qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [RESEND PATCH v4 09/10] acpi: Add hardware implementation f


From: Tang Chen
Subject: [Qemu-devel] [RESEND PATCH v4 09/10] acpi: Add hardware implementation for memory hot unplug.
Date: Wed, 5 Nov 2014 13:49:54 +0800

This patch adds a new bit to memory hotplug IO port indicating that
memory device is be removed. And set MemStatus->is_removing to false
when the bit is written.

NOTE: MemStatus->is_removing is set to true in acpi_memory_unplug_cb()
when doing memory hot-remove with device_del command.

Signed-off-by: Hu Tao <address@hidden>
Signed-off-by: Tang Chen <address@hidden>
---
 docs/specs/acpi_mem_hotplug.txt |  8 ++++++--
 hw/acpi/memory_hotplug.c        | 14 +++++++++++---
 2 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/docs/specs/acpi_mem_hotplug.txt b/docs/specs/acpi_mem_hotplug.txt
index 1290994..5524c30 100644
--- a/docs/specs/acpi_mem_hotplug.txt
+++ b/docs/specs/acpi_mem_hotplug.txt
@@ -19,7 +19,9 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte 
access):
               1: Device insert event, used to distinguish device for which
                  no device check event to OSPM was issued.
                  It's valid only when bit 1 is set.
-              2-7: reserved and should be ignored by OSPM
+              2: Device remove event, used to indicate that device is being
+                removed.
+              3-7: reserved and should be ignored by OSPM
       [0x15-0x17] reserved
 
   write access:
@@ -35,7 +37,9 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte 
access):
               1: if set to 1 clears device insert event, set by OSPM
                  after it has emitted device check event for the
                  selected memory device
-              2-7: reserved, OSPM must clear them before writing to register
+              2: set by hardware after it has emitted devive eject event for
+                selected memory device
+              3-7: reserved, OSPM must clear them before writing to register
 
 Selecting memory device slot beyond present range has no effect on platform:
    - write accesses to memory hot-plug registers not documented above are
diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 01dea6c..a745bb0 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -75,6 +75,7 @@ static uint64_t acpi_memory_hotplug_read(void *opaque, hwaddr 
addr,
     case 0x14: /* pack and return is_* fields */
         val |= mdev->is_enabled   ? 1 : 0;
         val |= mdev->is_inserting ? 2 : 0;
+        val |= mdev->is_removing  ? 4 : 0;
         trace_mhp_acpi_read_flags(mem_st->selector, val);
         break;
     default:
@@ -121,21 +122,28 @@ static void acpi_memory_hotplug_write(void *opaque, 
hwaddr addr, uint64_t data,
         mdev = &mem_st->devs[mem_st->selector];
         mdev->ost_status = data;
         trace_mhp_acpi_write_ost_status(mem_st->selector, mdev->ost_status);
-        /* TODO: implement memory removal on guest signal */
 
         info = acpi_memory_device_status(mem_st->selector, mdev);
         qapi_event_send_acpi_device_ost(info, &error_abort);
         qapi_free_ACPIOSTInfo(info);
         break;
-    case 0x14:
+    case 0x14: /* set is_* fields */
         mdev = &mem_st->devs[mem_st->selector];
+
         if (data & 2) { /* clear insert event */
             mdev->is_inserting  = false;
             trace_mhp_acpi_clear_insert_evt(mem_st->selector);
+        } else if (data & 4) { /* request removal of device */
+            mdev->is_enabled = false;
+            mdev->is_removing = false;
+            object_unparent(OBJECT(mdev->dimm));
+            mdev->dimm = NULL;
         }
+
+        break;
+    default:
         break;
     }
-
 }
 static const MemoryRegionOps acpi_memory_hotplug_ops = {
     .read = acpi_memory_hotplug_read,
-- 
1.8.4.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]