[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PULL 15/28] migration: create new section to store glo
From: |
Juan Quintela |
Subject: |
Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state |
Date: |
Wed, 08 Jul 2015 13:10:59 +0200 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/24.5 (gnu/linux) |
Christian Borntraeger <address@hidden> wrote:
> Am 07.07.2015 um 15:08 schrieb Juan Quintela:
>> This includes a new section that for now just stores the current qemu state.
>>
>> Right now, there are only one way to control what is the state of the
>> target after migration.
>>
>> - If you run the target qemu with -S, it would start stopped.
>> - If you run the target qemu without -S, it would run just after
>> migration finishes.
>>
>> The problem here is what happens if we start the target without -S and
>> there happens one error during migration that puts current state as
>> -EIO. Migration would ends (notice that the error happend doing block
>> IO, network IO, i.e. nothing related with migration), and when
>> migration finish, we would just "continue" running on destination,
>> probably hanging the guest/corruption data, whatever.
>>
>> Signed-off-by: Juan Quintela <address@hidden>
>> Reviewed-by: Dr. David Alan Gilbert <address@hidden>
>
> This is bisected to cause a regression on s390.
>
> A guest restarts (booting) after managedsave/start instead of continuing.
>
> Do you have any idea what might be wrong?
managedsaved is basically:
migrate_set_speed INT64_MAX
migrate to fd
So it makes exactly zero sense that it is failing.
That it fails only on s390 is even weirder, because this patch just add
a new section, nothing more, nothing else. If you are running the same
binary on both sides, it should just be ok.
Do you have a trace/log of how it fails?
Thanks, Juan.
>
>> ---
>> include/migration/migration.h | 1 +
>> migration/migration.c | 105
>> +++++++++++++++++++++++++++++++++++++++---
>> trace-events | 3 ++
>> vl.c | 1 +
>> 4 files changed, 103 insertions(+), 7 deletions(-)
>>
>> diff --git a/include/migration/migration.h b/include/migration/migration.h
>> index afba233..86df6cc 100644
>> --- a/include/migration/migration.h
>> +++ b/include/migration/migration.h
>> @@ -197,4 +197,5 @@ size_t ram_control_save_page(QEMUFile *f, ram_addr_t
>> block_offset,
>>
>> void ram_mig_init(void);
>> void savevm_skip_section_footers(void);
>> +void register_global_state(void);
>> #endif
>> diff --git a/migration/migration.c b/migration/migration.c
>> index c6ac08a..5e436f7 100644
>> --- a/migration/migration.c
>> +++ b/migration/migration.c
>> @@ -26,6 +26,7 @@
>> #include "qemu/thread.h"
>> #include "qmp-commands.h"
>> #include "trace.h"
>> +#include "qapi/util.h"
>>
>> #define MAX_THROTTLE (32 << 20) /* Migration speed throttling */
>>
>> @@ -97,6 +98,83 @@ void migration_incoming_state_destroy(void)
>> mis_current = NULL;
>> }
>>
>> +
>> +typedef struct {
>> + uint32_t size;
>> + uint8_t runstate[100];
>> +} GlobalState;
>> +
>> +static GlobalState global_state;
>> +
>> +static int global_state_store(void)
>> +{
>> + if (!runstate_store((char *)global_state.runstate,
>> + sizeof(global_state.runstate))) {
>> + error_report("runstate name too big: %s", global_state.runstate);
>> + trace_migrate_state_too_big();
>> + return -EINVAL;
>> + }
>> + return 0;
>> +}
>> +
>> +static char *global_state_get_runstate(void)
>> +{
>> + return (char *)global_state.runstate;
>> +}
>> +
>> +static int global_state_post_load(void *opaque, int version_id)
>> +{
>> + GlobalState *s = opaque;
>> + int ret = 0;
>> + char *runstate = (char *)s->runstate;
>> +
>> + trace_migrate_global_state_post_load(runstate);
>> +
>> + if (strcmp(runstate, "running") != 0) {
>> + Error *local_err = NULL;
>> + int r = qapi_enum_parse(RunState_lookup, runstate, RUN_STATE_MAX,
>> + -1, &local_err);
>> +
>> + if (r == -1) {
>> + if (local_err) {
>> + error_report_err(local_err);
>> + }
>> + return -EINVAL;
>> + }
>> + ret = vm_stop_force_state(r);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static void global_state_pre_save(void *opaque)
>> +{
>> + GlobalState *s = opaque;
>> +
>> + trace_migrate_global_state_pre_save((char *)s->runstate);
>> + s->size = strlen((char *)s->runstate) + 1;
>> +}
>> +
>> +static const VMStateDescription vmstate_globalstate = {
>> + .name = "globalstate",
>> + .version_id = 1,
>> + .minimum_version_id = 1,
>> + .post_load = global_state_post_load,
>> + .pre_save = global_state_pre_save,
>> + .fields = (VMStateField[]) {
>> + VMSTATE_UINT32(size, GlobalState),
>> + VMSTATE_BUFFER(runstate, GlobalState),
>> + VMSTATE_END_OF_LIST()
>> + },
>> +};
>> +
>> +void register_global_state(void)
>> +{
>> + /* We would use it independently that we receive it */
>> + strcpy((char *)&global_state.runstate, "");
>> + vmstate_register(NULL, 0, &vmstate_globalstate, &global_state);
>> +}
>> +
>> /*
>> * Called on -incoming with a defer: uri.
