qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v13 03/14] qcow2: Optimize bdrv_make_empty()


From: Max Reitz
Subject: Re: [Qemu-devel] [PATCH v13 03/14] qcow2: Optimize bdrv_make_empty()
Date: Thu, 23 Oct 2014 09:46:43 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.2.0

On 2014-10-22 at 20:35, Kevin Wolf wrote:
Am 22.10.2014 um 14:51 hat Max Reitz geschrieben:
bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.

If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).

Signed-off-by: Max Reitz <address@hidden>
Hey, this feels actually reviewable this time. :-)

I'm still unsure which version I like more. If it wasn't for the math, I'd prefer the other version.

diff --git a/block/blkdebug.c b/block/blkdebug.c
index e046b92..862d93b 100644
--- a/block/blkdebug.c
+++ b/block/blkdebug.c
@@ -195,6 +195,8 @@ static const char *event_names[BLKDBG_EVENT_MAX] = {
      [BLKDBG_PWRITEV]                        = "pwritev",
      [BLKDBG_PWRITEV_ZERO]                   = "pwritev_zero",
      [BLKDBG_PWRITEV_DONE]                   = "pwritev_done",
+
+    [BLKDBG_EMPTY_IMAGE_PREPARE]            = "empty_image_prepare",
  };
static int get_event_by_name(const char *name, BlkDebugEvent *event)
diff --git a/block/qcow2.c b/block/qcow2.c
index 1ef3a5f..16dece2 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -2232,24 +2232,137 @@ fail:
static int qcow2_make_empty(BlockDriverState *bs)
  {
+    BDRVQcowState *s = bs->opaque;
      int ret = 0;
-    uint64_t start_sector;
-    int sector_step = INT_MAX / BDRV_SECTOR_SIZE;
- for (start_sector = 0; start_sector < bs->total_sectors;
-         start_sector += sector_step)
-    {
-        /* As this function is generally used after committing an external
-         * snapshot, QCOW2_DISCARD_SNAPSHOT seems appropriate. Also, the
-         * default action for this kind of discard is to pass the discard,
-         * which will ideally result in an actually smaller image file, as
-         * is probably desired. */
-        ret = qcow2_discard_clusters(bs, start_sector * BDRV_SECTOR_SIZE,
-                                     MIN(sector_step,
-                                         bs->total_sectors - start_sector),
-                                     QCOW2_DISCARD_SNAPSHOT, true);
+    if (s->snapshots || s->qcow_version < 3) {
+        uint64_t start_sector;
+        int sector_step = INT_MAX / BDRV_SECTOR_SIZE;
+
+        /* If there are snapshots, every active cluster has to be discarded; 
and
+         * because compat=0.10 does not support setting the dirty flag, we have
+         * to use this fallback there as well */
+
+        for (start_sector = 0; start_sector < bs->total_sectors;
+             start_sector += sector_step)
+        {
+            /* As this function is generally used after committing an external
+             * snapshot, QCOW2_DISCARD_SNAPSHOT seems appropriate. Also, the
+             * default action for this kind of discard is to pass the discard,
+             * which will ideally result in an actually smaller image file, as
+             * is probably desired. */
+            ret = qcow2_discard_clusters(bs, start_sector * BDRV_SECTOR_SIZE,
+                                         MIN(sector_step,
+                                             bs->total_sectors - start_sector),
+                                         QCOW2_DISCARD_SNAPSHOT, true);
+            if (ret < 0) {
+                break;
+            }
+        }
My first though was to add a return here, so the indentation level for
the rest is one less. Probably a matter of taste, though.

I'd rather put the second branch into an own function.

