[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [2.3 PATCH v7 07/10] qmp: Add support of "dirty-bitmap" syn
From: |
John Snow |
Subject: |
[Qemu-devel] [2.3 PATCH v7 07/10] qmp: Add support of "dirty-bitmap" sync mode for drive-backup |
Date: |
Tue, 25 Nov 2014 14:46:37 -0500 |
From: Fam Zheng <address@hidden>
For "dirty-bitmap" sync mode, the block job will iterate through the
given dirty bitmap to decide if a sector needs backup (backup all the
dirty clusters and skip clean ones), just as allocation conditions of
"top" sync mode.
There are two bitmap use modes for sync=dirty-bitmap:
- reset: backup job makes a copy of bitmap and resets the original
one.
- consume: backup job makes the original anonymous (invisible to user)
and releases it after use.
Signed-off-by: Fam Zheng <address@hidden>
Signed-off-by: John Snow <address@hidden>
---
block.c | 5 ++
block/backup.c | 128 ++++++++++++++++++++++++++++++++++++++--------
block/mirror.c | 4 ++
blockdev.c | 18 ++++++-
hmp.c | 4 +-
include/block/block.h | 1 +
include/block/block_int.h | 6 +++
qapi/block-core.json | 30 +++++++++--
qmp-commands.hx | 7 +--
9 files changed, 174 insertions(+), 29 deletions(-)
diff --git a/block.c b/block.c
index 7217066..cf93148 100644
--- a/block.c
+++ b/block.c
@@ -5454,6 +5454,11 @@ void bdrv_dirty_iter_init(BlockDriverState *bs,
hbitmap_iter_init(hbi, bitmap->bitmap, 0);
}
+void bdrv_dirty_iter_set(HBitmapIter *hbi, int64_t offset)
+{
+ hbitmap_iter_init(hbi, hbi->hb, offset);
+}
+
void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
int nr_sectors)
{
diff --git a/block/backup.c b/block/backup.c
index 792e655..8e7d135 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -37,6 +37,10 @@ typedef struct CowRequest {
typedef struct BackupBlockJob {
BlockJob common;
BlockDriverState *target;
+ /* bitmap for sync=dirty-bitmap */
+ BdrvDirtyBitmap *sync_bitmap;
+ /* dirty bitmap granularity */
+ int64_t sync_bitmap_gran;
MirrorSyncMode sync_mode;
RateLimit limit;
BlockdevOnError on_source_error;
@@ -242,6 +246,31 @@ static void backup_complete(BlockJob *job, void *opaque)
g_free(data);
}
+static bool yield_and_check(BackupBlockJob *job)
+{
+ if (block_job_is_cancelled(&job->common)) {
+ return true;
+ }
+
+ /* we need to yield so that qemu_aio_flush() returns.
