[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] pci: Adjust PCI config limit based on bus topology
From: |
Alex Williamson |
Subject: |
[Qemu-devel] [PATCH] pci: Adjust PCI config limit based on bus topology |
Date: |
Thu, 22 Oct 2015 17:07:11 -0600 |
User-agent: |
StGit/0.17.1-dirty |
A conventional PCI bus does not support config space accesses above
the standard 256 byte configuration space. PCIe-to-PCI bridges are
not permitted to forward transactions if the extended register address
field is non-zero and must handle it as an unsupported request (PCIe
bridge spec rev 1.0, 4.1.3, 4.1.4). Therefore, we should not support
extended config space if there is a conventional bus anywhere on the
path to a device.
Signed-off-by: Alex Williamson <address@hidden>
---
hw/pci/pci_host.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/hw/pci/pci_host.c b/hw/pci/pci_host.c
index 3e26f92..b6846ee 100644
--- a/hw/pci/pci_host.c
+++ b/hw/pci/pci_host.c
@@ -19,6 +19,7 @@
*/
#include "hw/pci/pci.h"
+#include "hw/pci/pci_bridge.h"
#include "hw/pci/pci_host.h"
#include "trace.h"
@@ -48,9 +49,29 @@ static inline PCIDevice *pci_dev_find_by_addr(PCIBus *bus,
uint32_t addr)
return pci_find_device(bus, bus_num, devfn);
}
+static void pci_adjust_config_limit(PCIBus *bus, uint32_t *limit)
+{
+ if (*limit > PCI_CONFIG_SPACE_SIZE) {
+ if (!pci_bus_is_express(bus)) {
+ *limit = PCI_CONFIG_SPACE_SIZE;
+ return;
+ }
+
+ if (!pci_bus_is_root(bus)) {
+ PCIDevice *bridge = pci_bridge_get_device(bus);
+ pci_adjust_config_limit(bridge->bus, limit);
+ }
+ }
+}
+
void pci_host_config_write_common(PCIDevice *pci_dev, uint32_t addr,
uint32_t limit, uint32_t val, uint32_t len)
{
+ pci_adjust_config_limit(pci_dev->bus, &limit);
+ if (limit <= addr) {
+ return;
+ }
+
assert(len <= 4);
trace_pci_cfg_write(pci_dev->name, PCI_SLOT(pci_dev->devfn),
PCI_FUNC(pci_dev->devfn), addr, val);
@@ -62,6 +83,11 @@ uint32_t pci_host_config_read_common(PCIDevice *pci_dev,
uint32_t addr,
{
uint32_t ret;
+ pci_adjust_config_limit(pci_dev->bus, &limit);
+ if (limit <= addr) {
+ return ~0x0;
+ }
+
assert(len <= 4);
ret = pci_dev->config_read(pci_dev, addr, MIN(len, limit - addr));
trace_pci_cfg_read(pci_dev->name, PCI_SLOT(pci_dev->devfn),
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [PATCH] pci: Adjust PCI config limit based on bus topology,
Alex Williamson <=