[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4 03/17] hw/intc/arm_gic: Switch to read/write
From: |
Edgar E. Iglesias |
Subject: |
Re: [Qemu-devel] [PATCH v4 03/17] hw/intc/arm_gic: Switch to read/write callbacks with tx attributes |
Date: |
Tue, 5 May 2015 10:31:50 +1000 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Fri, May 01, 2015 at 06:50:29PM +0100, Peter Maydell wrote:
> Switch the GIC's MMIO callback functions to the read_with_attrs
> and write_with_attrs functions which provide MemTxAttrs. This will
> allow the GIC to correctly handle secure and nonsecure register
> accesses.
>
> Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Edgar E. Iglesias <address@hidden>
> ---
> hw/intc/arm_gic.c | 144
> ++++++++++++++++++++++++++++++++++--------------------
> 1 file changed, 90 insertions(+), 54 deletions(-)
>
> diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
> index cdf7408..29015c2 100644
> --- a/hw/intc/arm_gic.c
> +++ b/hw/intc/arm_gic.c
> @@ -282,7 +282,7 @@ void gic_complete_irq(GICState *s, int cpu, int irq)
> }
> }
>
> -static uint32_t gic_dist_readb(void *opaque, hwaddr offset)
> +static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs)
> {
> GICState *s = (GICState *)opaque;
> uint32_t res;
> @@ -418,24 +418,30 @@ bad_reg:
> return 0;
> }
>
> -static uint32_t gic_dist_readw(void *opaque, hwaddr offset)
> +static MemTxResult gic_dist_read(void *opaque, hwaddr offset, uint64_t *data,
> + unsigned size, MemTxAttrs attrs)
> {
> - uint32_t val;
> - val = gic_dist_readb(opaque, offset);
> - val |= gic_dist_readb(opaque, offset + 1) << 8;
> - return val;
> -}
> -
> -static uint32_t gic_dist_readl(void *opaque, hwaddr offset)
> -{
> - uint32_t val;
> - val = gic_dist_readw(opaque, offset);
> - val |= gic_dist_readw(opaque, offset + 2) << 16;
> - return val;
> + switch (size) {
> + case 1:
> + *data = gic_dist_readb(opaque, offset, attrs);
> + return MEMTX_OK;
> + case 2:
> + *data = gic_dist_readb(opaque, offset, attrs);
> + *data |= gic_dist_readb(opaque, offset + 1, attrs) << 8;
> + return MEMTX_OK;
> + case 4:
> + *data = gic_dist_readb(opaque, offset, attrs);
> + *data |= gic_dist_readb(opaque, offset + 1, attrs) << 8;
> + *data |= gic_dist_readb(opaque, offset + 2, attrs) << 16;
> + *data |= gic_dist_readb(opaque, offset + 3, attrs) << 24;
> + return MEMTX_OK;
> + default:
> + return MEMTX_ERROR;
> + }
> }
>
> static void gic_dist_writeb(void *opaque, hwaddr offset,
> - uint32_t value)
> + uint32_t value, MemTxAttrs attrs)
> {
> GICState *s = (GICState *)opaque;
> int irq;
> @@ -612,14 +618,14 @@ bad_reg:
> }
>
> static void gic_dist_writew(void *opaque, hwaddr offset,
> - uint32_t value)
> + uint32_t value, MemTxAttrs attrs)
> {
> - gic_dist_writeb(opaque, offset, value & 0xff);
> - gic_dist_writeb(opaque, offset + 1, value >> 8);
> + gic_dist_writeb(opaque, offset, value & 0xff, attrs);
> + gic_dist_writeb(opaque, offset + 1, value >> 8, attrs);
> }
>
> static void gic_dist_writel(void *opaque, hwaddr offset,
> - uint32_t value)
> + uint32_t value, MemTxAttrs attrs)
> {
> GICState *s = (GICState *)opaque;
> if (offset == 0xf00) {
> @@ -655,45 +661,72 @@ static void gic_dist_writel(void *opaque, hwaddr offset,
> gic_update(s);
> return;
> }
> - gic_dist_writew(opaque, offset, value & 0xffff);
> - gic_dist_writew(opaque, offset + 2, value >> 16);
> + gic_dist_writew(opaque, offset, value & 0xffff, attrs);
> + gic_dist_writew(opaque, offset + 2, value >> 16, attrs);
> +}
> +
> +static MemTxResult gic_dist_write(void *opaque, hwaddr offset, uint64_t data,
> + unsigned size, MemTxAttrs attrs)
> +{
> + switch (size) {
> + case 1:
