[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v3 5/8] hcd-xhci: change behaviour of msix switch
From: |
Cao jin |
Subject: |
[Qemu-devel] [PATCH v3 5/8] hcd-xhci: change behaviour of msix switch |
Date: |
Wed, 14 Sep 2016 15:51:01 +0800 |
Resolve the TODO, msix=auto means msix on; if user specify msix=on,
then device creation fail on msix_init failure.
CC: Gerd Hoffmann <address@hidden>
CC: Michael S. Tsirkin <address@hidden>
CC: Markus Armbruster <address@hidden>
CC: Marcel Apfelbaum <address@hidden>
Signed-off-by: Cao jin <address@hidden>
---
hw/usb/hcd-xhci.c | 35 ++++++++++++++++++++++++-----------
1 file changed, 24 insertions(+), 11 deletions(-)
diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index 59f0239..4280c5d 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -3603,12 +3603,14 @@ static void usb_xhci_realize(struct PCIDevice *dev,
Error **errp)
if (xhci->numintrs < 1) {
xhci->numintrs = 1;
}
+
if (xhci->numslots > MAXSLOTS) {
xhci->numslots = MAXSLOTS;
}
if (xhci->numslots < 1) {
xhci->numslots = 1;
}
+
if (xhci_get_flag(xhci, XHCI_FLAG_ENABLE_STREAMS)) {
xhci->max_pstreams_mask = 7; /* == 256 primary streams */
} else {
@@ -3633,6 +3635,28 @@ static void usb_xhci_realize(struct PCIDevice *dev,
Error **errp)
}
memory_region_init(&xhci->mem, OBJECT(xhci), "xhci", LEN_REGS);
+ if (xhci->msix != ON_OFF_AUTO_OFF) {
+ ret = msix_init(dev, xhci->numintrs,
+ &xhci->mem, 0, OFF_MSIX_TABLE,
+ &xhci->mem, 0, OFF_MSIX_PBA,
+ 0x90, &err);
+ /* Any error other than -ENOTSUP(board's MSI support is broken)
+ * is a programming error */
+ assert(!ret || ret == -ENOTSUP);
+ if (ret && xhci->msix == ON_OFF_AUTO_ON) {
+ /* Can't satisfy user's explicit msix=on request, fail */
+ error_append_hint(&err, "You have to use msix=auto (default) or "
+ "msic=off with this machine type.\n");
+ /* No instance_finalize method, need to free the resource here */
+ object_unref(OBJECT(&xhci->mem));
+ error_propagate(errp, err);
+ return;
+ }
+ assert(!err || xhci->msix == ON_OFF_AUTO_AUTO);
+ /* With msix=auto, we fall back to MSI off silently */
+ error_free(err);
+ }
+
memory_region_init_io(&xhci->mem_cap, OBJECT(xhci), &xhci_cap_ops, xhci,
"capabilities", LEN_CAP);
memory_region_init_io(&xhci->mem_oper, OBJECT(xhci), &xhci_oper_ops, xhci,
@@ -3668,17 +3692,6 @@ static void usb_xhci_realize(struct PCIDevice *dev,
Error **errp)
ret = pcie_endpoint_cap_init(dev, 0xa0);
assert(ret >= 0);
}
-
- if (xhci->msix != ON_OFF_AUTO_OFF) {
- /* TODO check for errors, and should fail when msix=on */
- ret = msix_init(dev, xhci->numintrs,
- &xhci->mem, 0, OFF_MSIX_TABLE,
- &xhci->mem, 0, OFF_MSIX_PBA,
- 0x90, &err);
- if (ret) {
- error_report_err(err);
- }
- }
}
static void usb_xhci_exit(PCIDevice *dev)
--
2.1.0
- [Qemu-devel] [PATCH v3 0/8] Convert msix_init() to error, Cao jin, 2016/09/14
- [Qemu-devel] [PATCH v3 4/8] megasas: change behaviour of msix switch, Cao jin, 2016/09/14
- [Qemu-devel] [PATCH v3 5/8] hcd-xhci: change behaviour of msix switch,
Cao jin <=
- [Qemu-devel] [PATCH v3 2/8] hcd-xhci: check & correct param before using it, Cao jin, 2016/09/14
- [Qemu-devel] [PATCH v3 7/8] megasas: undo the overwrites of msi user configuration, Cao jin, 2016/09/14
- [Qemu-devel] [PATCH v3 8/8] vmxnet3: remove unnecessary internal msix state flag, Cao jin, 2016/09/14