size);
>>>>>> + ret = spapr_rtas_device_tree_setup(fdt, rtas_addr, rtas_size,
>>>>>> rtas_entry);
>>>>>> if (ret < 0) {
>>>>>> fprintf(stderr, "Couldn't set up RTAS device tree
>>>>>> properties\n");
>>>>>> }
>>>>>> @@ -808,7 +815,7 @@ static void ppc_spapr_reset(void)
>>>>>>
>>>>>> /* Load the fdt */
>>>>>> spapr_finalize_fdt(spapr, spapr->fdt_addr, spapr->rtas_addr,
>>>>>> - spapr->rtas_size);
>>>>>> + spapr->rtas_size, spapr->rtas_addr +
>>>>>> RTAS_ENTRY_OFFSET);
>>>>>>
>>>>>> /* Set up the entry state */
>>>>>> first_ppc_cpu = POWERPC_CPU(first_cpu);
>>>>>> diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c
>>>>>> index 9ba1ba6..02ddbf9 100644
>>>>>> --- a/hw/ppc/spapr_rtas.c
>>>>>> +++ b/hw/ppc/spapr_rtas.c
>>>>>> @@ -328,7 +328,7 @@ void spapr_rtas_register(int token, const char
>>>>>> *name, spapr_rtas_fn fn)
>>>>>> }
>>>>>>
>>>>>> int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
>>>>>> - hwaddr rtas_size)
>>>>>> + hwaddr rtas_size, hwaddr rtas_entry)
>>>>>> {
>>>>>> int ret;
>>>>>> int i;
>>>>>> @@ -349,7 +349,7 @@ int spapr_rtas_device_tree_setup(void *fdt, hwaddr
>>>>>> rtas_addr,
>>>>>> }
>>>>>>
>>>>>> ret = qemu_fdt_setprop_cell(fdt, "/rtas", "linux,rtas-entry",
>>>>>> - rtas_addr);
>>>>>> + rtas_entry);
>>>>>> if (ret < 0) {
>>>>>> fprintf(stderr, "Couldn't add linux,rtas-entry property: %s\n",
>>>>>> fdt_strerror(ret));
>>>>>> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
>>>>>> index bbba51a..dedfa67 100644
>>>>>> --- a/include/hw/ppc/spapr.h
>>>>>> +++ b/include/hw/ppc/spapr.h
>>>>>> @@ -436,7 +436,7 @@ target_ulong spapr_rtas_call(PowerPCCPU *cpu,
>>>>>> sPAPREnvironment *spapr,
>>>>>> uint32_t token, uint32_t nargs,
>>>>>> target_ulong args,
>>>>>> uint32_t nret, target_ulong rets);
>>>>>> int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
>>>>>> - hwaddr rtas_size);
>>>>>> + hwaddr rtas_size, hwaddr rtas_entry);
>>>>>>
>>>>>> #define SPAPR_TCE_PAGE_SHIFT 12
>>>>>> #define SPAPR_TCE_PAGE_SIZE (1ULL << SPAPR_TCE_PAGE_SHIFT)
>>>>>> diff --git a/pc-bios/spapr-rtas/spapr-rtas.S
>>>>>> b/pc-bios/spapr-rtas/spapr-rtas.S
>>>>>> index 903bec2..8c9b17e 100644
>>>>>> --- a/pc-bios/spapr-rtas/spapr-rtas.S
>>>>>> +++ b/pc-bios/spapr-rtas/spapr-rtas.S
>>>>>> @@ -30,6 +30,18 @@
>>>>>>
>>>>>> .globl _start
>>>>>> _start:
>>>>>> + /*
>>>>>> + * Reserve space for error log in RTAS blob.
