[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [kvm-unit-tests PATCHv4 2/3] arm: pmu: Check cycle coun
From: |
Andrew Jones |
Subject: |
Re: [Qemu-devel] [kvm-unit-tests PATCHv4 2/3] arm: pmu: Check cycle count increases |
Date: |
Sun, 18 Oct 2015 20:10:31 +0200 |
User-agent: |
Mutt/1.5.23.1 (2014-03-12) |
On Mon, Oct 12, 2015 at 11:07:49AM -0400, Christopher Covington wrote:
> Ensure that reads of the PMCCNTR_EL0 are monotonically increasing,
> even for the smallest delta of two subsequent reads.
>
> Signed-off-by: Christopher Covington <address@hidden>
> ---
> arm/pmu.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/arm/pmu.c b/arm/pmu.c
> index 42d0ee1..ae81970 100644
> --- a/arm/pmu.c
> +++ b/arm/pmu.c
> @@ -14,6 +14,8 @@
> */
> #include "libcflat.h"
>
> +#define NR_SAMPLES 10
> +
> #if defined(__arm__)
> static inline uint32_t get_pmcr(void)
> {
> @@ -22,6 +24,19 @@ static inline uint32_t get_pmcr(void)
> asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (ret));
> return ret;
> }
> +
> +static inline void set_pmcr(uint32_t pmcr)
> +{
> + asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (pmcr));
> +}
> +
> +static inline unsigned long get_pmccntr(void)
> +{
> + unsigned long cycles;
> +
> + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (cycles));
> + return cycles;
This is a 64-bit register, even for arm, but I guess there's no
need to access more than 32-bits using mrrc?
> +}
> #elif defined(__aarch64__)
> static inline uint32_t get_pmcr(void)
> {
> @@ -30,6 +45,19 @@ static inline uint32_t get_pmcr(void)
> asm volatile("mrs %0, pmcr_el0" : "=r" (ret));
> return ret;
> }
> +
> +static inline void set_pmcr(uint32_t pmcr)
> +{
> + asm volatile("msr pmcr_el0, %0" : : "r" (pmcr));
> +}
> +
> +static inline unsigned long get_pmccntr(void)
> +{
> + unsigned long cycles;
> +
> + asm volatile("mrs %0, pmccntr_el0" : "=r" (cycles));
> + return cycles;
> +}
> #endif
>
> struct pmu_data {
> @@ -72,11 +100,37 @@ static bool check_pmcr(void)
> return pmu.implementer != 0;
> }
>
> +/*
> + * Ensure that the cycle counter progresses between back-to-back reads.
> + */
> +static bool check_cycles_increase(void)
> +{
> + struct pmu_data pmu;
> +
> + pmu.enable = 1;
> + set_pmcr(pmu.pmcr_el0);
You need to zero pmu out first, it's just random stack junk except
for 'enable' definitely being 1 at this point.
> +
> + for (int i = 0; i < NR_SAMPLES; i++) {
> + unsigned long a, b;
> +
> + a = get_pmccntr();
> + b = get_pmccntr();
> +
> + if (a >= b) {
> + printf("Read %ld then %ld.\n", a, b);
> + return false;
> + }
> + }
> +
> + return true;
> +}
> +
> int main(void)
> {
> report_prefix_push("pmu");
>
> report("Control register", check_pmcr());
> + report("Monotonically increasing cycle count", check_cycles_increase());
>
> return report_summary();
> }
> --
> Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
>
- [Qemu-devel] [kvm-unit-tests PATCHv3 3/3] arm: pmu: Add CPI checking, (continued)
- [Qemu-devel] [kvm-unit-tests PATCHv3 2/3] arm: pmu: Check cycle count increases, Christopher Covington, 2015/10/08
- Re: [Qemu-devel] [kvm-unit-tests PATCHv3 2/3] arm: pmu: Check cycle count increases, Andrew Jones, 2015/10/08
- [Qemu-devel] [kvm-unit-tests PATCHv3 1/3] arm: Add PMU test, Christopher Covington, 2015/10/08
- Re: [Qemu-devel] [kvm-unit-tests PATCHv3 1/3] arm: Add PMU test, Andrew Jones, 2015/10/08
- [Qemu-devel] [kvm-unit-tests PATCHv4] ARM PMU tests, Christopher Covington, 2015/10/15
- [Qemu-devel] [kvm-unit-tests PATCHv4 1/3] arm: Add PMU test, Christopher Covington, 2015/10/15
- Re: [Qemu-devel] [kvm-unit-tests PATCHv4 1/3] arm: Add PMU test, Andrew Jones, 2015/10/18
- [Qemu-devel] [kvm-unit-tests PATCHv4 2/3] arm: pmu: Check cycle count increases, Christopher Covington, 2015/10/15
- Re: [Qemu-devel] [kvm-unit-tests PATCHv4 2/3] arm: pmu: Check cycle count increases,
Andrew Jones <=
- [Qemu-devel] [kvm-unit-tests PATCHv4 3/3] arm: pmu: Add CPI checking, Christopher Covington, 2015/10/15
- Re: [Qemu-devel] [kvm-unit-tests PATCHv4 3/3] arm: pmu: Add CPI checking, Andrew Jones, 2015/10/18
- Re: [Qemu-devel] [kvm-unit-tests PATCHv4 3/3] arm: pmu: Add CPI checking, Christopher Covington, 2015/10/19
- Re: [Qemu-devel] [kvm-unit-tests PATCHv4 3/3] arm: pmu: Add CPI checking, Andrew Jones, 2015/10/26
- Re: [Qemu-devel] [kvm-unit-tests PATCHv4] ARM PMU tests, Andrew Jones, 2015/10/18
- [Qemu-devel] [kvm-unit-tests PATCHv5] ARM PMU tests, Christopher Covington, 2015/10/26
- [Qemu-devel] [kvm-unit-tests PATCHv5 1/3] arm: Add PMU test, Christopher Covington, 2015/10/26
- [Qemu-devel] [kvm-unit-tests PATCHv5 2/3] arm: pmu: Check cycle count increases, Christopher Covington, 2015/10/26
- Re: [Qemu-devel] [kvm-unit-tests PATCHv5 2/3] arm: pmu: Check cycle count increases, Andrew Jones, 2015/10/26
- Re: [Qemu-devel] [kvm-unit-tests PATCHv5 2/3] arm: pmu: Check cycle count increases, Christopher Covington, 2015/10/26