[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH
From: |
Gavin Shan |
Subject: |
Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset |
Date: |
Mon, 30 Mar 2015 20:34:52 +1100 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Mon, Mar 30, 2015 at 01:39:16PM +1100, David Gibson wrote:
>On Thu, Mar 26, 2015 at 04:35:01PM +1100, Gavin Shan wrote:
>> The PCI device MSIx table is cleaned out in hardware after EEH PE
>> reset. However, we still hold the stale MSIx entries in QEMU, which
>> should be cleared accordingly. Otherwise, we will run into another
>> (recursive) EEH error and the PCI devices contained in the PE have
>> to be offlined exceptionally.
>>
>> The patch introduces function vfio_eeh_pe_reset(), which is called
>> by sPAPR when asserting hot or fundamental reset, to clear stale MSIx
>> table before EEH PE reset so that MSIx table could be restored properly
>> after EEH PE reset.
>>
>> Signed-off-by: Gavin Shan <address@hidden>
>> ---
>> hw/ppc/spapr_pci_vfio.c | 13 +++++++++----
>> hw/vfio/Makefile.objs | 6 +++++-
>> hw/vfio/pci-stub.c | 16 ++++++++++++++++
>> hw/vfio/pci.c | 36 ++++++++++++++++++++++++++++++++++++
>> include/hw/vfio/vfio.h | 2 ++
>> 5 files changed, 68 insertions(+), 5 deletions(-)
>> create mode 100644 hw/vfio/pci-stub.c
>>
>> diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
>> index 99a1be5..6fa3afe 100644
>> --- a/hw/ppc/spapr_pci_vfio.c
>> +++ b/hw/ppc/spapr_pci_vfio.c
>> @@ -151,19 +151,24 @@ static int spapr_phb_vfio_eeh_reset(sPAPRPHBState
>> *sphb, int option)
>> switch (option) {
>> case RTAS_SLOT_RESET_DEACTIVATE:
>> op.op = VFIO_EEH_PE_RESET_DEACTIVATE;
>> + ret = vfio_container_ioctl(&svphb->phb.iommu_as,
>> + svphb->iommugroupid,
>> + VFIO_EEH_PE_OP, &op);
>
>For consistency, I think all the reset operations should go through
>vfio_eeh_pe_reset(), even though in this case it won't do more than
>call vfio_container_ioctl().
>
Fair enough. I'll fix :-)
>> break;
>> case RTAS_SLOT_RESET_HOT:
>> - op.op = VFIO_EEH_PE_RESET_HOT;
>> + ret = vfio_eeh_pe_reset(&svphb->phb.iommu_as,
>> + svphb->iommugroupid,
>> + VFIO_EEH_PE_RESET_HOT);
>> break;
>> case RTAS_SLOT_RESET_FUNDAMENTAL:
>> - op.op = VFIO_EEH_PE_RESET_FUNDAMENTAL;
>> + ret = vfio_eeh_pe_reset(&svphb->phb.iommu_as,
>> + svphb->iommugroupid,
>> + VFIO_EEH_PE_RESET_FUNDAMENTAL);
>> break;
>> default:
>> return RTAS_OUT_PARAM_ERROR;
>> }
>>
>> - ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
>> - VFIO_EEH_PE_OP, &op);
>> if (ret < 0) {
>> return RTAS_OUT_HW_ERROR;
>> }
>> diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
>> index e31f30e..1b8a065 100644
>> --- a/hw/vfio/Makefile.objs
>> +++ b/hw/vfio/Makefile.objs
>> @@ -1,4 +1,8 @@
>> ifeq ($(CONFIG_LINUX), y)
>> obj-$(CONFIG_SOFTMMU) += common.o
>> -obj-$(CONFIG_PCI) += pci.o
>> +ifeq ($(CONFIG_PCI), y)
>> +obj-y += pci.o
>> +else
>> +obj-y += pci-stub.o
>> +endif
>> endif
>> diff --git a/hw/vfio/pci-stub.c b/hw/vfio/pci-stub.c
>> new file mode 100644
>> index 0000000..f317c1e
>> --- /dev/null
>> +++ b/hw/vfio/pci-stub.c
>> @@ -0,0 +1,16 @@
>> +/*
>> + * To include the file on !CONFIG_PCI
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2. See
>> + * the COPYING file in the top-level directory.
>> + */
>> +
>> +#include <linux/vfio.h>
>> +
>> +#include "exec/memory.h"
>> +#include "hw/vfio/vfio.h"
>> +
>> +int vfio_eeh_pe_reset(AddressSpace *as, int32_t groupid, uint32_t option)
>> +{
>> + return -1;
>
>Probably should have assert(0) here - this should never be called if
>!CONFIG_PCI.
>
Indeed, assert(0) would be better. I just replied to ask for dropping the stub
for !CONFIG_PCI if you and Alex.W agree.
Thanks,
Gavin
>> +}
>> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
>> index 6b80539..d0fd4b4 100644
>> --- a/hw/vfio/pci.c
>> +++ b/hw/vfio/pci.c
>> @@ -3319,6 +3319,42 @@ static void
>> vfio_unregister_req_notifier(VFIOPCIDevice *vdev)
>> vdev->req_enabled = false;
>> }
>>
>> +int vfio_eeh_pe_reset(AddressSpace *as, int32_t groupid, uint32_t option)
>> +{
>> + VFIOGroup *group;
>> + VFIODevice *vbasedev;
>> + VFIOPCIDevice *vdev;
>> + struct vfio_eeh_pe_op op = {
>> + .argsz = sizeof(op),
>> + .op = option
>> + };
>> +
>> + group = vfio_get_group(groupid, as);
>> + if (!group) {
>> + error_report("vfio: group %d not found\n", groupid);
>> + return -1;
>> + }
>> +
>> + /*
>> + * The MSIx table will be cleaned out by reset. We need
>> + * disable it so that it can be reenabled properly. Also,
>> + * the cached MSIx table should be cleared as it's not
>> + * reflecting the contents in hardware.
>> + */
>> + QLIST_FOREACH(vbasedev, &group->device_list, next) {
>> + vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
>> + if (msix_enabled(&vdev->pdev)) {
>> + vfio_disable_msix(vdev);
>> + }
>> +
>> + msix_reset(&vdev->pdev);
>> + }
>> +
>> + vfio_put_group(group);
>> +
>> + return vfio_container_ioctl(as, groupid, VFIO_EEH_PE_OP, &op);
>> +}
>> +
>> static int vfio_initfn(PCIDevice *pdev)
>> {
>> VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
>> diff --git a/include/hw/vfio/vfio.h b/include/hw/vfio/vfio.h
>> index 0b26cd8..52de277 100644
>> --- a/include/hw/vfio/vfio.h
>> +++ b/include/hw/vfio/vfio.h
>> @@ -5,5 +5,7 @@
>>
>> extern int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
>> int req, void *param);
>> +extern int vfio_eeh_pe_reset(AddressSpace *as,
>> + int32_t groupid, uint32_t option);
>>
>> #endif
>
>--
>David Gibson | I'll have my music baroque, and my code
>david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
> | _way_ _around_!
>http://www.ozlabs.org/~dgibson
[Qemu-devel] [PATCH 2/2] sPAPR: Reenable EEH functionality on reboot, Gavin Shan, 2015/03/26