> + gic_dist_writeb(opaque, offset, data, attrs);
> + return MEMTX_OK;
> + case 2:
> + gic_dist_writew(opaque, offset, data, attrs);
> + return MEMTX_OK;
> + case 4:
> + gic_dist_writel(opaque, offset, data, attrs);
> + return MEMTX_OK;
> + default:
> + return MEMTX_ERROR;
> + }
> }
>
> static const MemoryRegionOps gic_dist_ops = {
> - .old_mmio = {
> - .read = { gic_dist_readb, gic_dist_readw, gic_dist_readl, },
> - .write = { gic_dist_writeb, gic_dist_writew, gic_dist_writel, },
> - },
> + .read_with_attrs = gic_dist_read,
> + .write_with_attrs = gic_dist_write,
> .endianness = DEVICE_NATIVE_ENDIAN,
> };
>
> -static uint32_t gic_cpu_read(GICState *s, int cpu, int offset)
> +static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset,
> + uint64_t *data, MemTxAttrs attrs)
> {
> switch (offset) {
> case 0x00: /* Control */
> - return s->cpu_enabled[cpu];
> + *data = s->cpu_enabled[cpu];
> + break;
> case 0x04: /* Priority mask */
> - return s->priority_mask[cpu];
> + *data = s->priority_mask[cpu];
> + break;
> case 0x08: /* Binary Point */
> - return s->bpr[cpu];
> + *data = s->bpr[cpu];
> + break;
> case 0x0c: /* Acknowledge */
> - return gic_acknowledge_irq(s, cpu);
> + *data = gic_acknowledge_irq(s, cpu);
> + break;
> case 0x14: /* Running Priority */
> - return s->running_priority[cpu];
> + *data = s->running_priority[cpu];
> + break;
> case 0x18: /* Highest Pending Interrupt */
> - return s->current_pending[cpu];
> + *data = s->current_pending[cpu];
> + break;
> case 0x1c: /* Aliased Binary Point */
> - return s->abpr[cpu];
> + *data = s->abpr[cpu];
> + break;
> case 0xd0: case 0xd4: case 0xd8: case 0xdc:
> - return s->apr[(offset - 0xd0) / 4][cpu];
> + *data = s->apr[(offset - 0xd0) / 4][cpu];
> + break;
> default:
> qemu_log_mask(LOG_GUEST_ERROR,
> "gic_cpu_read: Bad offset %x\n", (int)offset);
> - return 0;
> + return MEMTX_ERROR;
> }
> + return MEMTX_OK;
> }
>
> -static void gic_cpu_write(GICState *s, int cpu, int offset, uint32_t value)
> +static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset,
> + uint32_t value, MemTxAttrs attrs)
> {
> switch (offset) {
> case 0x00: /* Control */
> @@ -708,7 +741,7 @@ static void gic_cpu_write(GICState *s, int cpu, int
> offset, uint32_t value)
> break;
> case 0x10: /* End Of Interrupt */
> gic_complete_irq(s, cpu, value & 0x3ff);
> - return;
> + return MEMTX_OK;
> case 0x1c: /* Aliased Binary Point */
> if (s->revision >= 2) {
> s->abpr[cpu] = (value & 0x7);
> @@ -720,56 +753,59 @@ static void gic_cpu_write(GICState *s, int cpu, int
> offset, uint32_t value)
> default:
> qemu_log_mask(LOG_GUEST_ERROR,
> "gic_cpu_write: Bad offset %x\n", (int)offset);
> - return;
> + return MEMTX_ERROR;
> }
> gic_update(s);
> + return MEMTX_OK;
> }
>
> /* Wrappers to read/write the GIC CPU interface for the current CPU */
> -static uint64_t gic_thiscpu_read(void *opaque, hwaddr addr,
> - unsigned size)
> +static MemTxResult gic_thiscpu_read(void *opaque, hwaddr addr, uint64_t
> *data,
> + unsigned size, MemTxAttrs attrs)
> {
> GICState *s = (GICState *)opaque;
> - return gic_cpu_read(s, gic_get_current_cpu(s), addr);
> + return gic_cpu_read(s, gic_get_current_cpu(s), addr, data, attrs);
> }
>
> -static void gic_thiscpu_write(void *opaque, hwaddr addr,
> - uint64_t value, unsigned size)
> +static MemTxResult gic_thiscpu_write(void *opaque, hwaddr addr,
> + uint64_t value, unsigned size,
> + MemTxAttrs attrs)
> {
> GICState *s = (GICState *)opaque;
> - gic_cpu_write(s, gic_get_current_cpu(s), addr, value);
> + return gic_cpu_write(s, gic_get_current_cpu(s), addr, value, attrs);
> }
>
> /* Wrappers to read/write the GIC CPU interface for a specific CPU.