+ * (without, VM does not reboot)
+ */
+ if (job->common.speed) {
+ uint64_t delay_ns = ratelimit_calculate_delay(&job->limit,
+ job->sectors_read);
+ job->sectors_read = 0;
+ block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME, delay_ns);
+ } else {
+ block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME, 0);
+ }
+
+ if (block_job_is_cancelled(&job->common)) {
+ return true;
+ }
+
+ return false;
+}
+
static void coroutine_fn backup_run(void *opaque)
{
BackupBlockJob *job = opaque;
@@ -254,13 +283,13 @@ static void coroutine_fn backup_run(void *opaque)
};
int64_t start, end;
int ret = 0;
+ bool error_is_read;
QLIST_INIT(&job->inflight_reqs);
qemu_co_rwlock_init(&job->flush_rwlock);
start = 0;
- end = DIV_ROUND_UP(job->common.len / BDRV_SECTOR_SIZE,
- BACKUP_SECTORS_PER_CLUSTER);
+ end = DIV_ROUND_UP(job->common.len, BACKUP_CLUSTER_SIZE);
job->bitmap = hbitmap_alloc(end, 0);
@@ -278,28 +307,45 @@ static void coroutine_fn backup_run(void *opaque)
qemu_coroutine_yield();
job->common.busy = true;
}
+ } else if (job->sync_mode == MIRROR_SYNC_MODE_DIRTY_BITMAP) {
+ /* Dirty Bitmap sync has a slightly different iteration method */
+ HBitmapIter hbi;
+ int64_t sector;
+ int64_t cluster;
+ bool polyrhythmic;
+
+ bdrv_dirty_iter_init(bs, job->sync_bitmap, &hbi);
+ /* Does the granularity happen to match our backup cluster size? */
+ polyrhythmic = (job->sync_bitmap_gran != BACKUP_CLUSTER_SIZE);
+
+ /* Find the next dirty /sector/ and copy that /cluster/ */
+ while ((sector = hbitmap_iter_next(&hbi)) != -1) {
+ if (yield_and_check(job)) {
+ goto leave;
+ }
+ cluster = sector / BACKUP_SECTORS_PER_CLUSTER;
+
+ do {
+ ret = backup_do_cow(bs, cluster * BACKUP_SECTORS_PER_CLUSTER,
+ BACKUP_SECTORS_PER_CLUSTER,
&error_is_read);
+ if ((ret < 0) &&
+ backup_error_action(job, error_is_read, -ret) ==
+ BLOCK_ERROR_ACTION_REPORT) {
+ goto leave;
+ }
+ } while (ret < 0);
+
+ /* Advance (or rewind) our iterator if we need to. */
+ if (polyrhythmic) {
+ bdrv_dirty_iter_set(&hbi,
+ (cluster + 1) *
BACKUP_SECTORS_PER_CLUSTER);
+ }
+ }
} else {
/* Both FULL and TOP SYNC_MODE's require copying.. */
for (; start < end; start++) {
- bool error_is_read;
- if (block_job_is_cancelled(&job->common)) {
- break;
- }
-
- /* we need to yield so that qemu_aio_flush() returns.
- * (without, VM does not reboot)
- */
- if (job->common.speed) {
- uint64_t delay_ns = ratelimit_calculate_delay(
- &job->limit, job->sectors_read);
- job->sectors_read = 0;
- block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME,
delay_ns);
- } else {
- block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME, 0);
- }
-
- if (block_job_is_cancelled(&job->common)) {
+ if (yield_and_check(job)) {
break;
}
@@ -351,12 +397,16 @@ static void coroutine_fn backup_run(void *opaque)
}
}
+leave:
notifier_with_return_remove(&before_write);
/* wait until pending backup_do_cow() calls have completed */
qemu_co_rwlock_wrlock(&job->flush_rwlock);
qemu_co_rwlock_unlock(&job->flush_rwlock);
+ if (job->sync_bitmap) {
+ bdrv_release_dirty_bitmap(bs, job->sync_bitmap);
+ }
hbitmap_free(job->bitmap);
bdrv_iostatus_disable(target);
@@ -368,12 +418,15 @@ static void coroutine_fn backup_run(void *opaque)
void backup_start(BlockDriverState *bs, BlockDriverState *target,
int64_t speed, MirrorSyncMode sync_mode,
+ BdrvDirtyBitmap *sync_bitmap,
+ BitmapUseMode bitmap_mode,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
BlockCompletionFunc *cb, void *opaque,
Error **errp)
{
int64_t len;
+ BdrvDirtyBitmap *original;
assert(bs);
assert(target);
