|
From: | Nicholas Andre |
Subject: | [Qemu-devel] PCI Passthrough KVM with vfio-pci giving EINVAL on PCI Probe |
Date: | Wed, 24 Feb 2016 20:04:08 +0000 |
I am attempting to attach PCIe devices in passthrough to my KVM domain. I have two devices in one IOMMU group (#28):
03:00.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge
04:00.0 Multimedia audio controller: Texas Instruments TMS320C6414 TMS320C6415 TMS320C6416
and lspci -n
values:
03:00.0 0604: 104c:8240
04:00.0 0401: 104c:a106
Both of which are attached to my KVM domain with managed configuration.
I am running Ubuntu 14.04. I have:
kvm-ok
prints acceleration is all set, VT-d is supported on the chipsetls -l /sys/bus/pci/devices/0000\:03\:00.0/
though it does have a firmware listed.virsh # start rivendell
error: Failed to start domain rivendell
error: Failed to bind PCI device '0000:03:00.0' to vfio-pci: No such device
and under syslog I get what I believe to be the PCIe EINVAL code:
Feb 23 19:46:46 tupac kernel: [ 214.159625] vfio-pci: probe of 0000:03:00.0 failed with error -22
Trying to do this manually: I do this to bind the devices to vfio-pci:
# echo "104c a106" > /sys/bus/pci/drivers/vfio-pci/new_id
# echo "104c 8240" > /sys/bus/pci/drivers/vfio-pci/new_id
Then:
address@hidden:~# echo "0000:03:00.0" > /sys/bus/pci/drivers/vfio-pci/bind
bash: echo: write error: No such device
However, the multimedia controller appears AOK:
address@hidden:~# ls -l /sys/bus/pci/drivers/vfio-pci/
total 0
lrwxrwxrwx 1 root root 0 Feb 24 13:07 0000:04:00.0 -> ../../../../devices/pci0000:00/0000:00:02.2/0000:03:00.0/0000:04:00.0
--w------- 1 root root 4096 Feb 24 13:05 bind
lrwxrwxrwx 1 root root 0 Feb 24 13:07 module -> ../../../../module/vfio_pci
--w------- 1 root root 4096 Feb 24 13:15 new_id
--w------- 1 root root 4096 Feb 23 19:47 remove_id
--w------- 1 root root 4096 Feb 23 19:43 uevent
--w------- 1 root root 4096 Feb 24 13:07 unbind
03:00.0 (which is a PCIe to PCI adapter) is not showing up under vfio-pci
's devices. They're in the same IOMMU group so I don't think I can attach them individually.
What is causing this? Is this some issue with the presence of the regular old PCI bus in the system behind the adapter?
--Nick
[Prev in Thread] | Current Thread | [Next in Thread] |