>>>>>> + *
>>>>>> + * Either we can reserve initial bytes for error log followed by
>>>>>> + * rtas-entry or space can be reserved after rtas-entry. I
>>>>>> prefer
>>>>>> + * former, as we already have rtas-base and rtas-entry
>>>>>> (currently
>>>>>> + * both pointing to rtas-base) defined in qemu and we can update
>>>>>> + * rtas-entry to point to an offset from rtas-base. This avoids
>>>>>> + * unnecessary definition of rtas-error-offset while keeping
>>>>>> + * rtas-entry redundant.
>>>>>> + */
>>>>>> + . = 0x1000
>>>>>
>>>>>
>>>>> Why not this (and not changing spapr-rtas.S)?
>>>>>
>>>>> --- a/hw/ppc/spapr.c
>>>>> +++ b/hw/ppc/spapr.c
>>>>> @@ -875,7 +875,8 @@ static void ppc_spapr_reset(void)
>>>>> spapr->rtas_size);
>>>>>
>>>>> /* Copy RTAS over */
>>>>> - cpu_physical_memory_write(spapr->rtas_addr, spapr->rtas_blob,
>>>>> + cpu_physical_memory_write(spapr->rtas_addr + RTAS_ENTRY_OFFSET,
>>>>> + spapr->rtas_blob,
>>>>> spapr->rtas_size);
>>>>
>>>> This is possible, however requires suitable adjustment to make sure
>>>> spapr->rtas_addr has enough space allocated.
>>>
>>>
>>> How is adding RTAS_ENTRY_OFFSET not enough to make sure that is has enough
>>> space? QEMU copies RTAS to guest memory, QEMU makes up rtas_addr/entry
>>> properties.
>>
>> QEMU adds spapr-rtas.bin as a rom, with rom->addr set to
>> spapr->rtas_addr, rom->datasize set to 20 bytes (the size of current
>> spapr-rtas.bin) and contents of spapr-rtas.bin read into rom->data
>> (malloc-ed region).
>>
>> I think, access to spapr->rtas_addr is mapped to this rom. Hence it is
>> necessary to have rtas_addr and rtas_size consistent with the Rom
>> struct. If we use spapr->rtas_addr + RTAS_ENTRY_OFFSET then we are
>> trying to access an invalid offset in rom region.
>
>
> What is that "rom" struct you are referring to? In upstream QEMU, I can
> only see:
>
> ppc_spapr_init():
> [...]
> filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, "spapr-rtas.bin")
In ppc_spapr_init() just after qemu_find_file() we have:
spapr->rtas_size = load_image_targphys(filename, spapr->rtas_addr, ...);
load_image_targphys() -> rom_add_file_fixed() -> rom_add_file(), where
Rom is initialized.
> spapr->rtas_size = get_image_size(filename);
> spapr->rtas_blob = g_malloc(spapr->rtas_size);
> if (load_image_size(filename, spapr->rtas_blob, spapr->rtas_size) < 0) {
> [...]
>
> and then
>
> ppc_spapr_reset():
> [...]
> spapr->rtas_addr = rtas_limit - RTAS_MAX_SIZE
> [...]
> cpu_physical_memory_write(spapr->rtas_addr, spapr->rtas_blob,
> spapr->rtas_size);
> [...]
>
>
>
>>
>>
>>>
>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> mr 4,3
>>>>>> lis 3,address@hidden
>>>>>> ori 3,3,address@hidden
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>
--
Regards,
Aravinda
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Alexey Kardashevskiy, 2014/09/01
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Aravinda Prasad, 2014/09/01
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Alexey Kardashevskiy, 2014/09/02
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Aravinda Prasad, 2014/09/02
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Alexey Kardashevskiy, 2014/09/02
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob,
Aravinda Prasad <=
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Alexey Kardashevskiy, 2014/09/02
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Aravinda Prasad, 2014/09/02
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Alexey Kardashevskiy, 2014/09/02
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Aravinda Prasad, 2014/09/02
- Re: [Qemu-devel] [PATCH 1/5] target-ppc: Extend rtas-blob, Alexey Kardashevskiy, 2014/09/02