> * These just decode the opaque pointer into GICState* + cpu id.
> */
> -static uint64_t gic_do_cpu_read(void *opaque, hwaddr addr,
> - unsigned size)
> +static MemTxResult gic_do_cpu_read(void *opaque, hwaddr addr, uint64_t *data,
> + unsigned size, MemTxAttrs attrs)
> {
> GICState **backref = (GICState **)opaque;
> GICState *s = *backref;
> int id = (backref - s->backref);
> - return gic_cpu_read(s, id, addr);
> + return gic_cpu_read(s, id, addr, data, attrs);
> }
>
> -static void gic_do_cpu_write(void *opaque, hwaddr addr,
> - uint64_t value, unsigned size)
> +static MemTxResult gic_do_cpu_write(void *opaque, hwaddr addr,
> + uint64_t value, unsigned size,
> + MemTxAttrs attrs)
> {
> GICState **backref = (GICState **)opaque;
> GICState *s = *backref;
> int id = (backref - s->backref);
> - gic_cpu_write(s, id, addr, value);
> + return gic_cpu_write(s, id, addr, value, attrs);
> }
>
> static const MemoryRegionOps gic_thiscpu_ops = {
> - .read = gic_thiscpu_read,
> - .write = gic_thiscpu_write,
> + .read_with_attrs = gic_thiscpu_read,
> + .write_with_attrs = gic_thiscpu_write,
> .endianness = DEVICE_NATIVE_ENDIAN,
> };
>
> static const MemoryRegionOps gic_cpu_ops = {
> - .read = gic_do_cpu_read,
> - .write = gic_do_cpu_write,
> + .read_with_attrs = gic_do_cpu_read,
> + .write_with_attrs = gic_do_cpu_write,
> .endianness = DEVICE_NATIVE_ENDIAN,
> };
>
> --
> 1.9.1
>
- Re: [Qemu-devel] [PATCH v4 02/17] hw/intc/arm_gic: Add Security Extensions property, (continued)
- [Qemu-devel] [PATCH v4 11/17] hw/intc/arm_gic: Handle grouping for GICC_HPPIR, Peter Maydell, 2015/05/01
- [Qemu-devel] [PATCH v4 10/17] hw/intc/arm_gic: Restrict priority view, Peter Maydell, 2015/05/01
- [Qemu-devel] [PATCH v4 08/17] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked, Peter Maydell, 2015/05/01
- [Qemu-devel] [PATCH v4 09/17] hw/intc/arm_gic: Implement Non-secure view of RPR, Peter Maydell, 2015/05/01
- [Qemu-devel] [PATCH v4 03/17] hw/intc/arm_gic: Switch to read/write callbacks with tx attributes, Peter Maydell, 2015/05/01
- Re: [Qemu-devel] [PATCH v4 03/17] hw/intc/arm_gic: Switch to read/write callbacks with tx attributes,
Edgar E. Iglesias <=
- [Qemu-devel] [PATCH v4 01/17] hw/intc/arm_gic: Create outbound FIQ lines, Peter Maydell, 2015/05/01
- [Qemu-devel] [PATCH v4 06/17] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked, Peter Maydell, 2015/05/01
- [Qemu-devel] [PATCH v4 13/17] hw/intc/arm_gic: Change behavior of IAR writes, Peter Maydell, 2015/05/01
- [Qemu-devel] [PATCH v4 04/17] hw/intc/arm_gic: Add Interrupt Group Registers, Peter Maydell, 2015/05/01
- [Qemu-devel] [PATCH v4 05/17] hw/intc/arm_gic_kvm.c: Save and restore GICD_IGROUPRn state, Peter Maydell, 2015/05/01
- [Qemu-devel] [PATCH v4 12/17] hw/intc/arm_gic: Change behavior of EOIR writes, Peter Maydell, 2015/05/01