>> * The migration can be started later after any parameters have been
>> @@ -164,10 +242,20 @@ static void process_incoming_migration_co(void *opaque)
>> exit(EXIT_FAILURE);
>> }
>>
>> - if (autostart) {
>> + /* runstate == "" means that we haven't received it through the
>> + * wire, so we obey autostart. runstate == runing means that we
>> + * need to run it, we need to make sure that we do it after
>> + * everything else has finished. Every other state change is done
>> + * at the post_load function */
>> +
>> + if (strcmp(global_state_get_runstate(), "running") == 0) {
>> vm_start();
>> - } else {
>> - runstate_set(RUN_STATE_PAUSED);
>> + } else if (strcmp(global_state_get_runstate(), "") == 0) {
>> + if (autostart) {
>> + vm_start();
>> + } else {
>> + runstate_set(RUN_STATE_PAUSED);
>> + }
>> }
>> migrate_decompress_threads_join();
>> }
>> @@ -793,10 +881,13 @@ static void *migration_thread(void *opaque)
>> qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
>> old_vm_running = runstate_is_running();
>>
>> - ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
>> - if (ret >= 0) {
>> - qemu_file_set_rate_limit(s->file, INT64_MAX);
>> - qemu_savevm_state_complete(s->file);
>> + ret = global_state_store();
>> + if (!ret) {
>> + ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
>> + if (ret >= 0) {
>> + qemu_file_set_rate_limit(s->file, INT64_MAX);
>> + qemu_savevm_state_complete(s->file);
>> + }
>> }
>> qemu_mutex_unlock_iothread();
>>
>> diff --git a/trace-events b/trace-events
>> index a38dd2e..c0111d0 100644
>> --- a/trace-events
>> +++ b/trace-events
>> @@ -1403,6 +1403,9 @@ migrate_fd_error(void) ""
>> migrate_fd_cancel(void) ""
>> migrate_pending(uint64_t size, uint64_t max) "pending size %" PRIu64 " max
>> %" PRIu64
>> migrate_transferred(uint64_t tranferred, uint64_t time_spent, double
>> bandwidth, uint64_t size) "transferred %" PRIu64 " time_spent %" PRIu64 "
>> bandwidth %g max_size %" PRId64
>> +migrate_state_too_big(void) ""
>> +migrate_global_state_post_load(const char *state) "loaded state: %s"
>> +migrate_global_state_pre_save(const char *state) "saved state: %s"
>>
>> # migration/rdma.c
>> qemu_rdma_accept_incoming_migration(void) ""
>> diff --git a/vl.c b/vl.c
>> index 19a8737..cfa6133 100644
>> --- a/vl.c
>> +++ b/vl.c
>> @@ -4624,6 +4624,7 @@ int main(int argc, char **argv, char **envp)
>> return 0;
>> }
>>
>> + register_global_state();
>> if (incoming) {
>> Error *local_err = NULL;
>> qemu_start_incoming_migration(incoming, &local_err);
>>
- [Qemu-devel] [PULL 16/28] global_state: Make section optional, (continued)
- [Qemu-devel] [PULL 16/28] global_state: Make section optional, Juan Quintela, 2015/07/07
- [Qemu-devel] [PULL 13/28] runstate: Add runstate store, Juan Quintela, 2015/07/07
- [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Juan Quintela, 2015/07/07
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Christian Borntraeger, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Dr. David Alan Gilbert, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Christian Borntraeger, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Christian Borntraeger, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Dr. David Alan Gilbert, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Christian Borntraeger, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Dr. David Alan Gilbert, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state,
Juan Quintela <=
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Juan Quintela, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Christian Borntraeger, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Juan Quintela, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Christian Borntraeger, 2015/07/08
- Re: [Qemu-devel] [PULL 15/28] migration: create new section to store global state, Juan Quintela, 2015/07/08
[Qemu-devel] [PULL 14/28] runstate: migration allows more transitions now, Juan Quintela, 2015/07/07