qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [Bug 1433081] Re: kvm hardware error 0xffffffff with vfio-p


From: Thomas Huth
Subject: [Qemu-devel] [Bug 1433081] Re: kvm hardware error 0xffffffff with vfio-pci VGA passthrough
Date: Fri, 04 Nov 2016 16:30:47 -0000

** Project changed: qemu => qemu (Ubuntu)

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1433081

Title:
  kvm hardware error 0xffffffff with vfio-pci VGA passthrough

Status in qemu package in Ubuntu:
  New

Bug description:
  Hi,

  Using smp 2 and cores=2 causes "KVM: entry failed, hardware error
  0xffffffff". When this error occurs, qemu-monitor shows the guest has
  stopped. The error did not occur immediately, but at the point that
  the boot, running from an attached Ubuntu 14.04.1 iso, switched to
  graphical mode after text-mode startup, or after starting the Ubuntu
  guest install.

  The root-cause was verified by changing smp to 1 and cores=1 which
  results in the guest working ok. Tested upto installing Ubuntu 14.04.1
  and updating without any proprietary drivers.

  The boot was from an Ubuntu iso, with the intention of installing an
  ubuntu guest on the attached ide-hd device. The guest was using a
  vfio-pci passthrough GPU connected to an external UHD monitor.

  The commands used to create the disk images:
  qemu-img create -f qcow2 
/media/v2min/Data/VMachines-KVM/KVM-NVidia/kvm-nvidia.img 20G
  qemu-img create -f raw 
/media/v2min/Data/VMachines-KVM/KVM-NVidia/kvm-nvidia.img 20G

  The script vm1 was used to launch the guests with "sudo ./vm1", with
  the only difference between launches being the smp and cores settings.
  With smp 2 and cores=2 this resulted in the terminal below. The
  corresponding dmesg snippets are attached. There were two dmesg
  entries each time the error occurred.

  The same problem occurred when using the latest packages from the
  ppa:jacob/virtualisation. However, when using jacob's packages, it was
  not verified that changing smp to 1 and cores=1 resolves the error (I
  am running this on my primary system and purged jacob's ppa when this
  problem first occured).

  
  ----------------------------------System 
info-----------------------------------------------------------
  Linux v2min 3.18.9-031809-generic #201503080036 SMP Sun Mar 8 00:37:46 UTC 
2015 x86_64 x86_64 x86_64 GNU/Linux

  /var/log/libvirt/libvirt.d is 0 bytes

  Libvirt versions are these:

  address@hidden:~/QCOW2-Error$ dpkg -l | grep libvirt
  ii libvirt-bin 1.2.2-0ubuntu13.1.9 amd64 programs for the libvirt library
  rc libvirt-glib-1.0-0 0.1.6-1ubuntu2 amd64 libvirt glib mainloop integration
  ii libvirt0 1.2.2-0ubuntu13.1.9 amd64 library for interfacing with different 
virtualization systems
  ii python-libvirt 1.2.2-0ubuntu2 amd64 libvirt Python bindings

  address@hidden:~/QCOW2-Error$ dpkg -l | grep qemu
  ii ipxe-qemu 1.0.0+git-20131111.c3d1e78-2ubuntu1.1 all PXE boot firmware - 
ROM images for qemu
  ii qemu-keymaps 2.0.0+dfsg-2ubuntu1.10 all QEMU keyboard maps
  ii qemu-kvm 2.0.0+dfsg-2ubuntu1.10 amd64 QEMU Full virtualization on x86 
hardware (transitional package)
  ii qemu-system-common 2.0.0+dfsg-2ubuntu1.10 amd64 QEMU full system emulation 
binaries (common files)
  ii qemu-system-x86 2.0.0+dfsg-2ubuntu1.10 amd64 QEMU full system emulation 
binaries (x86)
  ii qemu-utils 2.0.0+dfsg-2ubuntu1.10 amd64 QEMU utilities

  Passthrough GPU: Zotac GT 730 2GB.
  Processor: AMD A10-5800K APU
  Primary GPU: Radeon R9-290X

  ------------------------------------------vm1 
script-----------------------------------------------------
  #!/bin/bash

  configfile=/etc/vfio-pci1.cfg

  vfiobind() {
      dev="$1"
          vendor=$(cat /sys/bus/pci/devices/$dev/vendor)
          device=$(cat /sys/bus/pci/devices/$dev/device)
          if [ -e /sys/bus/pci/devices/$dev/driver ]; then
                  echo $dev > /sys/bus/pci/devices/$dev/driver/unbind
          fi
          echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id

