qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 2/2] block: align bounce buffers to page


From: Denis V. Lunev
Subject: [Qemu-devel] [PATCH 2/2] block: align bounce buffers to page
Date: Tue, 12 May 2015 08:47:59 +0300

The following sequence
    int fd = open(argv[1], O_RDWR | O_CREAT | O_DIRECT, 0644);
    for (i = 0; i < 100000; i++)
            write(fd, buf, 4096);
performs 5% better if buf is aligned to 4096 bytes.

The difference is quite reliable.

On the other hand we do not want at the moment to enforce bounce
buffering if guest request is aligned to 512 bytes.

The patch changes default bounce buffer optimal alignment to
MAX(page size, 4k). 4k is chosen as maximal known sector size on real
HDD.

The justification of the performance improve is quite interesting.
>From the kernel point of view each request to the disk was split
by two. This could be seen by blktrace like this:
  9,0   11  1     0.000000000 11151  Q  WS 312737792 + 1023 [qemu-img]
  9,0   11  2     0.000007938 11151  Q  WS 312738815 + 8 [qemu-img]
  9,0   11  3     0.000030735 11151  Q  WS 312738823 + 1016 [qemu-img]
  9,0   11  4     0.000032482 11151  Q  WS 312739839 + 8 [qemu-img]
  9,0   11  5     0.000041379 11151  Q  WS 312739847 + 1016 [qemu-img]
  9,0   11  6     0.000042818 11151  Q  WS 312740863 + 8 [qemu-img]
  9,0   11  7     0.000051236 11151  Q  WS 312740871 + 1017 [qemu-img]
  9,0    5  1     0.169071519 11151  Q  WS 312741888 + 1023 [qemu-img]
After the patch the pattern becomes normal:
  9,0    6  1     0.000000000 12422  Q  WS 314834944 + 1024 [qemu-img]
  9,0    6  2     0.000038527 12422  Q  WS 314835968 + 1024 [qemu-img]
  9,0    6  3     0.000072849 12422  Q  WS 314836992 + 1024 [qemu-img]
  9,0    6  4     0.000106276 12422  Q  WS 314838016 + 1024 [qemu-img]
and the amount of requests sent to disk (could be calculated counting
number of lines in the output of blktrace) is reduced about 2 times.

Both qemu-img and qemu-io are affected while qemu-kvm is not. The guest
does his job well and real requests comes properly aligned (to page).

Signed-off-by: Denis V. Lunev <address@hidden>
CC: Paolo Bonzini <address@hidden>
CC: Kevin Wolf <address@hidden>
CC: Stefan Hajnoczi <address@hidden>
---
 block.c           |  8 ++++----
 block/io.c        |  2 +-
 block/raw-posix.c | 14 ++++++++------
 3 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/block.c b/block.c
index e293907..325f727 100644
--- a/block.c
+++ b/block.c
@@ -106,8 +106,8 @@ int is_windows_drive(const char *filename)
 size_t bdrv_opt_mem_align(BlockDriverState *bs)
 {
     if (!bs || !bs->drv) {
-        /* 4k should be on the safe side */
-        return 4096;
+        /* page size or 4k (hdd sector size) should be on the safe side */
+        return MAX(4096, getpagesize());
     }
 
     return bs->bl.opt_mem_alignment;
@@ -116,8 +116,8 @@ size_t bdrv_opt_mem_align(BlockDriverState *bs)
 size_t bdrv_min_mem_align(BlockDriverState *bs)
 {
     if (!bs || !bs->drv) {
-        /* 4k should be on the safe side */
-        return 4096;
+        /* page size or 4k (hdd sector size) should be on the safe side */
+        return MAX(4096, getpagesize());
     }
 
     return bs->bl.min_mem_alignment;
diff --git a/block/io.c b/block/io.c
index 908a3d1..071652c 100644
--- a/block/io.c
+++ b/block/io.c
@@ -205,7 +205,7 @@ void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
         bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
     } else {
         bs->bl.min_mem_alignment = 512;
-        bs->bl.opt_mem_alignment = 512;
+        bs->bl.opt_mem_alignment = getpagesize();
     }
 
     if (bs->backing_hd) {
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 7083924..04f3d4e 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -301,6 +301,7 @@ static void raw_probe_alignment(BlockDriverState *bs, int 
fd, Error **errp)
 {
     BDRVRawState *s = bs->opaque;
     char *buf;
+    size_t max_align = MAX(MAX_BLOCKSIZE, getpagesize());
 
     /* For /dev/sg devices the alignment is not really used.
        With buffered I/O, we don't have any restrictions. */
@@ -330,9 +331,9 @@ static void raw_probe_alignment(BlockDriverState *bs, int 
fd, Error **errp)
     /* If we could not get the sizes so far, we can only guess them */
     if (!s->buf_align) {
         size_t align;
-        buf = qemu_memalign(MAX_BLOCKSIZE, 2 * MAX_BLOCKSIZE);
-        for (align = 512; align <= MAX_BLOCKSIZE; align <<= 1) {
-            if (raw_is_io_aligned(fd, buf + align, MAX_BLOCKSIZE)) {
+        buf = qemu_memalign(max_align, 2 * max_align);
+        for (align = 512; align <= max_align; align <<= 1) {
+            if (raw_is_io_aligned(fd, buf + align, max_align)) {
                 s->buf_align = align;
                 break;
             }
@@ -342,8 +343,8 @@ static void raw_probe_alignment(BlockDriverState *bs, int 
fd, Error **errp)
 
     if (!bs->request_alignment) {
         size_t align;
-        buf = qemu_memalign(s->buf_align, MAX_BLOCKSIZE);
-        for (align = 512; align <= MAX_BLOCKSIZE; align <<= 1) {
+        buf = qemu_memalign(s->buf_align, max_align);
+        for (align = 512; align <= max_align; align <<= 1) {
             if (raw_is_io_aligned(fd, buf, align)) {
                 bs->request_alignment = align;
                 break;
@@ -726,7 +727,9 @@ static void raw_refresh_limits(BlockDriverState *bs, Error 
**errp)
 
     raw_probe_alignment(bs, s->fd, errp);
     bs->bl.min_mem_alignment = s->buf_align;
-    bs->bl.opt_mem_alignment = s->buf_align;
+    if (bs->bl.min_mem_alignment > bs->bl.opt_mem_alignment) {
+        bs->bl.opt_mem_alignment = bs->bl.min_mem_alignment;
+    }
 }
 
 static int check_for_dasd(int fd)
-- 
1.9.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]