@@ -386,6 +439,35 @@ void backup_start(BlockDriverState *bs, BlockDriverState
*target,
return;
}
+ if (sync_mode == MIRROR_SYNC_MODE_DIRTY_BITMAP) {
+ if (!sync_bitmap) {
+ error_setg(errp, "must provide a valid bitmap name for "
+ "\"dirty-bitmap\" sync mode");
+ return;
+ }
+
+ switch (bitmap_mode) {
+ case BITMAP_USE_MODE_RESET:
+ original = sync_bitmap;
+ sync_bitmap = bdrv_copy_dirty_bitmap(bs, sync_bitmap, NULL);
+ bdrv_reset_dirty_bitmap(bs, original);
+ break;
+ case BITMAP_USE_MODE_CONSUME:
+ bdrv_dirty_bitmap_make_anon(bs, sync_bitmap);
+ break;
+ default:
+ g_assert_not_reached();
+ error_setg(errp, "Invalid BitmapUseMode (0x%02x) given to
backup_start.", bitmap_mode);
+ return;
+ }
+ bdrv_disable_dirty_bitmap(bs, sync_bitmap);
+ } else if (sync_bitmap) {
+ error_setg(errp,
+ "sync_bitmap provided to backup_run, but received an
incompatible sync_mode (0x%02x)",
+ sync_mode);
+ return;
+ }
+
len = bdrv_getlength(bs);
if (len < 0) {
error_setg_errno(errp, -len, "unable to get length for '%s'",
@@ -403,6 +485,12 @@ void backup_start(BlockDriverState *bs, BlockDriverState
*target,
job->on_target_error = on_target_error;
job->target = target;
job->sync_mode = sync_mode;
+ job->sync_bitmap = sync_mode == MIRROR_SYNC_MODE_DIRTY_BITMAP ?
+ sync_bitmap : NULL;
+ if (sync_bitmap) {
+ job->sync_bitmap_gran =
+ bdrv_dirty_bitmap_granularity(bs, job->sync_bitmap);
+ }
job->common.len = len;
job->common.co = qemu_coroutine_create(backup_run);
qemu_coroutine_enter(job->common.co, job);
diff --git a/block/mirror.c b/block/mirror.c
index 3633632..af91ae0 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -714,6 +714,10 @@ void mirror_start(BlockDriverState *bs, BlockDriverState
*target,
bool is_none_mode;
BlockDriverState *base;
+ if (mode == MIRROR_SYNC_MODE_DIRTY_BITMAP) {
+ error_setg(errp, "Sync mode 'dirty-bitmap' not supported");
+ return;
+ }
is_none_mode = mode == MIRROR_SYNC_MODE_NONE;
base = mode == MIRROR_SYNC_MODE_TOP ? bs->backing_hd : NULL;
mirror_start_job(bs, target, replaces,
diff --git a/blockdev.c b/blockdev.c
index baaf902..adf841a 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1470,6 +1470,8 @@ static void drive_backup_prepare(BlkTransactionState
*common, Error **errp)
backup->sync,
backup->has_mode, backup->mode,
backup->has_speed, backup->speed,
+ backup->has_bitmap, backup->bitmap,
+ backup->has_bitmap_use_mode, backup->bitmap_use_mode,
backup->has_on_source_error, backup->on_source_error,
backup->has_on_target_error, backup->on_target_error,
&local_err);
@@ -2245,6 +2247,8 @@ void qmp_drive_backup(const char *device, const char
*target,
enum MirrorSyncMode sync,
bool has_mode, enum NewImageMode mode,
bool has_speed, int64_t speed,
+ bool has_bitmap, const char *bitmap,
+ bool has_bitmap_use_mode, enum BitmapUseMode bitmap_mode,
bool has_on_source_error, BlockdevOnError
on_source_error,
bool has_on_target_error, BlockdevOnError
on_target_error,
Error **errp)
@@ -2252,6 +2256,7 @@ void qmp_drive_backup(const char *device, const char
*target,
BlockDriverState *bs;
BlockDriverState *target_bs;
BlockDriverState *source = NULL;
+ BdrvDirtyBitmap *bmap = NULL;
AioContext *aio_context;
BlockDriver *drv = NULL;
Error *local_err = NULL;
@@ -2347,7 +2352,18 @@ void qmp_drive_backup(const char *device, const char
*target,
bdrv_set_aio_context(target_bs, aio_context);
- backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error,
+ if (has_bitmap) {
+ bmap = bdrv_find_dirty_bitmap(bs, bitmap);
+ if (!bmap) {
+ error_setg(errp, "has_bitmap was set, but bitmap '%s' could not be