+    } else {
+        int l1_clusters;
+        int64_t offset;
+        uint64_t *new_reftable;
+        uint64_t rt_entry;
+        struct {
+            uint64_t l1_offset;
+            uint64_t reftable_offset;
+            uint32_t reftable_clusters;
+        } QEMU_PACKED l1_ofs_rt_ofs_cls;
+
+        ret = qcow2_cache_empty(bs, s->l2_table_cache);
          if (ret < 0) {
-            break;
+            return ret;
+        }
+
+        ret = qcow2_cache_empty(bs, s->refcount_block_cache);
+        if (ret < 0) {
+            return ret;
+        }
+
+        /* Refcounts will be broken utterly */
+        ret = qcow2_mark_dirty(bs);
+        if (ret < 0) {
+            return ret;
+        }
+
+        l1_clusters = DIV_ROUND_UP(s->l1_size,
+                                   s->cluster_size / sizeof(uint64_t));
+        new_reftable = g_try_new0(uint64_t, s->cluster_size / 
sizeof(uint64_t));
+        if (!new_reftable) {
+            return -ENOMEM;
+        }
+
+        BLKDBG_EVENT(bs->file, BLKDBG_EMPTY_IMAGE_PREPARE);
Until here, the failure cases are trivially okay. The worst thing that
could happen is that the image is needlessly marked as dirty.

+        /* Overwrite enough clusters at the beginning of the sectors to place
+         * the refcount table, a refcount block and the L1 table in; this may
+         * overwrite parts of the existing refcount and L1 table, which is not
+         * an issue because the dirty flag is set, complete data loss is in 
fact
+         * desired and partial data loss is consequently fine as well */
+        ret = bdrv_write_zeroes(bs->file, s->cluster_size / BDRV_SECTOR_SIZE,
+                                (2 + l1_clusters) * s->cluster_size /
+                                BDRV_SECTOR_SIZE, 0);
If we crash at this point, we're _not_ okay any more. --verbose follows:

On disk, we may have overwritten a refcount table or a refcount block
with zeros. This is fine, we have the dirty flag set, so destroying any
refcounting structure does no harm.

We may also have overwritten an L1 or L2 table. As the commit correctly
explains, this is doing partially what the function is supposed to do
for the whole image. Affected data clusters are now read from the
backing file. Good.

However, we may also have overwritten data clusters that are still
accessible using an L1/L2 table that hasn't been hit by this write
operation. We're reading corrupted (zeroed out) data now instead of
going to the backing file. Bug!

Oh, right, I forgot about the L1 table not always being at the start of the file.

In my original suggestion I had an item where the L1 table was zeroed
out first before the start of the image is zeroed. This would have
avoided the bug.

+        if (ret < 0) {
+            g_free(new_reftable);
+            return ret;
+        }
If we fail here (without crashing), the first clusters could be in their
original state or partially zeroed. Assuming that you fixed the above
bug, the on-disk state would be okay if we opened the image now because
the dirty flag would trigger an image repair; but we don't get the
repair when taking this failure path and we may have zeroed a refcount
table/block. This is probably a problem and we may have to make the BDS
unusable.

The in-memory state of the L1 table is hopefully zeroed out, so it's
consistent with what is on disk.

The in-memory state of the refcount table looks like it's not in sync
with the on-disk state. Note that while the dirty flag allows that the
on-disk state can be anything, the in-memory state is what we keep using
after a failure. The in-memory state isn't accurate at this point, but
we only create leaks. Lots of them, because we zeroed the L1 table, but
that's good enough. If refcounts are updated later, the old offsets
should still be valid.

If we set at least parts of the in-memory reftable to zero, everything probably breaks. Try to allocate a new cluster while the beginning of the reftable is zero. So we cannot take the on-disk reftable into memory.

Doing it the other way around, writing the in-memory reftable to disk on error won't work either. The refblocks may have been zeroed out, so we have exactly the same problem.

Therefore, to make the BDS usable after error, we have to (in the error path) read the on-disk reftable into memory, call the qcow2 repair function and hope for the best.

Or, you know, we could go back to v11 which had my other version of this patch which always kept everything consistent. :-P

All of the following code shouldn't change what a guest is seeing, but
only fix up the refcounts.

