[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v8 0/5] add ACPI node for fw_cfg on pc and arm
From: |
Gabriel L. Somlo |
Subject: |
Re: [Qemu-devel] [PATCH v8 0/5] add ACPI node for fw_cfg on pc and arm |
Date: |
Tue, 16 Feb 2016 18:49:59 -0500 |
User-agent: |
Mutt/1.5.24 (2015-08-30) |
On Thu, Feb 11, 2016 at 05:06:00PM -0500, Gabriel L. Somlo wrote:
> Generate an ACPI DSDT node for fw_cfg on pc and arm guests.
>
> New since v7:
>
> - edited commit blurb on 3/5 to match updated content, i.e. that
> the ACPI node is now inserted into the DSDT (no longer the SSDT).
> (Thanks to Igor Mammedov for catching that!)
BTW, regarding Igor's question about Windows starting to search for a
driver: Just for grins, I installed Windows 10 (with qemu git master
*before* this series was applied). Then, after applying the series,
DeviceManager was happy and had no unknown hardware listed.
Only after setting the fw_cfg _STA to 0x0F did I get an unknown device
like so: http://imagebin.ca/v/2XDUfONVF3bY
So, on XP, Windows 7, and Windows 10, the fw_cfg device showing up in
ACPI with a _STA set to 0x0B will *NOT* prompt the device manager to
start making trouble :)
Thanks,
--Gabriel
> >New since v6:
> > - rebased to fit on top of fb306ff and f264d36, which moved things
> > around in pc's acpi-build.c (only patch 3/5 affected);
> > - kernel-side fw_cfg sysfs driver accepted into upstream linux
> >
> >>New since v5:
> >>
> >> - rebased on top of latest QEMU git master
> >>
> >>>New since v4:
> >>>
> >>> - rebased on top of Marc's DMA series
> >>> - drop machine compat dependency for insertion into x86/ssdt
> >>> (patch 3/5), following agreement between Igor and Eduardo
> >>> - [mm]io register range now covers DMA register as well, if
> >>> available.
> >>> - s/bios/firmware in doc file updates
> >>>
> >>>>New since v3:
> >>>>
> >>>> - rebased to work on top of 87e896ab (introducing pc-*-25 classes),
> >>>> inserting fw_cfg acpi node only for machines >= 2.5.
> >>>>
> >>>> - reintroduce _STA with value 0x0B (bit 2 for u/i visibility turned
> >>>> off to avoid Windows complaining -- thanks Igor for catching that!)
> >>>>
> >>>>If there's any other feedback besides questions regarding the
> >>>>appropriateness of "QEMU0002" as the value of _HID, please don't hesitate!
> >>>>
> >>>>>New since v2:
> >>>>>
> >>>>> - pc/i386 node in ssdt only on machine types *newer* than 2.4
> >>>>> (as suggested by Eduardo)
> >>>>>
> >>>>>I appreciate any further comments and reviews. Hopefully we can make
> >>>>>this palatable for upstream, modulo the lingering concerns about whether
> >>>>>"QEMU0002" is ok to use as the value of _HID, which I'll hopefully get
> >>>>>sorted out with the kernel crew...
> >>>>>
> >>>>>>New since v1:
> >>>>>>
> >>>>>> - expose control register size (suggested by Marc MarĂ)
> >>>>>>
> >>>>>> - leaving out _UID and _STA fields (thanks Shannon & Igor)
> >>>>>>
> >>>>>> - using "QEMU0002" as the value of _HID (thanks Michael)
> >>>>>>
> >>>>>> - added documentation blurb to docs/specs/fw_cfg.txt
> >>>>>> (mainly to record usage of the "QEMU0002" string with fw_cfg).
> >>>>>>
> >>>>>>> This series adds a fw_cfg device node to the SSDT (on pc), or to the
> >>>>>>> DSDT (on arm).
> >>>>>>>
> >>>>>>> - Patch 1/3 moves (and renames) the BIOS_CFG_IOPORT (0x510)
> >>>>>>> define from pc.c to pc.h, so that it could be used from
> >>>>>>> acpi-build.c in patch 2/3.
> >>>>>>>
> >>>>>>> - Patch 2/3 adds a fw_cfg node to the pc SSDT.
> >>>>>>>
> >>>>>>> - Patch 3/3 adds a fw_cfg node to the arm DSDT.
> >>>>>>>
> >>>>>>> I made up some names - "FWCF" for the node name, and "FWCF0001"
> >>>>>>> for _HID; no idea whether that's appropriate, or how else I should
> >>>>>>> figure out what to use instead...
> >>>>>>>
> >>>>>>> Also, using scope "\\_SB", based on where fw_cfg shows up in the
> >>>>>>> output of "info qtree". Again, if that's wrong, please point me in
> >>>>>>> the right direction.
> >>>>>>>
> >>>>>>> Re. 3/3 (also mentioned after the commit blurb in the patch itself),
> >>>>>>> I noticed none of the other DSDT entries contain a _STA field,
> >>>>>>> wondering
> >>>>>>> why it would (not) make sense to include that, same as on the PC.
>
> Gabriel L. Somlo (5):
> fw_cfg: expose control register size in fw_cfg.h
> pc: fw_cfg: move ioport base constant to pc.h
> acpi: pc: add fw_cfg device node to dsdt
> acpi: arm: add fw_cfg device node to dsdt
> fw_cfg: document ACPI device node information
>
> docs/specs/fw_cfg.txt | 9 +++++++++
> hw/arm/virt-acpi-build.c | 15 +++++++++++++++
> hw/i386/acpi-build.c | 29 +++++++++++++++++++++++++++++
> hw/i386/pc.c | 5 ++---
> hw/nvram/fw_cfg.c | 4 +++-
> include/hw/i386/pc.h | 2 ++
> include/hw/nvram/fw_cfg.h | 3 +++
> 7 files changed, 63 insertions(+), 4 deletions(-)
>
> --
> 2.4.3
>
- [Qemu-devel] [PATCH v8 0/5] add ACPI node for fw_cfg on pc and arm, Gabriel L. Somlo, 2016/02/11
- [Qemu-devel] [PATCH v8 3/5] acpi: pc: add fw_cfg device node to dsdt, Gabriel L. Somlo, 2016/02/11
- [Qemu-devel] [PATCH v8 2/5] pc: fw_cfg: move ioport base constant to pc.h, Gabriel L. Somlo, 2016/02/11
- [Qemu-devel] [PATCH v8 1/5] fw_cfg: expose control register size in fw_cfg.h, Gabriel L. Somlo, 2016/02/11
- [Qemu-devel] [PATCH v8 5/5] fw_cfg: document ACPI device node information, Gabriel L. Somlo, 2016/02/11
- [Qemu-devel] [PATCH v8 4/5] acpi: arm: add fw_cfg device node to dsdt, Gabriel L. Somlo, 2016/02/11
- Re: [Qemu-devel] [PATCH v8 0/5] add ACPI node for fw_cfg on pc and arm,
Gabriel L. Somlo <=