[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 00/30] target-arm queue
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PULL 00/30] target-arm queue |
Date: |
Mon, 27 Feb 2017 18:04:29 +0000 |
ARM queu; includes all the NVIC rewrite patches.
The QOMify-armv7m patchset hasn't got enough review just
yet but I may be able to sneak it in before freeze
tomorrow if it gets review. Didn't want to hold this lot
up waiting, anyway.
thanks
-- PMM
The following changes since commit 8f2d7c341184a95d05476ea3c45dbae2b9ddbe51:
Merge remote-tracking branch
'remotes/berrange/tags/pull-qcrypto-2017-02-27-1' into staging (2017-02-27
15:33:21 +0000)
are available in the git repository at:
git://git.linaro.org/people/pmaydell/qemu-arm.git
tags/pull-target-arm-20170227
for you to fetch changes up to 94d5bcf5a7f3799660b62098a5183f161aad0601:
hw/arm/exynos: Fix proper mapping of CPUs by providing real cluster ID
(2017-02-27 17:23:16 +0000)
----------------------------------------------------------------
target-arm queue:
* raspi2: implement RNG module, GPIO and new SD card controller
(sufficient to boot new raspbian kernels)
* sdhci: bugfixes for block transfers
* virt: fix cpu object reference leak
* Add missing fp_access_check() to aarch64 crypto instructions
* cputlb: Don't assume do_unassigned_access() never returns
* virt: Add a user option to disallow ITS instantiation
* i.MX timers: fix reset handling
* ARMv7M NVIC: rewrite to fix broken priority handling and masking
* exynos: Fix proper mapping of CPUs by providing real cluster ID
* exynos: Fix Linux kernel division by zero for PLLs
----------------------------------------------------------------
Clement Deschamps (4):
bcm2835_sdhost: add bcm2835 sdhost controller
hw/sd: add card-reparenting function
bcm2835_gpio: add bcm2835 gpio controller
bcm2835: add sdhost and gpio controllers
Eric Auger (1):
hw/arm/virt: Add a user option to disallow ITS instantiation
Igor Mammedov (1):
hw/arm/virt: fix cpu object reference leak
Krzysztof Kozlowski (2):
hw/arm/exynos: Fix Linux kernel division by zero for PLLs
hw/arm/exynos: Fix proper mapping of CPUs by providing real cluster ID
Kurban Mallachiev (1):
ARM i.MX timers: fix reset handling
Marcin Chojnacki (1):
target-arm: Implement BCM2835 hardware RNG
Michael Davidsaver (5):
armv7m: Rewrite NVIC to not use any GIC code
arm: gic: Remove references to NVIC
armv7m: Escalate exceptions to HardFault if necessary
armv7m: Simpler and faster exception start
armv7m: VECTCLRACTIVE and VECTRESET are UNPREDICTABLE
Nick Reilly (1):
Add missing fp_access_check() to aarch64 crypto instructions
Peter Maydell (10):
bcm2835_rng: Use qcrypto_random_bytes() rather than rand()
cputlb: Don't assume do_unassigned_access() never returns
armv7m: Rename nvic_state to NVICState
armv7m: Implement reading and writing of PRIGROUP
armv7m: Fix condition check for taking exceptions
armv7m: Remove unused armv7m_nvic_acknowledge_irq() return value
armv7m: Extract "exception taken" code into functions
armv7m: Check exception return consistency
armv7m: Raise correct kind of UsageFault for attempts to execute ARM code
armv7m: Allow SHCSR writes to change pending and active bits
Prasad J Pandit (4):
sd: sdhci: mask transfer mode register value
sd: sdhci: check transfer mode register in multi block transfer
sd: sdhci: conditionally invoke multi block transfer
sd: sdhci: Remove block count enable check in single block transfers
hw/gpio/Makefile.objs | 1 +
hw/misc/Makefile.objs | 3 +-
hw/sd/Makefile.objs | 1 +
hw/intc/gic_internal.h | 7 +-
include/hw/arm/bcm2835_peripherals.h | 6 +
include/hw/arm/virt.h | 1 +
include/hw/gpio/bcm2835_gpio.h | 39 ++
include/hw/misc/bcm2835_rng.h | 27 ++
include/hw/sd/bcm2835_sdhost.h | 48 ++
include/hw/sd/sd.h | 11 +
target/arm/cpu.h | 23 +-
cputlb.c | 15 +-
hw/arm/bcm2835_peripherals.c | 58 ++-
hw/arm/exynos4210.c | 18 +
hw/arm/virt.c | 32 +-
hw/gpio/bcm2835_gpio.c | 353 ++++++++++++++
hw/intc/arm_gic.c | 31 +-
hw/intc/arm_gic_common.c | 23 +-
hw/intc/armv7m_nvic.c | 885 ++++++++++++++++++++++++++++-------
hw/misc/bcm2835_rng.c | 149 ++++++
hw/misc/exynos4210_clk.c | 164 +++++++
hw/sd/bcm2835_sdhost.c | 429 +++++++++++++++++
hw/sd/core.c | 30 ++
hw/sd/sdhci.c | 25 +-
hw/timer/imx_gpt.c | 33 +-
linux-user/main.c | 1 +
target/arm/cpu.c | 16 +-
target/arm/helper.c | 245 +++++++---
target/arm/translate-a64.c | 12 +
target/arm/translate.c | 8 +-
hw/intc/trace-events | 15 +
31 files changed, 2376 insertions(+), 333 deletions(-)
create mode 100644 include/hw/gpio/bcm2835_gpio.h
create mode 100644 include/hw/misc/bcm2835_rng.h
create mode 100644 include/hw/sd/bcm2835_sdhost.h
create mode 100644 hw/gpio/bcm2835_gpio.c
create mode 100644 hw/misc/bcm2835_rng.c
create mode 100644 hw/misc/exynos4210_clk.c
create mode 100644 hw/sd/bcm2835_sdhost.c
- [Qemu-devel] [PULL 00/30] target-arm queue,
Peter Maydell <=
- [Qemu-devel] [PULL 18/30] armv7m: Remove unused armv7m_nvic_acknowledge_irq() return value, Peter Maydell, 2017/02/27
- [Qemu-devel] [PULL 19/30] armv7m: Simpler and faster exception start, Peter Maydell, 2017/02/27
- [Qemu-devel] [PULL 20/30] armv7m: VECTCLRACTIVE and VECTRESET are UNPREDICTABLE, Peter Maydell, 2017/02/27
- [Qemu-devel] [PULL 21/30] armv7m: Extract "exception taken" code into functions, Peter Maydell, 2017/02/27
- [Qemu-devel] [PULL 24/30] armv7m: Allow SHCSR writes to change pending and active bits, Peter Maydell, 2017/02/27
- [Qemu-devel] [PULL 17/30] armv7m: Escalate exceptions to HardFault if necessary, Peter Maydell, 2017/02/27
- [Qemu-devel] [PULL 15/30] armv7m: Fix condition check for taking exceptions, Peter Maydell, 2017/02/27
- [Qemu-devel] [PULL 22/30] armv7m: Check exception return consistency, Peter Maydell, 2017/02/27
- [Qemu-devel] [PULL 26/30] hw/sd: add card-reparenting function, Peter Maydell, 2017/02/27
- [Qemu-devel] [PULL 16/30] arm: gic: Remove references to NVIC, Peter Maydell, 2017/02/27