[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH COLO-Frame v15 21/38] qmp event: Add COLO_EXIT event
From: |
zhanghailiang |
Subject: |
[Qemu-devel] [PATCH COLO-Frame v15 21/38] qmp event: Add COLO_EXIT event to notify users while exited from COLO |
Date: |
Mon, 22 Feb 2016 10:40:15 +0800 |
If some errors happen during VM's COLO FT stage, it's important to notify the
users
of this event. Together with 'x_colo_lost_heartbeat', users can intervene in
COLO's
failover work immediately.
If users don't want to get involved in COLO's failover verdict,
it is still necessary to notify users that we exited COLO mode.
Cc: Markus Armbruster <address@hidden>
Cc: Michael Roth <address@hidden>
Signed-off-by: zhanghailiang <address@hidden>
Signed-off-by: Li Zhijian <address@hidden>
---
v13:
- Remove optional 'error' string for this event.
(I doubted it was usefull for users, Since users shouldn't
interpret it and can't depend on it to decide what happened
exaclty. Besides it is really hard to organize.)
- Remove unused 'unknown' member for enum COLOExitReason.
(Eric's suggestion)
- Fix comment for COLO_EXIT
v11:
- Fix several typos found by Eric
---
docs/qmp-events.txt | 16 ++++++++++++++++
migration/colo.c | 20 ++++++++++++++++++++
qapi-schema.json | 14 ++++++++++++++
qapi/event.json | 15 +++++++++++++++
4 files changed, 65 insertions(+)
diff --git a/docs/qmp-events.txt b/docs/qmp-events.txt
index 52eb7e2..b6e8937 100644
--- a/docs/qmp-events.txt
+++ b/docs/qmp-events.txt
@@ -184,6 +184,22 @@ Example:
Note: The "ready to complete" status is always reset by a BLOCK_JOB_ERROR
event.
+COLO_EXIT
+---------
+
+Emitted when VM finishes COLO mode due to some errors happening or
+at the request of users.
+
+Data:
+
+ - "mode": COLO mode, primary or secondary side (json-string)
+ - "reason": the exit reason, internal error or external request. (json-string)
+
+Example:
+
+{"timestamp": {"seconds": 2032141960, "microseconds": 417172},
+ "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
+
DEVICE_DELETED
--------------
diff --git a/migration/colo.c b/migration/colo.c
index a65b22b..814480c 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -17,6 +17,7 @@
#include "trace.h"
#include "qemu/error-report.h"
#include "migration/failover.h"
+#include "qapi-event.h"
/* colo buffer */
#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
@@ -367,6 +368,18 @@ out:
if (local_err) {
error_report_err(local_err);
}
+ /*
+ * There are only two reasons we can go here, something error happened,
+ * Or users triggered failover.
+ */
+ if (!failover_request_is_active()) {
+ qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
+ COLO_EXIT_REASON_ERROR, NULL);
+ } else {
+ qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
+ COLO_EXIT_REASON_REQUEST, NULL);
+ }
+
qsb_free(buffer);
buffer = NULL;
@@ -530,6 +543,13 @@ out:
if (local_err) {
error_report_err(local_err);
}
+ if (!failover_request_is_active()) {
+ qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
+ COLO_EXIT_REASON_ERROR, NULL);
+ } else {
+ qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
+ COLO_EXIT_REASON_REQUEST, NULL);
+ }
if (fb) {
qemu_fclose(fb);
diff --git a/qapi-schema.json b/qapi-schema.json
index 73325ed..7fec696 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -776,6 +776,20 @@
'data': [ 'unknown', 'primary', 'secondary'] }
##
+# @COLOExitReason
+#
+# The reason for a COLO exit
+#
+# @request: COLO exit is due to an external request
+#
+# @error: COLO exit is due to an internal error
+#
+# Since: 2.6
+##
+{ 'enum': 'COLOExitReason',
+ 'data': [ 'request', 'error' ] }
+
+##
# @x-colo-lost-heartbeat
#
# Tell qemu that heartbeat is lost, request it to do takeover procedures.
diff --git a/qapi/event.json b/qapi/event.json
index 390fd45..cfcc887 100644
--- a/qapi/event.json
+++ b/qapi/event.json
@@ -268,6 +268,21 @@
'data': { 'pass': 'int' } }
##
+# @COLO_EXIT
+#
+# Emitted when VM finishes COLO mode due to some errors happening or
+# at the request of users.
+#
+# @mode: which COLO mode the VM was in when it exited.
+#
+# @reason: describes the reason for the COLO exit.
+#
+# Since: 2.6
+##
+{ 'event': 'COLO_EXIT',
+ 'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
+
+##
# @ACPI_DEVICE_OST
#
# Emitted when guest executes ACPI _OST method.
--
1.8.3.1
- [Qemu-devel] [PATCH COLO-Frame v15 30/38] COLO: Split qemu_savevm_state_begin out of checkpoint process, (continued)
- [Qemu-devel] [PATCH COLO-Frame v15 30/38] COLO: Split qemu_savevm_state_begin out of checkpoint process, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 18/38] COLO failover: Introduce state to record failover process, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 24/38] COLO: Process shutdown command for VM in COLO state, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 29/38] COLO: Separate the process of saving/loading ram and device state, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 33/38] net: Add notifier/callback for netdev init, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 13/38] COLO: Load VMState into qsb before restore it, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 32/38] filter-buffer: Accept zero interval, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 35/38] COLO: manage the status of buffer filters for PVM, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 26/38] savevm: Introduce two helper functions for save/find loadvm_handlers entry, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 34/38] COLO/filter: add each netdev a buffer filter, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 21/38] qmp event: Add COLO_EXIT event to notify users while exited from COLO,
zhanghailiang <=
- [Qemu-devel] [PATCH COLO-Frame v15 31/38] net/filter: Add a 'status' property for filter object, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 38/38] COLO: Add block replication into colo process, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 22/38] COLO failover: Shutdown related socket fd when do failover, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 36/38] filter-buffer: make filter_buffer_flush() public, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 37/38] COLO: flush buffered packets in checkpoint process or exit COLO, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 16/38] COLO: synchronize PVM's state to SVM periodically, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 27/38] migration/savevm: Add new helpers to process the different stages of loadvm, zhanghailiang, 2016/02/21
- [Qemu-devel] [PATCH COLO-Frame v15 28/38] migration/savevm: Export two helper functions for savevm process, zhanghailiang, 2016/02/21