found",
+ bitmap);
+ goto out;
+ }
+ }
+
+ backup_start(bs, target_bs, speed, sync, bmap,
+ has_bitmap_use_mode ? bitmap_mode : BITMAP_USE_MODE_RESET,
+ on_source_error, on_target_error,
block_job_cb, bs, &local_err);
if (local_err != NULL) {
bdrv_unref(target_bs);
diff --git a/hmp.c b/hmp.c
index 63d7686..bc5a2d2 100644
--- a/hmp.c
+++ b/hmp.c
@@ -966,7 +966,9 @@ void hmp_drive_backup(Monitor *mon, const QDict *qdict)
qmp_drive_backup(device, filename, !!format, format,
full ? MIRROR_SYNC_MODE_FULL : MIRROR_SYNC_MODE_TOP,
- true, mode, false, 0, false, 0, false, 0, &err);
+ true, mode, false, 0, false, NULL,
+ false, 0,
+ false, 0, false, 0, &err);
hmp_handle_error(mon, &err);
}
diff --git a/include/block/block.h b/include/block/block.h
index b6df2ae..4774fef 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -451,6 +451,7 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t
cur_sector, int nr_sectors);
void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int
nr_sectors);
void bdrv_dirty_iter_init(BlockDriverState *bs,
BdrvDirtyBitmap *bitmap, struct HBitmapIter *hbi);
+void bdrv_dirty_iter_set(struct HBitmapIter *hbi, int64_t offset);
int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap);
void bdrv_enable_copy_on_read(BlockDriverState *bs);
diff --git a/include/block/block_int.h b/include/block/block_int.h
index a1c17b9..215a27d 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -571,6 +571,10 @@ void mirror_start(BlockDriverState *bs, BlockDriverState
*target,
* @target: Block device to write to.
* @speed: The maximum speed, in bytes per second, or 0 for unlimited.
* @sync_mode: What parts of the disk image should be copied to the
destination.
+ * @sync_bitmap: The dirty bitmap if sync_mode is
MIRROR_SYNC_MODE_DIRTY_BITMAP.
+ * @bitmap_mode: BITMAP_USE_MODE_{CONSUME, RESET}
+ * Reset: Make a copy and reset the original bitmap.
+ * Consume: Anonymize the bitmap and free it after completion.
* @on_source_error: The action to take upon error reading from the source.
* @on_target_error: The action to take upon error writing to the target.
* @cb: Completion function for the job.
@@ -581,6 +585,8 @@ void mirror_start(BlockDriverState *bs, BlockDriverState
*target,
*/
void backup_start(BlockDriverState *bs, BlockDriverState *target,
int64_t speed, MirrorSyncMode sync_mode,
+ BdrvDirtyBitmap *sync_bitmap,
+ BitmapUseMode bitmap_mode,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
BlockCompletionFunc *cb, void *opaque,
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 46967ac..3f7a35d 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -470,7 +470,7 @@
# Since: 1.3
##
{ 'enum': 'MirrorSyncMode',
- 'data': ['top', 'full', 'none'] }
+ 'data': ['top', 'full', 'none', 'dirty-bitmap'] }
##
# @BlockJobType:
@@ -633,6 +633,21 @@
'*format': 'str', '*mode': 'NewImageMode' } }
##
+# @BitmapUseMode
+#
+# An enumeration that tells QEMU what operation to take when using a bitmap
+# in drive backup sync mode dirty-bitmap.
+#
+# @consume: QEMU should just consume the bitmap and release it after using
+#
+# @reset: QEMU should reset the dirty bitmap
+#
+# Since: 2.3
+##
+{ 'enum': 'BitmapUseMode',
+'data': [ 'consume', 'reset' ] }
+
+##
# @DriveBackup
#
# @device: the name of the device which should be copied.
@@ -645,14 +660,20 @@
# probe if @mode is 'existing', else the format of the source
#
# @sync: what parts of the disk image should be copied to the destination
-# (all the disk, only the sectors allocated in the topmost image, or
-# only new I/O).