+        BLKDBG_EVENT(bs->file, BLKDBG_L1_UPDATE);
+        BLKDBG_EVENT(bs->file, BLKDBG_REFTABLE_UPDATE);
+
+        /* "Create" an empty reftable (one cluster) directly after the image
+         * header and an empty L1 table three clusters after the image header;
+         * the cluster between those two will be used as the first refblock */
+        cpu_to_be64w(&l1_ofs_rt_ofs_cls.l1_offset, 3 * s->cluster_size);
+        cpu_to_be64w(&l1_ofs_rt_ofs_cls.reftable_offset, s->cluster_size);
+        cpu_to_be32w(&l1_ofs_rt_ofs_cls.reftable_clusters, 1);
+        ret = bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, l1_table_offset),
+                               &l1_ofs_rt_ofs_cls, sizeof(l1_ofs_rt_ofs_cls));
If we crash here, we have a new, but still an all-zero L1 table, which
ensures that the guest sees the right thing. We also get a new refcount
table, which is invalid anyway. It is completely zeroed out, image
repair should be able to cope with it.

It now is, yes.

+        if (ret < 0) {
+            g_free(new_reftable);
+            return ret;
+        }
Failure without a crash. It should be safe to assume that either the
whole header has been updated (and the flush failed) or it's in its old
state.

Probably the same problem as above with potentially overwritten refcount
blocks while we don't get a repair on this failure path. Without
accurate in-memory refcounts, we can't keep using the BDS.

+        s->l1_table_offset = 3 * s->cluster_size;
+        memset(s->l1_table, 0, s->l1_size * sizeof(uint64_t));
This line has been moved to above by the assumed L1 fix.

+        s->refcount_table_offset = s->cluster_size;
+        s->refcount_table_size   = s->cluster_size / sizeof(uint64_t);
+
+        g_free(s->refcount_table);
+        s->refcount_table = new_reftable;
+
+        BLKDBG_EVENT(bs->file, BLKDBG_REFBLOCK_ALLOC);
+
+        /* Enter the first refblock into the reftable */
+        rt_entry = cpu_to_be64(2 * s->cluster_size);
+        ret = bdrv_pwrite_sync(bs->file, s->cluster_size,
+                               &rt_entry, sizeof(rt_entry));
On-disk status: L1 table empty, refcount table has a refblock, but still
no references. Dirty flag ensures we're safe.

+        if (ret < 0) {
+            return ret;
+        }
Failure path without crash: s->refcount_table_offset/size have been
updated, but we still don't have accurate in-memory information. Still
can't keep using the BDS after failing here.

+        s->refcount_table[0] = 2 * s->cluster_size;
+
+        ret = bdrv_truncate(bs->file, (3 + l1_clusters) * s->cluster_size);
+        if (ret < 0) {
+            return ret;
+        }
Nothing interesting happens here (except that this is the heart of the
functionality :-)). The on-disk state didn't reference any of the
truncated clusters any more. The in-memory state isn't fixed yet.

+        s->free_cluster_index = 0;
+        offset = qcow2_alloc_clusters(bs, 3 * s->cluster_size +
+                                      s->l1_size * sizeof(uint64_t));
+        if (offset < 0) {
+            return offset;
BDS still unusable here.

+        } else if (offset > 0) {
+            error_report("First cluster in emptied image is in use");
+            abort();
+        }
Finally, at this point we have correct in-memory information again.

Not sure if it's worth the effort of trying to move this further up. We
could at least easily move the bdrv_truncate() to below this, which
would make it's error path less bad.

+        ret = qcow2_mark_clean(bs);
+        if (ret < 0) {
+            return ret;
          }
And this writes them to disk. If we fail, we can keep going on, as the
in-memory information is correct and after a qemu restart, the dirty
flag will trigger a repair.

      }
diff --git a/include/block/block.h b/include/block/block.h
index 341054d..b1f4385 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -498,6 +498,8 @@ typedef enum {
      BLKDBG_PWRITEV_ZERO,
      BLKDBG_PWRITEV_DONE,
+ BLKDBG_EMPTY_IMAGE_PREPARE,
+
      BLKDBG_EVENT_MAX,
  } BlkDebugEvent;
Kevin

Thank you for your review,

Max



reply via email to

[Prev in Thread] Current Thread [Next in Thread]