Re: [Qemu-devel] [PATCH 0/6] Add i.MX6 (Single/Dual/Quad) support

[Peter Maydell]

On 26 January 2016 at 21:44, Jean-Christophe Dubois <address@hidden> wrote:
> This patch series adds support for the Freescale i.MX6 processor.
>
> For now we only support the following devices:
> * up to 4 Cortex A9 cores
> * A9 MPCORE (SCU, GIC, TWD)
> * 5 i.MX UARTs
> * 2 EPIT timers
> * 1 GPT timer
> * 7 GPIO controllers
> * 6 SDHC controllers
> * 1 CCM device
> * 1 SRC device
> * various ROM/RAM areas.
>
> This also adds the sabrelite board as a an actual platform for i.MX6.
>
> This series was tested by booting a 4.4 linux kernel (using the
> imx_v6_v7_defconfig file as kernel configuration).
>
> Note: In order for Linux to work I had to customize a bit the
> arch/arm/boot/dts/imx6qdl-sabrelite.dtsi device tree file.

What changes did you have to make to the dt, and why?

thanks
-- PMM