qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 7/9] rocker: add tests


From: Stefan Hajnoczi
Subject: [Qemu-devel] [PULL 7/9] rocker: add tests
Date: Mon, 11 May 2015 16:26:17 +0100

From: Scott Feldman <address@hidden>

Add some basic test for rocker to test L2/L3/L4 functionality.  Requires an
external test environment, simp, located here:

https://github.com/scottfeldman/simp

To run tests, simp environment must be installed and a suitable VM image built
and installed with a Linux 3.18 (or greater) kernel with rocker driver support
enabled.

Signed-off-by: Scott Feldman <address@hidden>
Message-id: address@hidden
Signed-off-by: Stefan Hajnoczi <address@hidden>
---
 tests/rocker/README          |  5 ++++
 tests/rocker/all             | 19 ++++++++++++
 tests/rocker/bridge          | 48 ++++++++++++++++++++++++++++++
 tests/rocker/bridge-stp      | 57 ++++++++++++++++++++++++++++++++++++
 tests/rocker/bridge-vlan     | 57 ++++++++++++++++++++++++++++++++++++
 tests/rocker/bridge-vlan-stp | 69 ++++++++++++++++++++++++++++++++++++++++++++
 tests/rocker/port            | 22 ++++++++++++++
 tests/rocker/tut.dot         |  8 +++++
 8 files changed, 285 insertions(+)
 create mode 100644 tests/rocker/README
 create mode 100755 tests/rocker/all
 create mode 100755 tests/rocker/bridge
 create mode 100755 tests/rocker/bridge-stp
 create mode 100755 tests/rocker/bridge-vlan
 create mode 100755 tests/rocker/bridge-vlan-stp
 create mode 100755 tests/rocker/port
 create mode 100644 tests/rocker/tut.dot

diff --git a/tests/rocker/README b/tests/rocker/README
new file mode 100644
index 0000000..531e673
--- /dev/null
+++ b/tests/rocker/README
@@ -0,0 +1,5 @@
+Tests require simp (simple network simulator) found here:
+
+https://github.com/scottfeldman/simp
+
+Run 'all' to run all tests.
diff --git a/tests/rocker/all b/tests/rocker/all
new file mode 100755
index 0000000..d5ae963
--- /dev/null
+++ b/tests/rocker/all
@@ -0,0 +1,19 @@
+echo -n "Running port test...              "
+./port
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge test...            "
+./bridge
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge STP test...        "
+./bridge-stp
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge VLAN test...       "
+./bridge-vlan
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge VLAN STP test...   "
+./bridge-vlan-stp
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
diff --git a/tests/rocker/bridge b/tests/rocker/bridge
new file mode 100755
index 0000000..7a03f9a
--- /dev/null
+++ b/tests/rocker/bridge
@@ -0,0 +1,48 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd 
of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# turn on learning in HW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning on self"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning on self"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+simp ssh tut sw1 --cmd "sudo ifconfig br0 11.0.0.3/24"
+
+# config IP on hosts
+
+simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+if [ $? -ne 0 ]; then exit 1; fi
+simp ssh tut h1 --cmd "ping -c10 11.0.0.3 >/dev/null"
diff --git a/tests/rocker/bridge-stp b/tests/rocker/bridge-stp
new file mode 100755
index 0000000..4a111a1
--- /dev/null
+++ b/tests/rocker/bridge-stp
@@ -0,0 +1,57 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo brctl stp br0 on"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd 
of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# turn on learning in HW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning on self"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning on self"
+
+# config IP on hosts
+
+simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -w 1 -c1 11.0.0.2 >/dev/null"
+if [ $? -eq 0 ]; then exit 1; fi
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
diff --git a/tests/rocker/bridge-vlan b/tests/rocker/bridge-vlan
new file mode 100755
index 0000000..9fa3431
--- /dev/null
+++ b/tests/rocker/bridge-vlan
@@ -0,0 +1,57 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+# turn on vlan filtering on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd 
of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+simp ssh tut sw1 --cmd "echo 1 | sudo dd 
of=/sys/class/net/br0/bridge/vlan_filtering 2> /dev/null"
+
+# add both ports to VLAN 57
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp1 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp2 master"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# turn on learning in HW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning on self"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning on self"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+
+# config IP on host VLANs
+
+simp ssh tut h1 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h1 --cmd "sudo ifconfig swp1.57 11.0.0.1/24"
+
+simp ssh tut h2 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h2 --cmd "sudo ifconfig swp1.57 11.0.0.2/24"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
diff --git a/tests/rocker/bridge-vlan-stp b/tests/rocker/bridge-vlan-stp
new file mode 100755
index 0000000..77ab67e
--- /dev/null
+++ b/tests/rocker/bridge-vlan-stp
@@ -0,0 +1,69 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo brctl stp br0 on"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+# turn on vlan filtering on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd 
of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+simp ssh tut sw1 --cmd "echo 1 | sudo dd 
of=/sys/class/net/br0/bridge/vlan_filtering 2> /dev/null"
+
+# add both ports to VLAN 57
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp1 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp2 master"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# turn on learning in HW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning on self"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning on self"
+
+# config IP on host VLANs
+
+simp ssh tut h1 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h1 --cmd "sudo ifconfig swp1.57 11.0.0.1/24"
+
+simp ssh tut h2 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h2 --cmd "sudo ifconfig swp1.57 11.0.0.2/24"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -w 1 -c1 11.0.0.2 >/dev/null"
+if [ $? -eq 0 ]; then exit 1; fi
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
diff --git a/tests/rocker/port b/tests/rocker/port
new file mode 100755
index 0000000..3437f7d
--- /dev/null
+++ b/tests/rocker/port
@@ -0,0 +1,22 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; 
done
+
+# bring up DUT ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 12.0.0.1/24"
+
+# config IP on hosts
+
+simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 12.0.0.2/24"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -c10 11.0.0.1 >/dev/null"
+if [ $? -eq 1 ]; then exit 1; fi
+simp ssh tut h2 --cmd "ping -c10 12.0.0.1 >/dev/null"
diff --git a/tests/rocker/tut.dot b/tests/rocker/tut.dot
new file mode 100644
index 0000000..87f7266
--- /dev/null
+++ b/tests/rocker/tut.dot
@@ -0,0 +1,8 @@
+graph G {
+       graph [hostidtype="hostname", version="1:0", date="04/12/2013"];
+       edge [dir=none, notify="log"];
+       sw1:swp1 -- h1:swp1;
+       sw1:swp2 -- h2:swp1;
+       sw1:swp3 -- h3:swp1;
+       sw1:swp4 -- h4:swp1;
+}
-- 
2.1.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]