+# (all the disk, only the sectors allocated in the topmost image, from a
+# dirty bitmap, or only new I/O).
#
# @mode: #optional whether and how QEMU should create a new image, default is
# 'absolute-paths'.
#
# @speed: #optional the maximum speed, in bytes per second
#
+# @bitmap: #optional the name of dirty bitmap if sync is "dirty-bitmap"
+# (Since 2.3)
+#
+# @bitmap-use-mode: #optional which operation to take when consuming @bitmap,
+# default is reset. (Since 2.3)
+#
# @on-source-error: #optional the action to take on an error on the source,
# default 'report'. 'stop' and 'enospc' can only be used
# if the block device supports io-status (see BlockInfo).
@@ -670,7 +691,8 @@
{ 'type': 'DriveBackup',
'data': { 'device': 'str', 'target': 'str', '*format': 'str',
'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
- '*speed': 'int',
+ '*speed': 'int', '*bitmap': 'str',
+ '*bitmap-use-mode': 'BitmapUseMode',
'*on-source-error': 'BlockdevOnError',
'*on-target-error': 'BlockdevOnError' } }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 8751a06..84f9bd6 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -1048,7 +1048,7 @@ EQMP
{
.name = "drive-backup",
.args_type = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
- "on-source-error:s?,on-target-error:s?",
+ "bitmap:s?,on-source-error:s?,on-target-error:s?",
.mhandler.cmd_new = qmp_marshal_input_drive_backup,
},
@@ -1075,8 +1075,9 @@ Arguments:
(json-string, optional)
- "sync": what parts of the disk image should be copied to the destination;
possibilities include "full" for all the disk, "top" for only the sectors
- allocated in the topmost image, or "none" to only replicate new I/O
- (MirrorSyncMode).
+ allocated in the topmost image, "dirty-bitmap" for only the dirty sectors in
+ the bitmap, or "none" to only replicate new I/O (MirrorSyncMode).
+- "bitmap": dirty bitmap name for sync==dirty-bitmap
- "mode": whether and how QEMU should create a new image
(NewImageMode, optional, default 'absolute-paths')
- "speed": the maximum speed, in bytes per second (json-int, optional)
--
1.9.3
- Re: [Qemu-devel] [2.3 PATCH v7 03/10] block: Introduce bdrv_dirty_bitmap_granularity(), (continued)
- [Qemu-devel] [2.3 PATCH v7 01/10] qapi: Add optional field "name" to block dirty bitmap, John Snow, 2014/11/25
- [Qemu-devel] [2.3 PATCH v7 05/10] block: Add bdrv_copy_dirty_bitmap and bdrv_reset_dirty_bitmap, John Snow, 2014/11/25
- [Qemu-devel] [2.3 PATCH v7 06/10] qmp: Add block-dirty-bitmap-enable and block-dirty-bitmap-disable, John Snow, 2014/11/25
- [Qemu-devel] [2.3 PATCH v7 10/10] qemu-iotests: Add tests for drive-backup sync=dirty-bitmap, John Snow, 2014/11/25
- [Qemu-devel] [2.3 PATCH v7 07/10] qmp: Add support of "dirty-bitmap" sync mode for drive-backup,
John Snow <=
- [Qemu-devel] [2.3 PATCH v7 04/10] hbitmap: Add hbitmap_copy, John Snow, 2014/11/25
- [Qemu-devel] [2.3 PATCH v7 08/10] qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}, John Snow, 2014/11/25
- [Qemu-devel] [2.3 PATCH v7 09/10] qmp: Add dirty bitmap 'enabled' field in query-block, John Snow, 2014/11/25
- [Qemu-devel] [2.3 PATCH v7 02/10] qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-remove, John Snow, 2014/11/25