qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 10/15] target-mips: add Config5.SBRI


From: Leon Alrae
Subject: [Qemu-devel] [PATCH v3 10/15] target-mips: add Config5.SBRI
Date: Fri, 24 Oct 2014 13:42:24 +0100

SDBBP instruction Reserved Instruction control. The purpose of this field is
to restrict availability of SDBBP to kernel mode operation.

If the bit is set then SDBBP instruction can only be executed in kernel mode.
User execution of SDBBP will cause a Reserved Instruction exception.

Additionally add missing Config4 and Config5 cases for dm{f,t}c0.

Signed-off-by: Leon Alrae <address@hidden>
Reviewed-by: Yongbok Kim <address@hidden>
---
 target-mips/cpu.h       | 11 +++++++++--
 target-mips/translate.c | 24 +++++++++++++++++++++++-
 2 files changed, 32 insertions(+), 3 deletions(-)

diff --git a/target-mips/cpu.h b/target-mips/cpu.h
index c66a725..ce9a7a2 100644
--- a/target-mips/cpu.h
+++ b/target-mips/cpu.h
@@ -410,6 +410,7 @@ struct CPUMIPSState {
 #define CP0C5_CV         29
 #define CP0C5_EVA        28
 #define CP0C5_MSAEn      27
+#define CP0C5_SBRI       6
 #define CP0C5_UFR        2
 #define CP0C5_NFExists   0
     int32_t CP0_Config6;
@@ -461,7 +462,7 @@ struct CPUMIPSState {
 #define EXCP_INST_NOTAVAIL 0x2 /* No valid instruction word for BadInstr */
     uint32_t hflags;    /* CPU State */
     /* TMASK defines different execution modes */
-#define MIPS_HFLAG_TMASK  0x1807FF
+#define MIPS_HFLAG_TMASK  0x5807FF
 #define MIPS_HFLAG_MODE   0x00007 /* execution modes                    */
     /* The KSU flags must be the lowest bits in hflags. The flag order
        must be the same as defined for CP0 Status. This allows to use
@@ -505,6 +506,7 @@ struct CPUMIPSState {
 #define MIPS_HFLAG_DSPR2 0x100000  /* Enable access to MIPS DSPR2 resources. */
     /* Extra flag about HWREna register. */
 #define MIPS_HFLAG_HWRENA_ULR 0x200000 /* ULR bit from HWREna is set. */
+#define MIPS_HFLAG_SBRI  0x400000 /* R6 SDBBP causes RI excpt. in user mode */
     target_ulong btarget;        /* Jump / branch target               */
     target_ulong bcond;          /* Branch condition (if needed)       */
 
@@ -760,7 +762,8 @@ static inline void compute_hflags(CPUMIPSState *env)
 {
     env->hflags &= ~(MIPS_HFLAG_COP1X | MIPS_HFLAG_64 | MIPS_HFLAG_CP0 |
                      MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU |
-                     MIPS_HFLAG_AWRAP | MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2);
+                     MIPS_HFLAG_AWRAP | MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2 |
+                     MIPS_HFLAG_SBRI);
     if (!(env->CP0_Status & (1 << CP0St_EXL)) &&
         !(env->CP0_Status & (1 << CP0St_ERL)) &&
         !(env->hflags & MIPS_HFLAG_DM)) {
@@ -796,6 +799,10 @@ static inline void compute_hflags(CPUMIPSState *env)
     if (env->CP0_Status & (1 << CP0St_FR)) {
         env->hflags |= MIPS_HFLAG_F64;
     }
+    if (((env->hflags & MIPS_HFLAG_KSU) != MIPS_HFLAG_KM) &&
+        (env->CP0_Config5 & (1 << CP0C5_SBRI))) {
+        env->hflags |= MIPS_HFLAG_SBRI;
+    }
     if (env->insn_flags & ASE_DSPR2) {
         /* Enables access MIPS DSP resources, now our cpu is DSP ASER2,
            so enable to access DSPR2 resources. */
diff --git a/target-mips/translate.c b/target-mips/translate.c
index 3e6e990..c7a8bbc 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -6225,6 +6225,14 @@ static void gen_dmfc0(DisasContext *ctx, TCGv arg, int 
reg, int sel)
             gen_mfc0_load32(arg, offsetof(CPUMIPSState, CP0_Config3));
             rn = "Config3";
             break;
+        case 4:
+            gen_mfc0_load32(arg, offsetof(CPUMIPSState, CP0_Config4));
+            rn = "Config4";
+            break;
+        case 5:
+            gen_mfc0_load32(arg, offsetof(CPUMIPSState, CP0_Config5));
+            rn = "Config5";
+            break;
        /* 6,7 are implementation dependent */
         case 6:
             gen_mfc0_load32(arg, offsetof(CPUMIPSState, CP0_Config6));
@@ -6843,6 +6851,16 @@ static void gen_dmtc0(DisasContext *ctx, TCGv arg, int 
reg, int sel)
             /* ignored */
             rn = "Config3";
             break;
+        case 4:
+            /* currently ignored */
+            rn = "Config4";
+            break;
+        case 5:
+            gen_helper_mtc0_config5(cpu_env, arg);
+            rn = "Config5";
+            /* Stop translation as we may have switched the execution mode */
+            ctx->bstate = BS_STOP;
+            break;
         /* 6,7 are implementation dependent */
         default:
             rn = "Invalid config selector";
@@ -15801,7 +15819,11 @@ static void decode_opc_special_r6(CPUMIPSState *env, 
DisasContext *ctx)
         }
         break;
     case R6_OPC_SDBBP:
-        generate_exception(ctx, EXCP_DBp);
+        if (ctx->hflags & MIPS_HFLAG_SBRI) {
+            generate_exception(ctx, EXCP_RI);
+        } else {
+            generate_exception(ctx, EXCP_DBp);
+        }
         break;
 #if defined(TARGET_MIPS64)
     case OPC_DLSA:
-- 
2.1.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]