  }

  modprobe vfio-pci

  cat $configfile | while read line;do
      echo $line | grep ^# >/dev/null 2>&1 && continue
          vfiobind $line
  done

  sudo qemu-system-x86_64 -enable-kvm -M q35 -m 4096 -cpu host \
  -smp 2,sockets=1,cores=2,threads=1 \
  -bios /usr/share/qemu/bios.bin -vga none \
  -usb -device usb-host,hostbus=5,hostaddr=8 \
  -device 
ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=1,chassis=1,id=root.1 \
  -device vfio-pci,host=04:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on \
  -device vfio-pci,host=04:00.1,bus=root.1,addr=00.1 \
  -drive 
file=/media/v2min/Data/VMachines-KVM/KVM-NVidia/kvm-nvidia.img,id=disk,format=qcow2
 -device ide-hd,bus=ide.0,drive=disk \
  -drive 
file=/media/v2min/Data/Shr/Software/OSes/ubuntu-14.04.1-desktop-amd64.iso,id=isocd
 -device ide-cd,bus=ide.1,drive=isocd \
  -boot menu=on \
  -boot d

  exit 0

  
------------------------------------------------------------gnome-terminal-----------------------------
  address@hidden:~$ sudo ./vm1
  [sudo] password for v2min:
  KVM: entry failed, hardware error 0xffffffff
  RAX=0000000000000005 RBX=0000000000000000 RCX=0000000000000000 
RDX=ffffffff81eaf3e8
  RSI=0000000000000000 RDI=0000000000000000 RBP=ffff880179553930 
RSP=ffff880179553910
  R8 =ffffffff81eaf3e0 R9 =000000000000ffff R10=0000000000000206 
R11=000000000000000f
  R12=ffff880179597b1c R13=0000000000000028 R14=0000000000000000 
R15=ffff880179597800
  RIP=ffffffff8104ed58 RFL=00000046 [---Z-P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
  ES =0000 0000000000000000 ffffffff 00800000
  CS =0010 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA]
  SS =0018 0000000000000000 ffffffff 00c09300 DPL=0 DS [-WA]
  DS =0000 0000000000000000 ffffffff 00800000
  FS =0000 00007f51d8a96880 ffffffff 00800000
  GS =0000 ffff88017fd00000 ffffffff 00800000
  LDT=0000 0000000000000000 0000ffff 00000000
  TR =0040 ffff88017fd11900 00002087 00008b00 DPL=0 TSS64-busy
  GDT= ffff88017fd0a000 0000007f
  IDT= ffffffffff576000 00000fff
  CR0=8005003b CR2=00007f51d8a99000 CR3=00000001740be000 CR4=000406e0
  DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 
DR3=0000000000000000
  DR6=00000000ffff0ff0 DR7=0000000000000400
  EFER=0000000000000d01
  Code=00 01 48 c7 c0 6a b0 00 00 31 db 0f b7 0c 01 b8 05 00 00 00 <0f> 01 c1 
0f 1f 44 00 00 5b 41 5c 41 5d 41 5e 5d c3 89 f0 31 c9 f0 0f b0 0d 9b 06 e6 00 40
  address@hidden:~$ sudo ./vm1
  KVM: entry failed, hardware error 0xffffffff
  RAX=0000000000000005 RBX=0000000000000000 RCX=0000000000000000 
RDX=ffffffff81eaf3e8
  RSI=0000000000000000 RDI=0000000000000000 RBP=ffff88017957f9e8 
RSP=ffff88017957f9c8
  R8 =ffffffff81eaf3e0 R9 =0000000000000000 R10=ffff88017b001d00 
R11=0000000000000246
  R12=ffff880179527ac0 R13=000000000000003e R14=0000000000000000 
R15=0000000000000001
  RIP=ffffffff8104ed58 RFL=00000046 [---Z-P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
  ES =0000 0000000000000000 ffffffff 00800000
  CS =0010 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA]
  SS =0018 0000000000000000 ffffffff 00c09300 DPL=0 DS [-WA]
  DS =0000 0000000000000000 ffffffff 00800000
  FS =0000 00007f49153a6740 ffffffff 00800000
  GS =0000 ffff88017fd00000 ffffffff 00800000
  LDT=0000 0000000000000000 0000ffff 00000000
  TR =0040 ffff88017fd11900 00002087 00008b00 DPL=0 TSS64-busy
  GDT= ffff88017fd0a000 0000007f
  IDT= ffffffffff576000 00000fff
  CR0=8005003b CR2=00007f4914e82170 CR3=0000000001c0e000 CR4=000406e0
  DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 
DR3=0000000000000000
  DR6=00000000ffff0ff0 DR7=0000000000000400
  EFER=0000000000000d01
  Code=00 01 48 c7 c0 6a b0 00 00 31 db 0f b7 0c 01 b8 05 00 00 00 <0f> 01 c1 
0f 1f 44 00 00 5b 41 5c 41 5d 41 5e 5d c3 89 f0 31 c9 f0 0f b0 0d 9b 06 e6 00 40

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1433081/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]